Uzbekistan State Health Insurance Fund Core
0.9.0 - ci-build Uzbekistan flag

Uzbekistan State Health Insurance Fund Core - Local Development build (v0.9.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: SHIF Prescription - Detailed Descriptions

Draft as of 2026-11-20

Definitions for the shif-prescription resource profile

See the documentation on how to interpret the contents of this table

0. MedicationRequest
Definition

An order or request for both supply of the medication and the instructions for administration of the medication to a patient. The resource is called "MedicationRequest" rather than "MedicationPrescription" or "MedicationOrder" to generalize the use across inpatient and outpatient settings, including care plans, etc., and to harmonize with workflow patterns.

ShortOrdering of medication for patient or group
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate NamesPrescription, Order
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. MedicationRequest.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. MedicationRequest.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. MedicationRequest.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control10..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationRequest.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
8. MedicationRequest.extension:trustee
Slice Nametrustee
Definition

An authorized representative is a person authorized to collect medications from the pharmacy on behalf of the patient based on a written prescription.

ShortAuthorized representative to pick up the medication, either a patronage nurse or a relative
Control0..*
TypeExtension(Trustee) (Extension Type: Reference(UZ Core RelatedPerson, UZ Core PractitionerRole))
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. MedicationRequest.extension:program
Slice Nameprogram
Definition

Program of the State Health Insurance Fund. On a report, the program the report is for: one report covers one program, and the program is data, so the profiles and measures are shared by all programs. On a referral or a prescription, the program the request is issued under: the medical data carry the program, the information system sets it before the request is submitted to the Fund, and the Fund checks at intake that it equals Claim.subType of the claim based on the request.

ShortProgram of the Fund the prescription is issued under; equals Claim.subType of the claim based on it
Control1..1
TypeExtension(SHIF Program) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. MedicationRequest.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. MedicationRequest.identifier
Definition

Identifiers associated with this medication request that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. They are business identifiers assigned to this resource by the performer or other systems and remain constant as the resource is updated and propagates from server to server.

ShortPrescription number in the prescribing information systemExternal ids for this request
Comments

This is a business identifier, not a resource identifier.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..1*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. MedicationRequest.identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUseVS (0.13.0)http://hl7.org/fhir/ValueSet/identifier-use|5.0.0
(required to https://terminology.dhp.uz/fhir/core/ValueSet/identifier-use-vs|0.13.0)
Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. MedicationRequest.identifier.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortDescription of identifier
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control0..1
BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from IdentifierTypeVS (0.13.0)http://hl7.org/fhir/ValueSet/identifier-type|5.0.0
(required to https://terminology.dhp.uz/fhir/core/ValueSet/identifier-type-vs|0.13.0)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. MedicationRequest.identifier.system
Definition

Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

ExampleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. MedicationRequest.identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
This element is affected by the following invariants: ident-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
ExampleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. MedicationRequest.groupIdentifier
Definition

A shared identifier common to multiple independent Request instances that were activated/authorized more or less simultaneously by a single author. The presence of the same identifier on each request ties those requests together and may have business ramifications in terms of reporting of results, billing, etc. E.g. a requisition number shared by a set of lab tests ordered together, or a prescription number shared by all meds ordered at one time.

ShortIdentifier of the prescription the medicine was issued in; shared by the medicines of one prescriptionComposite request this is part of
Control0..1
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Requests are linked either by a "basedOn" relationship (i.e. one request is fulfilling another) or by having a common requisition. Requests that are part of the same requisition are generally treated independently from the perspective of changing their state or maintaining them after initial creation.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. MedicationRequest.status
Definition

A code specifying the current state of the order. Generally, this will be active or completed state.

Shortdraft until decided | active when approved | cancelled when denied | completed when fully dispensed | ended when the term elapses | stoppedactive | on-hold | ended | stopped | completed | cancelled | entered-in-error | draft | unknown
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Clinical decision support systems should take the status into account when determining which medications to include in their algorithms.

Control1..1
BindingThe codes SHALL be taken from MedicationRequestStatusVS (0.13.0)http://hl7.org/fhir/ValueSet/medicationrequest-status|5.0.0
(required to https://terminology.dhp.uz/fhir/core/ValueSet/medicationrequest-status-vs|0.13.0)
Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. MedicationRequest.statusReason
Definition

Reason for the current prescription status, entered by physicians or pharmacists in DMED


Captures the reason for the current state of the MedicationRequest.

ShortReason for prescription status in DMEDReason for current status
Comments

This is generally only used for "exception" statuses such as "suspended" or "cancelled". The reason why the MedicationRequest was created at all is captured in reasonCode, not here.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from For example codes, see MedicationRequestStatusReasonVS (0.13.0)http://hl7.org/fhir/ValueSet/medicationrequest-status-reason|5.0.0
(extensible to https://terminology.dhp.uz/fhir/core/ValueSet/medicationrequest-status-reason-vs|0.13.0)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. MedicationRequest.statusChanged
Definition

The date (and perhaps time) when the status was changed.

ShortWhen the status was changed
Control0..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. MedicationRequest.intent
Definition

Whether the request is a proposal, plan, or an original order.

Shortproposal | plan | order | original-order | reflex-order | filler-order | instance-order | option
Comments

It is expected that the type of requester will be restricted for different stages of a MedicationRequest. For example, Proposals can be created by a patient, relatedPerson, Practitioner or Device. Plans can be created by Practitioners, Patients, RelatedPersons and Devices. Original orders can be created by a Practitioner only.

An instance-order is an instantiation of a request or order and may be used to populate Medication Administration Record.

This element is labeled as a modifier because the intent alters when and how the resource is actually applicable.

Control1..1
BindingThe codes SHALL be taken from MedicationRequestIntentVS (0.13.0)http://hl7.org/fhir/ValueSet/medicationrequest-intent|5.0.0
(required to https://terminology.dhp.uz/fhir/core/ValueSet/medicationrequest-intent-vs|0.13.0)
Typecode
Is Modifiertrue because This element changes the interpretation of all descriptive attributes. For example "the time the request is recommended to occur" vs. "the time the request is authorized to occur" or "who is recommended to perform the request" vs. "who is authorized to perform the request
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Pattern Value
{
  "intent" : "order"
}
<intent value="order"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. MedicationRequest.category
Definition

An arbitrary categorization or grouping of the medication request. It could be used for indicating where meds are intended to be administered, eg. in an inpatient setting or in a patient's home, or a legal category of the medication.

ShortGrouping or category of medication request
Comments

The category can be used to include where the medication is expected to be consumed or other types of requests. The examplar value set represents where the meds are intended to be administered and is just one example of request categorization.

Control0..*
BindingFor example codes, see MedicationRequestAdminLocationVS (0.13.0)http://hl7.org/fhir/ValueSet/medicationrequest-admin-location|5.0.0
(example to https://terminology.dhp.uz/fhir/core/ValueSet/medicationrequest-admin-location-vs|0.13.0)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. MedicationRequest.doNotPerform
Definition

If true, indicates that the provider is asking for the patient to either stop taking or to not start taking the specified medication. For example, the patient is taking an existing medication and the provider is changing their medication. They want to create two seperate requests: one to stop using the current medication and another to start the new medication.

ShortTrue if patient is to stop taking or not to start taking the medication
Comments

If do not perform is not specified, the request is a positive request e.g. "do perform".

Control0..1
Typeboolean
Is Modifiertrue because This element is labeled as a modifier because this element negates the request to occur (ie, this is a request for the medication not to be ordered or prescribed, etc.)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. MedicationRequest.medication
Definition

Identifies the medication being requested. This is a link to a resource that represents the medication which may be the details of the medication or simply an attribute carrying a code that identifies the medication from a known list of medications.

ShortMedicine by its INN; the pharmacy chooses the product at dispensingMedication to be taken
Comments

If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the Medication resource is recommended. For example, if you require form or lot number or if the medication is compounded or extemporaneously prepared, then you must reference the Medication resource.

Control1..1
BindingFor example codes, see SNOMEDCTMedicationCodeshttp://hl7.org/fhir/ValueSet/medication-codes|5.0.0
(example to http://hl7.org/fhir/ValueSet/medication-codes|5.0.0)

A coded concept identifying substance or product that can be ordered.

TypeCodeableReference(UZ Core Medication, Medication)
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. MedicationRequest.medication.concept
Definition

A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.

ShortReference to a concept (by class)
Control10..1
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. MedicationRequest.medication.concept.coding
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control10..*
TypeCoding
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MedicationRequest.medication.concept.coding. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ system

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

44. MedicationRequest.medication.concept.coding:inn
Slice Nameinn
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control10..1*
TypeCoding
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. MedicationRequest.medication.concept.coding:inn.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

ShortIdentity of the terminology system
Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Pattern Value
{
  "system" : "https://terminology.dhp.uz/fhir/core/CodeSystem/inn-medication-name-cs"
}
<system value="https://terminology.dhp.uz/fhir/core/CodeSystem/inn-medication-name-cs"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. MedicationRequest.medication.concept.coding:inn.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

ShortSymbol in syntax defined by the system
Control10..1
This element is affected by the following invariants: cod-1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. MedicationRequest.medication.reference
Definition

A reference to a resource the provides exact details about the information being referenced.

ShortReference to a resource (by instance)
Control0..01
TypeReference
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. MedicationRequest.subject
Definition

The individual or group for whom the medication has been requested.

ShortPatient for whom the prescription is writtenIndividual or group for whom the medication has been requested
Comments

The subject on a medication request is mandatory. For the secondary use case where the actual subject is not provided, there still must be an anonymized subject specified.

Control1..1
TypeReference(SHIF Patient, Patient, Group)
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. MedicationRequest.informationSource
Definition

The person or organization who provided the information about this request, if the source is someone other than the requestor. This is often used when the MedicationRequest is reported by another person.

ShortThe person or organization who provided the information about this request, if the source is someone other than the requestor
Control0..*
TypeReference(UZ Core Patient, UZ Core Practitioner, UZ Core PractitionerRole, UZ Core RelatedPerson, UZ Core Organization, Patient, Practitioner, PractitionerRole, RelatedPerson, Organization)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. MedicationRequest.encounter
Definition

The Encounter during which this [x] was created or to which the creation of this record is tightly associated.

ShortEncounter created as part of encounter/admission/stay
Comments

This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter." If there is a need to link to episodes of care they will be handled with an extension.

Control0..1
TypeReference(UZ Core Encounter, Encounter)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. MedicationRequest.authoredOn
Definition

The date (and perhaps time) when the prescription was initially written or authored on.

ShortDate the prescription was issuedWhen request was initially authored
Control10..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. MedicationRequest.requester
Definition

The individual, organization, or device that initiated the request and has responsibility for its activation.

ShortPrescribing doctor in the healthcare organization, with the specialty; travels in the Bundle of the reservationWho/What requested the Request
Comments

PractitionerRole.organization is expected as a reference by identifier[mohId].

Control10..1
TypeReference(UZ Core PractitionerRole, Practitioner, PractitionerRole, Organization, Patient, RelatedPerson, Device)
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. MedicationRequest.reason
Definition

The reason or the indication for ordering or not ordering the medication.

ShortDiagnosis by ICD-10, possibly with other codings alongsideReason or indication for ordering or not ordering the medication
Comments

This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonReference.

Control10..*
BindingThe codes SHOULD be taken from For example codes, see ConditionCodeVS (0.13.0)http://hl7.org/fhir/ValueSet/condition-code|5.0.0
(preferred to https://terminology.dhp.uz/fhir/core/ValueSet/condition-code-vs|0.13.0)
TypeCodeableReference(UZ Core Condition, UZ Core Observation, Condition, Observation)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. MedicationRequest.reason.concept
Definition

A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.

ShortReference to a concept (by class)
Control10..1
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. MedicationRequest.reason.concept.coding
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control10..*
TypeCoding
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MedicationRequest.reason.concept.coding. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ system

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

68. MedicationRequest.reason.concept.coding:icd10
Slice Nameicd10
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control10..1*
TypeCoding
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. MedicationRequest.reason.concept.coding:icd10.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

ShortIdentity of the terminology system
Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Pattern Value
{
  "system" : "http://hl7.org/fhir/sid/icd-10"
}
<system value="http://hl7.org/fhir/sid/icd-10"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. MedicationRequest.reason.concept.coding:icd10.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

ShortSymbol in syntax defined by the system
Control10..1
This element is affected by the following invariants: cod-1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. MedicationRequest.reason.reference
Definition

A reference to a resource the provides exact details about the information being referenced.

ShortReference to a resource (by instance)
Control0..01
TypeReference
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. MedicationRequest.insurance
Definition

Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be required for delivering the requested service.

ShortThe approved reservation (SHIFPreauthorizationClaimResponse), referenced once the Fund approves itAssociated insurance coverage
Control0..*
TypeReference(Coverage, UZ Core ClaimResponse, ClaimResponse)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. MedicationRequest.note
Definition

Extra information about the prescription that could not be conveyed by the other attributes.

ShortAdditional notes or instructions for the pharmacist/patientInformation about the prescription
Control0..*
TypeAnnotation
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
80. MedicationRequest.effectiveDosePeriod
Definition

The period over which the medication is to be taken. Where there are multiple dosageInstruction lines (for example, tapering doses), this is the earliest date and the latest end date of the dosageInstructions.

ShortPeriod over which the medication is to be taken
Control0..1
TypePeriod
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. MedicationRequest.dosageInstruction
Definition

Specific instructions for how the medication is to be used by the patient.

ShortSpecific instructions for how the medication should be taken
Comments

There are examples where a medication request may include the option of an oral dose or an Intravenous or Intramuscular dose. For example, "Ondansetron 8mg orally or IV twice a day as needed for nausea" or "Compazine® (prochlorperazine) 5-10mg PO or 25mg PR bid prn nausea or vomiting". In these cases, two medication requests would be created that could be grouped together. The decision on which dose and route of administration to use is based on the patient's condition at the time the dose is needed. In general, each prescribed drug will be a separate Medication Request.

When drug orders are grouped together at the time of order entry, but each of the drugs can be manipulated independently e.g. changing the status of one order to "completed" or "cancelled", changing another order status to "on-hold", the method to "group" all of the medication requests together is to use MedicationRequest.groupIdentifier element. All of the orders grouped together in this manner will have the same groupIdentifier, and separately, each order in the group may have a unique identifier.

There are cases that require grouping of Medication orders together when it is necessary to specify optionality e.g. order two drugs at one time, but stating either of these drugs may be used to treat the patient. The use of a RequestOrchestration should be used as a parent for the Medication orders that require this type of grouping. An example when it may be necessary to group medication orders together is when you specify timing relationships e.g. order drug "xyz" with dose 123, then taper the same drug to a different dose after some interval of time precedence: e.g. give drug "abc" followed by drug "def" e.g. give drug 30 minutes before some procedure was performed more generically this supports - hierarchical groups of actions, where each specific action references the action to be performed (in terms of a Request resource), and each group describes additional behavior, relationships, and applicable conditions between the actions in the overall group. Note that one should NOT use the List or Composition resource to accomplish the above requirements. You may use List or Composition for other business requirements, but not to address the specific requirements of grouping medication orders.

Control10..*
TypeDosage
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. MedicationRequest.dosageInstruction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
86. MedicationRequest.dosageInstruction.patientInstruction
Definition

Instructions in terms that are understood by the patient or consumer.

ShortPatient or consumer oriented instructions
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. MedicationRequest.dosageInstruction.timing
Definition

SHOULD BE USED:

  • frequency should be used with period and periodUntil
  • frequency should be used with timeOfDay SHOULD NOT BE USED:
  • 'when' should not be used with 'timeOfDay'
  • event should not be used with bounds[x]
  • bounds[x] should not be used with count
  • event should not be used with period and Frequency
  • event should not be used with timeOfDay and DayOfWeek
  • period should not be used if timeOfDay + Exact Times (Count)
  • period should not be used if when + countMax
  • period should not be used with boundsRange
  • 'dayOfWeek' and 'periodUnit' should not be used together
  • dayOfWeek and timeOfDay should not be used with count
  • dayOfWeek should not be used with boundsRange
  • frequency should not be used with count alone unless there is a cycle

When medication should be administered.

ShortSchedule: frequency and durationWhen medication should be administered
Comments

This attribute might not always be populated while the Dosage.text is expected to be populated. If both are populated, then the Dosage.text should reflect the content of the Dosage.timing.

Control10..1
TypeTiming
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

The timing schedule for giving the medication to the patient. This data type allows many different expressions. For example: "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013". Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. MedicationRequest.dosageInstruction.timing.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
92. MedicationRequest.dosageInstruction.timing.repeat
Definition

A set of rules that describe when the event is scheduled.

ShortWhen the event is to occur
Control0..1
TypeElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Many timing schedules are determined by regular repetitions.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
tim-1: if there's a duration, there needs to be duration units (duration.empty() or durationUnit.exists())
tim-2: if there's a period, there needs to be period units (period.empty() or periodUnit.exists())
tim-4: duration SHALL be a non-negative value (duration.exists() implies duration >= 0)
tim-5: period SHALL be a non-negative value (period.exists() implies period >= 0)
tim-6: If there's a periodMax, there must be a period (periodMax.empty() or period.exists())
tim-7: If there's a durationMax, there must be a duration (durationMax.empty() or duration.exists())
tim-8: If there's a countMax, there must be a count (countMax.empty() or count.exists())
tim-9: If there's an offset, there must be a when (and not C, CM, CD, CV) (offset.empty() or (when.exists() and when.select($this in ('C' | 'CM' | 'CD' | 'CV')).allFalse()))
tim-10: If there's a timeOfDay, there cannot be a when, or vice versa (timeOfDay.empty() or when.empty())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
tim-1: if there's a duration, there needs to be duration units (duration.empty() or durationUnit.exists())
tim-2: if there's a period, there needs to be period units (period.empty() or periodUnit.exists())
tim-4: duration SHALL be a non-negative value (duration.exists() implies duration >= 0)
tim-5: period SHALL be a non-negative value (period.exists() implies period >= 0)
tim-6: If there's a periodMax, there must be a period (periodMax.empty() or period.exists())
tim-7: If there's a durationMax, there must be a duration (durationMax.empty() or duration.exists())
tim-8: If there's a countMax, there must be a count (countMax.empty() or count.exists())
tim-9: If there's an offset, there must be a when (and not C, CM, CD, CV) (offset.empty() or (when.exists() and when.select($this in ('C' | 'CM' | 'CD' | 'CV')).allFalse()))
tim-10: If there's a timeOfDay, there cannot be a when, or vice versa (timeOfDay.empty() or when.empty())
94. MedicationRequest.dosageInstruction.timing.repeat.bounds[x]
Definition

Either a duration for the length of the timing schedule, a range of possible length, or outer bounds for start and/or end limits of the timing schedule.

ShortLength/Range of lengths, or (Start and/or end) limits
Control0..1
TypeChoice of: Duration, Range, Period
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. MedicationRequest.dosageInstruction.timing.repeat.count
Definition

A total count of the desired number of repetitions across the duration of the entire timing specification. If countMax is present, this element indicates the lower bound of the allowed range of count values.

ShortNumber of times to repeat
Comments

If you have both bounds and count, then this should be understood as within the bounds period, until count times happens.

Control0..1
This element is affected by the following invariants: tim-8
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Repetitions may be limited by end time or total occurrences.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
98. MedicationRequest.dosageInstruction.timing.repeat.countMax
Definition

If present, indicates that the count is a range - so to perform the action between [count] and [countMax] times.

ShortMaximum number of times to repeat
Control0..1
This element is affected by the following invariants: tim-8
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. MedicationRequest.dosageInstruction.timing.repeat.duration
Definition

How long this thing happens for when it happens. If durationMax is present, this element indicates the lower bound of the allowed range of the duration.

ShortHow long when it happens
Comments

For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise).

Control0..1
This element is affected by the following invariants: tim-7, tim-1, tim-4
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Some activities are not instantaneous and need to be maintained for a period of time.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. MedicationRequest.dosageInstruction.timing.repeat.durationUnit
Definition

The units of time for the duration, in UCUM units Normal practice is to use the 'mo' code as a calendar month when calculating the next occurrence.

Shorts | min | h | d | wk | mo | a - unit of time (UCUM)
Control0..1
This element is affected by the following invariants: tim-1
BindingThe codes SHALL be taken from UnitsOfTimehttp://hl7.org/fhir/ValueSet/units-of-time|5.0.0
(required to http://hl7.org/fhir/ValueSet/units-of-time|5.0.0)

A unit of time (units from UCUM).

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. MedicationRequest.dosageInstruction.timing.repeat.frequency
Definition

The number of times to repeat the action within the specified period. If frequencyMax is present, this element indicates the lower bound of the allowed range of the frequency.

ShortIndicates the number of repetitions that should occur within a period. I.e. Event occurs frequency times per period
Control0..1
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Meaning if MissingIf no frequency is stated, the assumption is that the event occurs once per period, but systems SHOULD always be specific about this
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. MedicationRequest.dosageInstruction.timing.repeat.period
Definition

Indicates the duration of time over which repetitions are to occur; e.g. to express "3 times per day", 3 would be the frequency and "1 day" would be the period. If periodMax is present, this element indicates the lower bound of the allowed range of the period length.

ShortThe duration to which the frequency applies. I.e. Event occurs frequency times per period
Control0..1
This element is affected by the following invariants: tim-6, tim-5, tim-2
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
108. MedicationRequest.dosageInstruction.timing.repeat.periodUnit
Definition

The units of time for the period in UCUM units Normal practice is to use the 'mo' code as a calendar month when calculating the next occurrence.

Shorts | min | h | d | wk | mo | a - unit of time (UCUM)
Control0..1
This element is affected by the following invariants: tim-2
BindingThe codes SHALL be taken from UnitsOfTimehttp://hl7.org/fhir/ValueSet/units-of-time|5.0.0
(required to http://hl7.org/fhir/ValueSet/units-of-time|5.0.0)

A unit of time (units from UCUM).

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
110. MedicationRequest.dosageInstruction.timing.repeat.dayOfWeek
Definition

If one or more days of week is provided, then the action happens only on the specified day(s).

Shortmon | tue | wed | thu | fri | sat | sun
Comments

If no days are specified, the action is assumed to happen every day as otherwise specified.

Control0..*
BindingThe codes SHALL be taken from DaysOfWeekVS (0.13.0)http://hl7.org/fhir/ValueSet/days-of-week|5.0.0
(required to https://terminology.dhp.uz/fhir/core/ValueSet/days-of-week-vs|0.13.0)
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
112. MedicationRequest.dosageInstruction.timing.repeat.timeOfDay
Definition

Specified time of day for action to take place.

ShortTime of day for action
Comments

When time of day is specified, it is inferred that the action happens every day (as filtered by dayofWeek) on the specified times. If there's a timeOfDay, there cannot be a when, or vice versa.

Control0..*
This element is affected by the following invariants: tim-10
Typetime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
114. MedicationRequest.dosageInstruction.timing.repeat.when
Definition

An approximate time period during the day, potentially linked to an event of daily living that indicates when the action should occur.

ShortCode for time period of occurrence
Comments

When more than one event is listed, the event is tied to the union of the specified events.

Control0..*
This element is affected by the following invariants: tim-9, tim-10
BindingThe codes SHALL be taken from EventTimingVS (0.13.0)http://hl7.org/fhir/ValueSet/event-timing|5.0.0
(required to https://terminology.dhp.uz/fhir/core/ValueSet/event-timing-vs|0.13.0)
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Timings are frequently determined by occurrences such as waking, eating and sleep.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
116. MedicationRequest.dosageInstruction.timing.code
Definition

A code for the timing schedule (or just text in code.text). Some codes such as BID are ubiquitous, but many institutions define their own additional codes. If a code is provided, the code is understood to be a complete statement of whatever is specified in the structured timing data, and either the code or the data may be used to interpret the Timing, with the exception that .repeat.bounds still applies over the code (and is not contained in the code).

ShortC | BID | TID | QID | AM | PM | QD | QOD | +
Comments

BID etc. are defined as 'at institutionally specified times'. For example, an institution may choose that BID is "always at 7am and 6pm". If it is inappropriate for this choice to be made, the code BID should not be used. Instead, a distinct organization-specific code should be used in place of the HL7-defined BID code and/or a structured representation should be used (in this case, specifying the two event times).

Control0..1
BindingThe codes SHOULD be taken from TimingAbbreviationVS (0.13.0)http://hl7.org/fhir/ValueSet/timing-abbreviation|5.0.0
(preferred to https://terminology.dhp.uz/fhir/core/ValueSet/timing-abbreviation-vs|0.13.0)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
118. MedicationRequest.dosageInstruction.route
Definition

How drug should enter body.

ShortRoute of medication administrationHow drug should enter body
Control0..1
BindingUnless not suitable, these codes SHALL be taken from For example codes, see RouteCodeVS (0.13.0)http://hl7.org/fhir/ValueSet/route-codes|5.0.0
(extensible to https://terminology.dhp.uz/fhir/core/ValueSet/route-code-vs|0.13.0)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
120. MedicationRequest.dosageInstruction.doseAndRate
Definition

Depending on the resource,this is the amount of medication administered, to be administered or typical amount to be administered.

ShortSingle doseAmount of medication administered, to be administered or typical amount to be administered
Control10..*
TypeElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
122. MedicationRequest.dosageInstruction.doseAndRate.dose[x]
Definition

Amount of medication per dose.

ShortAmount of medication per dose
Comments

Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours.

Control0..1
TypeChoice of: Range, Quantity(SimpleQuantity The snapshot does not say whether the constraints on the root of this type profile have been applied to this element, so assume they have not. Check the type profile directly as well)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summarytrue
Requirements

The amount of therapeutic or other substance given at one administration event.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MedicationRequest.dosageInstruction.doseAndRate.dose[x]. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
124. MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity
Slice NamedoseQuantity
Definition

Amount of medication per dose.

ShortAmount of medication per dose
Comments

Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours.

Control0..1
TypeQuantity(SimpleQuantity), Range
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

The amount of therapeutic or other substance given at one administration event.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
126. MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity.value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control0..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
128. MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity.comparator
Definition

Not allowed to be used in this context


How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..01
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
130. MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity.unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
132. MedicationRequest.dispenseRequest
Definition

Indicates the specific details for the dispense or medication supply part of a medication request (also known as a Medication Prescription or Medication Order). Note that this information is not always sent with the order. There may be in some settings (e.g. hospitals) institutional or system support for completing the dispense details in the pharmacy department.

ShortMedication supply authorization
Control10..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
134. MedicationRequest.dispenseRequest.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
136. MedicationRequest.dispenseRequest.validityPeriod
Definition

This indicates the validity period of a prescription (stale dating the Prescription).

ShortTerm of the prescription: preliminary in draft, set equal to ClaimResponse.preAuthPeriod once the reservation is approvedTime period supply is authorized for
Comments

It reflects the prescribers' perspective for the validity of the prescription. Dispenses must not be made against the prescription outside of this period. The lower-bound of the Dispensing Window signifies the earliest date that the prescription can be filled for the first time. If an upper-bound is not specified then the Prescription is open-ended or will default to a stale-date based on regulations.

Control10..1
TypePeriod
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Indicates when the Prescription becomes valid, and when it ceases to be a dispensable Prescription.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
138. MedicationRequest.dispenseRequest.validityPeriod.start
Definition

The start of the period. The boundary is inclusive.

ShortPrescription issue dateStarting time with inclusive boundary
Comments

If the low element is missing, the meaning is that the low boundary is not known.

Control0..1
This element is affected by the following invariants: per-1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
140. MedicationRequest.dispenseRequest.validityPeriod.end
Definition

The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

ShortPrescription expiration dateEnd time with inclusive boundary, if not ongoing
Comments

The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

Control0..1
This element is affected by the following invariants: per-1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
142. MedicationRequest.dispenseRequest.quantity
Definition

The amount that is to be dispensed for one fill.

ShortAmount of medication to supply per dispense
Control10..1
TypeQuantity(SimpleQuantity)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
144. MedicationRequest.dispenseRequest.dispenser
Definition

Indicates the intended performing Organization that will dispense the medication as specified by the prescriber.

ShortPharmacy where this prescription can be dispensedIntended performer of dispense
Control0..1
TypeReference(UZ Core Organization, Organization)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

See the documentation on how to interpret the contents of this table

0. MedicationRequest
2. MedicationRequest.extension
Control1..?
4. MedicationRequest.extension:program
Slice Nameprogram
ShortProgram of the Fund the prescription is issued under; equals Claim.subType of the claim based on it
Control1..1
TypeExtension(SHIF Program) (Extension Type: CodeableConcept)
Must Supporttrue
6. MedicationRequest.identifier
ShortPrescription number in the prescribing information system
NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..1
8. MedicationRequest.identifier.system
Control1..?
Must Supporttrue
10. MedicationRequest.identifier.value
Control1..?
12. MedicationRequest.groupIdentifier
ShortIdentifier of the prescription the medicine was issued in; shared by the medicines of one prescription
Must Supporttrue
14. MedicationRequest.status
Shortdraft until decided | active when approved | cancelled when denied | completed when fully dispensed | ended when the term elapses | stopped
16. MedicationRequest.intent
Pattern Value
{
  "intent" : "order"
}
<intent value="order"/>
18. MedicationRequest.medication
ShortMedicine by its INN; the pharmacy chooses the product at dispensing
20. MedicationRequest.medication.concept
Control1..?
Must Supporttrue
22. MedicationRequest.medication.concept.coding
Control1..?
Must Supporttrue
SlicingThis element introduces a set of slices on MedicationRequest.medication.concept.coding. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ system

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

24. MedicationRequest.medication.concept.coding:inn
Slice Nameinn
Control1..1
Must Supporttrue
26. MedicationRequest.medication.concept.coding:inn.system
Control1..?
Pattern Value
{
  "system" : "https://terminology.dhp.uz/fhir/core/CodeSystem/inn-medication-name-cs"
}
<system value="https://terminology.dhp.uz/fhir/core/CodeSystem/inn-medication-name-cs"/>
28. MedicationRequest.medication.concept.coding:inn.code
Control1..?
30. MedicationRequest.medication.reference
Control0..0
32. MedicationRequest.subject
TypeReference(SHIF Patient)
34. MedicationRequest.authoredOn
ShortDate the prescription was issued
Control1..?
36. MedicationRequest.requester
ShortPrescribing doctor in the healthcare organization, with the specialty; travels in the Bundle of the reservation
Comments

PractitionerRole.organization is expected as a reference by identifier[mohId].

Control1..?
TypeReference(UZ Core PractitionerRole)
38. MedicationRequest.reason
ShortDiagnosis by ICD-10, possibly with other codings alongside
Control1..?
40. MedicationRequest.reason.concept
Control1..?
Must Supporttrue
42. MedicationRequest.reason.concept.coding
Control1..?
Must Supporttrue
SlicingThis element introduces a set of slices on MedicationRequest.reason.concept.coding. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ system

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

44. MedicationRequest.reason.concept.coding:icd10
Slice Nameicd10
Control1..1
Must Supporttrue
46. MedicationRequest.reason.concept.coding:icd10.system
Control1..?
Pattern Value
{
  "system" : "http://hl7.org/fhir/sid/icd-10"
}
<system value="http://hl7.org/fhir/sid/icd-10"/>
48. MedicationRequest.reason.concept.coding:icd10.code
Control1..?
50. MedicationRequest.reason.reference
Control0..0
52. MedicationRequest.insurance
ShortThe approved reservation (SHIFPreauthorizationClaimResponse), referenced once the Fund approves it
54. MedicationRequest.dosageInstruction
Control1..?
56. MedicationRequest.dosageInstruction.timing
ShortSchedule: frequency and duration
Control1..?
58. MedicationRequest.dosageInstruction.doseAndRate
ShortSingle dose
Control1..?
60. MedicationRequest.dispenseRequest
Control1..?
62. MedicationRequest.dispenseRequest.validityPeriod
ShortTerm of the prescription: preliminary in draft, set equal to ClaimResponse.preAuthPeriod once the reservation is approved
Control1..?
64. MedicationRequest.dispenseRequest.quantity
Control1..?

See the documentation on how to interpret the contents of this table

0. MedicationRequest
Definition

An order or request for both supply of the medication and the instructions for administration of the medication to a patient. The resource is called "MedicationRequest" rather than "MedicationPrescription" or "MedicationOrder" to generalize the use across inpatient and outpatient settings, including care plans, etc., and to harmonize with workflow patterns.

ShortOrdering of medication for patient or group
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate NamesPrescription, Order
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. MedicationRequest.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

Control0..1
Typeid
Is Modifierfalse
Must Supportfalse
Summarytrue
4. MedicationRequest.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. MedicationRequest.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. MedicationRequest.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHALL be taken from AllLanguages
(required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

IETF language tag for a human language

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. MedicationRequest.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
This element is affected by the following invariants: dom-6
TypeNarrative
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. MedicationRequest.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. MedicationRequest.extension
Definition

An Extension

ShortExtension
Control1..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationRequest.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
16. MedicationRequest.extension:trustee
Slice Nametrustee
Definition

An authorized representative is a person authorized to collect medications from the pharmacy on behalf of the patient based on a written prescription.

ShortAuthorized representative to pick up the medication, either a patronage nurse or a relative
Control0..*
TypeExtension(Trustee) (Extension Type: Reference(UZ Core RelatedPerson, UZ Core PractitionerRole))
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. MedicationRequest.extension:program
Slice Nameprogram
Definition

Program of the State Health Insurance Fund. On a report, the program the report is for: one report covers one program, and the program is data, so the profiles and measures are shared by all programs. On a referral or a prescription, the program the request is issued under: the medical data carry the program, the information system sets it before the request is submitted to the Fund, and the Fund checks at intake that it equals Claim.subType of the claim based on the request.

ShortProgram of the Fund the prescription is issued under; equals Claim.subType of the claim based on it
Control1..1
TypeExtension(SHIF Program) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. MedicationRequest.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. MedicationRequest.identifier
Definition

Identifiers associated with this medication request that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. They are business identifiers assigned to this resource by the performer or other systems and remain constant as the resource is updated and propagates from server to server.

ShortPrescription number in the prescribing information system
Comments

This is a business identifier, not a resource identifier.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..1
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. MedicationRequest.identifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
26. MedicationRequest.identifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationRequest.identifier.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
28. MedicationRequest.identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUseVS (0.13.0)
(required to https://terminology.dhp.uz/fhir/core/ValueSet/identifier-use-vs|0.13.0)
Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. MedicationRequest.identifier.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortDescription of identifier
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control0..1
BindingThe codes SHALL be taken from IdentifierTypeVS (0.13.0)
(required to https://terminology.dhp.uz/fhir/core/ValueSet/identifier-type-vs|0.13.0)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. MedicationRequest.identifier.system
Definition

Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control1..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

ExampleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. MedicationRequest.identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control1..1
This element is affected by the following invariants: ident-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
ExampleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. MedicationRequest.identifier.period
Definition

Time period during which identifier is/was valid for use.

ShortTime period when id is/was valid for use
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. MedicationRequest.identifier.assigner
Definition

Organization that issued/manages the identifier.

ShortOrganization that issued id (may be just text)
Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Control0..1
TypeReference(Organization)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. MedicationRequest.basedOn
Definition

A plan or request that is fulfilled in whole or in part by this medication request.

ShortA plan or request that is fulfilled in whole or in part by this medication request
Control0..*
TypeReference(CarePlan, MedicationRequest, ServiceRequest, ImmunizationRecommendation)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. MedicationRequest.priorPrescription
Definition

Reference to an order/prescription that is being replaced by this MedicationRequest.

ShortReference to an order/prescription that is being replaced by this MedicationRequest
Control0..1
TypeReference(MedicationRequest)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. MedicationRequest.groupIdentifier
Definition

A shared identifier common to multiple independent Request instances that were activated/authorized more or less simultaneously by a single author. The presence of the same identifier on each request ties those requests together and may have business ramifications in terms of reporting of results, billing, etc. E.g. a requisition number shared by a set of lab tests ordered together, or a prescription number shared by all meds ordered at one time.

ShortIdentifier of the prescription the medicine was issued in; shared by the medicines of one prescription
Control0..1
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Requests are linked either by a "basedOn" relationship (i.e. one request is fulfilling another) or by having a common requisition. Requests that are part of the same requisition are generally treated independently from the perspective of changing their state or maintaining them after initial creation.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. MedicationRequest.status
Definition

A code specifying the current state of the order. Generally, this will be active or completed state.

Shortdraft until decided | active when approved | cancelled when denied | completed when fully dispensed | ended when the term elapses | stopped
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Clinical decision support systems should take the status into account when determining which medications to include in their algorithms.

Control1..1
BindingThe codes SHALL be taken from MedicationRequestStatusVS (0.13.0)
(required to https://terminology.dhp.uz/fhir/core/ValueSet/medicationrequest-status-vs|0.13.0)
Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. MedicationRequest.statusReason
Definition

Reason for the current prescription status, entered by physicians or pharmacists in DMED

ShortReason for prescription status in DMED
Comments

This is generally only used for "exception" statuses such as "suspended" or "cancelled". The reason why the MedicationRequest was created at all is captured in reasonCode, not here.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from MedicationRequestStatusReasonVS (0.13.0)
(extensible to https://terminology.dhp.uz/fhir/core/ValueSet/medicationrequest-status-reason-vs|0.13.0)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. MedicationRequest.statusChanged
Definition

The date (and perhaps time) when the status was changed.

ShortWhen the status was changed
Control0..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. MedicationRequest.intent
Definition

Whether the request is a proposal, plan, or an original order.

Shortproposal | plan | order | original-order | reflex-order | filler-order | instance-order | option
Comments

It is expected that the type of requester will be restricted for different stages of a MedicationRequest. For example, Proposals can be created by a patient, relatedPerson, Practitioner or Device. Plans can be created by Practitioners, Patients, RelatedPersons and Devices. Original orders can be created by a Practitioner only.

An instance-order is an instantiation of a request or order and may be used to populate Medication Administration Record.

This element is labeled as a modifier because the intent alters when and how the resource is actually applicable.

Control1..1
BindingThe codes SHALL be taken from MedicationRequestIntentVS (0.13.0)
(required to https://terminology.dhp.uz/fhir/core/ValueSet/medicationrequest-intent-vs|0.13.0)
Typecode
Is Modifiertrue because This element changes the interpretation of all descriptive attributes. For example "the time the request is recommended to occur" vs. "the time the request is authorized to occur" or "who is recommended to perform the request" vs. "who is authorized to perform the request
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Pattern Value
{
  "intent" : "order"
}
<intent value="order"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. MedicationRequest.category
Definition

An arbitrary categorization or grouping of the medication request. It could be used for indicating where meds are intended to be administered, eg. in an inpatient setting or in a patient's home, or a legal category of the medication.

ShortGrouping or category of medication request
Comments

The category can be used to include where the medication is expected to be consumed or other types of requests. The examplar value set represents where the meds are intended to be administered and is just one example of request categorization.

Control0..*
BindingFor example codes, see MedicationRequestAdminLocationVS (0.13.0)
(example to https://terminology.dhp.uz/fhir/core/ValueSet/medicationrequest-admin-location-vs|0.13.0)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. MedicationRequest.priority
Definition

Indicates how quickly the Medication Request should be addressed with respect to other requests.

Shortroutine | urgent | asap | stat
Control0..1
BindingThe codes SHALL be taken from RequestPriority
(required to http://hl7.org/fhir/ValueSet/request-priority|5.0.0)

Identifies the level of importance to be assigned to actioning the request.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. MedicationRequest.doNotPerform
Definition

If true, indicates that the provider is asking for the patient to either stop taking or to not start taking the specified medication. For example, the patient is taking an existing medication and the provider is changing their medication. They want to create two seperate requests: one to stop using the current medication and another to start the new medication.

ShortTrue if patient is to stop taking or not to start taking the medication
Comments

If do not perform is not specified, the request is a positive request e.g. "do perform".

Control0..1
Typeboolean
Is Modifiertrue because This element is labeled as a modifier because this element negates the request to occur (ie, this is a request for the medication not to be ordered or prescribed, etc.)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. MedicationRequest.medication
Definition

Identifies the medication being requested. This is a link to a resource that represents the medication which may be the details of the medication or simply an attribute carrying a code that identifies the medication from a known list of medications.

ShortMedicine by its INN; the pharmacy chooses the product at dispensing
Comments

If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the Medication resource is recommended. For example, if you require form or lot number or if the medication is compounded or extemporaneously prepared, then you must reference the Medication resource.

Control1..1
BindingFor example codes, see SNOMEDCTMedicationCodes
(example to http://hl7.org/fhir/ValueSet/medication-codes|5.0.0)

A coded concept identifying substance or product that can be ordered.

TypeCodeableReference(UZ Core Medication)
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. MedicationRequest.medication.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
64. MedicationRequest.medication.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationRequest.medication.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
66. MedicationRequest.medication.concept
Definition

A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.

ShortReference to a concept (by class)
Control1..1
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. MedicationRequest.medication.concept.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
70. MedicationRequest.medication.concept.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationRequest.medication.concept.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
72. MedicationRequest.medication.concept.coding
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control1..*
TypeCoding
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MedicationRequest.medication.concept.coding. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ system

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

74. MedicationRequest.medication.concept.coding:inn
Slice Nameinn
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control1..1
TypeCoding
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. MedicationRequest.medication.concept.coding:inn.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
78. MedicationRequest.medication.concept.coding:inn.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationRequest.medication.concept.coding.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
80. MedicationRequest.medication.concept.coding:inn.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

ShortIdentity of the terminology system
Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.

Control1..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Pattern Value
{
  "system" : "https://terminology.dhp.uz/fhir/core/CodeSystem/inn-medication-name-cs"
}
<system value="https://terminology.dhp.uz/fhir/core/CodeSystem/inn-medication-name-cs"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. MedicationRequest.medication.concept.coding:inn.version
Definition

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

ShortVersion of the system - if relevant
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

NoteThis is a business version Id, not a resource version Id (see discussion)
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. MedicationRequest.medication.concept.coding:inn.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

ShortSymbol in syntax defined by the system
Control1..1
This element is affected by the following invariants: cod-1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. MedicationRequest.medication.concept.coding:inn.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

ShortRepresentation defined by the system
Control0..1
This element is affected by the following invariants: cod-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. MedicationRequest.medication.concept.coding:inn.userSelected
Definition

Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

ShortIf this coding was chosen directly by the user
Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. MedicationRequest.medication.concept.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortPlain text representation of the concept
Comments

Very often the text is the same as a displayName of one of the codings.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. MedicationRequest.medication.reference
Definition

A reference to a resource the provides exact details about the information being referenced.

ShortReference to a resource (by instance)
Control0..0
TypeReference
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. MedicationRequest.subject
Definition

The individual or group for whom the medication has been requested.

ShortPatient for whom the prescription is written
Comments

The subject on a medication request is mandatory. For the secondary use case where the actual subject is not provided, there still must be an anonymized subject specified.

Control1..1
TypeReference(SHIF Patient)
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. MedicationRequest.informationSource
Definition

The person or organization who provided the information about this request, if the source is someone other than the requestor. This is often used when the MedicationRequest is reported by another person.

ShortThe person or organization who provided the information about this request, if the source is someone other than the requestor
Control0..*
TypeReference(UZ Core Patient, UZ Core Practitioner, UZ Core PractitionerRole, UZ Core RelatedPerson, UZ Core Organization)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
98. MedicationRequest.encounter
Definition

The Encounter during which this [x] was created or to which the creation of this record is tightly associated.

ShortEncounter created as part of encounter/admission/stay
Comments

This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter." If there is a need to link to episodes of care they will be handled with an extension.

Control0..1
TypeReference(UZ Core Encounter)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. MedicationRequest.supportingInformation
Definition

Information to support fulfilling (i.e. dispensing or administering) of the medication, for example, patient height and weight, a MedicationStatement for the patient).

ShortInformation to support fulfilling of the medication
Comments

This attribute can be used to reference a MedicationStatement about the patients' medication use.

Control0..*
TypeReference(Resource)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. MedicationRequest.authoredOn
Definition

The date (and perhaps time) when the prescription was initially written or authored on.

ShortDate the prescription was issued
Control1..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. MedicationRequest.requester
Definition

The individual, organization, or device that initiated the request and has responsibility for its activation.

ShortPrescribing doctor in the healthcare organization, with the specialty; travels in the Bundle of the reservation
Comments

PractitionerRole.organization is expected as a reference by identifier[mohId].

Control1..1
TypeReference(UZ Core PractitionerRole)
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. MedicationRequest.reported
Definition

Indicates if this record was captured as a secondary 'reported' record rather than as an original primary source-of-truth record. It may also indicate the source of the report.

ShortReported rather than primary record
Comments

If not populated, then assume that this is the original record and not reported

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
108. MedicationRequest.performerType
Definition

Indicates the type of performer of the administration of the medication.

ShortDesired kind of performer of the medication administration
Comments

If specified without indicating a performer, this indicates that the performer must be of the specified type. If specified with a performer then it indicates the requirements of the performer if the designated performer is not available.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from MedicationIntendedPerformerRole
(extensible to http://hl7.org/fhir/ValueSet/medication-intended-performer-role|5.0.0)

Identifies the type of individual that is desired to administer the medication.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
110. MedicationRequest.performer
Definition

The specified desired performer of the medication treatment (e.g. the performer of the medication administration). For devices, this is the device that is intended to perform the administration of the medication. An IV Pump would be an example of a device that is performing the administration. Both the IV Pump and the practitioner that set the rate or bolus on the pump can be listed as performers.

ShortIntended performer of administration
Control0..*
TypeReference(Practitioner, PractitionerRole, Organization, Patient, DeviceDefinition, RelatedPerson, CareTeam, HealthcareService)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
112. MedicationRequest.device
Definition

The intended type of device that is to be used for the administration of the medication (for example, PCA Pump).

ShortIntended type of device for the administration
Control0..*
TypeCodeableReference(DeviceDefinition)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
114. MedicationRequest.recorder
Definition

The person who entered the order on behalf of another individual for example in the case of a verbal or a telephone order.

ShortPerson who entered the request
Control0..1
TypeReference(Practitioner, PractitionerRole)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
116. MedicationRequest.reason
Definition

The reason or the indication for ordering or not ordering the medication.

ShortDiagnosis by ICD-10, possibly with other codings alongside
Comments

This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonReference.

Control1..*
BindingThe codes SHOULD be taken from ConditionCodeVS (0.13.0)
(preferred to https://terminology.dhp.uz/fhir/core/ValueSet/condition-code-vs|0.13.0)
TypeCodeableReference(UZ Core Condition, UZ Core Observation)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
118. MedicationRequest.reason.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
120. MedicationRequest.reason.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationRequest.reason.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
122. MedicationRequest.reason.concept
Definition

A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.

ShortReference to a concept (by class)
Control1..1
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
124. MedicationRequest.reason.concept.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
126. MedicationRequest.reason.concept.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationRequest.reason.concept.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
128. MedicationRequest.reason.concept.coding
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control1..*
TypeCoding
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MedicationRequest.reason.concept.coding. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ system

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

130. MedicationRequest.reason.concept.coding:icd10
Slice Nameicd10
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control1..1
TypeCoding
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
132. MedicationRequest.reason.concept.coding:icd10.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
134. MedicationRequest.reason.concept.coding:icd10.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationRequest.reason.concept.coding.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
136. MedicationRequest.reason.concept.coding:icd10.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

ShortIdentity of the terminology system
Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.

Control1..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Pattern Value
{
  "system" : "http://hl7.org/fhir/sid/icd-10"
}
<system value="http://hl7.org/fhir/sid/icd-10"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
138. MedicationRequest.reason.concept.coding:icd10.version
Definition

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

ShortVersion of the system - if relevant
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

NoteThis is a business version Id, not a resource version Id (see discussion)
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
140. MedicationRequest.reason.concept.coding:icd10.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

ShortSymbol in syntax defined by the system
Control1..1
This element is affected by the following invariants: cod-1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
142. MedicationRequest.reason.concept.coding:icd10.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

ShortRepresentation defined by the system
Control0..1
This element is affected by the following invariants: cod-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
144. MedicationRequest.reason.concept.coding:icd10.userSelected
Definition

Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

ShortIf this coding was chosen directly by the user
Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
146. MedicationRequest.reason.concept.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortPlain text representation of the concept
Comments

Very often the text is the same as a displayName of one of the codings.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
148. MedicationRequest.reason.reference
Definition

A reference to a resource the provides exact details about the information being referenced.

ShortReference to a resource (by instance)
Control0..0
TypeReference
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
150. MedicationRequest.courseOfTherapyType
Definition

The description of the overall pattern of the administration of the medication to the patient.

ShortOverall pattern of medication administration
Comments

This attribute should not be confused with the protocol of the medication.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from MedicationRequestCourseOfTherapyCodes
(extensible to http://hl7.org/fhir/ValueSet/medicationrequest-course-of-therapy|5.0.0)

Identifies the overall pattern of medication administratio.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
152. MedicationRequest.insurance
Definition

Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be required for delivering the requested service.

ShortThe approved reservation (SHIFPreauthorizationClaimResponse), referenced once the Fund approves it
Control0..*
TypeReference(Coverage, UZ Core ClaimResponse)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
154. MedicationRequest.note
Definition

Extra information about the prescription that could not be conveyed by the other attributes.

ShortAdditional notes or instructions for the pharmacist/patient
Control0..*
TypeAnnotation
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
156. MedicationRequest.renderedDosageInstruction
Definition

The full representation of the dose of the medication included in all dosage instructions. To be used when multiple dosage instructions are included to represent complex dosing such as increasing or tapering doses.

ShortFull representation of the dosage instructions
Control0..1
Typemarkdown
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Requirements

The content of the renderedDosageInstructions must not be different than the dose represented in the dosageInstruction content.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
158. MedicationRequest.effectiveDosePeriod
Definition

The period over which the medication is to be taken. Where there are multiple dosageInstruction lines (for example, tapering doses), this is the earliest date and the latest end date of the dosageInstructions.

ShortPeriod over which the medication is to be taken
Control0..1
TypePeriod
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
160. MedicationRequest.dosageInstruction
Definition

Specific instructions for how the medication is to be used by the patient.

ShortSpecific instructions for how the medication should be taken
Comments

There are examples where a medication request may include the option of an oral dose or an Intravenous or Intramuscular dose. For example, "Ondansetron 8mg orally or IV twice a day as needed for nausea" or "Compazine® (prochlorperazine) 5-10mg PO or 25mg PR bid prn nausea or vomiting". In these cases, two medication requests would be created that could be grouped together. The decision on which dose and route of administration to use is based on the patient's condition at the time the dose is needed. In general, each prescribed drug will be a separate Medication Request.

When drug orders are grouped together at the time of order entry, but each of the drugs can be manipulated independently e.g. changing the status of one order to "completed" or "cancelled", changing another order status to "on-hold", the method to "group" all of the medication requests together is to use MedicationRequest.groupIdentifier element. All of the orders grouped together in this manner will have the same groupIdentifier, and separately, each order in the group may have a unique identifier.

There are cases that require grouping of Medication orders together when it is necessary to specify optionality e.g. order two drugs at one time, but stating either of these drugs may be used to treat the patient. The use of a RequestOrchestration should be used as a parent for the Medication orders that require this type of grouping. An example when it may be necessary to group medication orders together is when you specify timing relationships e.g. order drug "xyz" with dose 123, then taper the same drug to a different dose after some interval of time precedence: e.g. give drug "abc" followed by drug "def" e.g. give drug 30 minutes before some procedure was performed more generically this supports - hierarchical groups of actions, where each specific action references the action to be performed (in terms of a Request resource), and each group describes additional behavior, relationships, and applicable conditions between the actions in the overall group. Note that one should NOT use the List or Composition resource to accomplish the above requirements. You may use List or Composition for other business requirements, but not to address the specific requirements of grouping medication orders.

Control1..*
TypeDosage
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
162. MedicationRequest.dosageInstruction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
164. MedicationRequest.dosageInstruction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationRequest.dosageInstruction.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
166. MedicationRequest.dosageInstruction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
168. MedicationRequest.dosageInstruction.sequence
Definition

Indicates the order in which the dosage instructions should be applied or interpreted.

ShortThe order of the dosage instructions
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

If the sequence number of multiple Dosages is the same, then it is implied that the instructions are to be treated as concurrent. If the sequence number is different, then the Dosages are intended to be sequential.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
170. MedicationRequest.dosageInstruction.text
Definition

Free text dosage instructions e.g. SIG.

ShortFree text dosage instructions e.g. SIG
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Free text dosage instructions can be used for cases where the instructions are too complex to code. The content of this attribute does not include the name or description of the medication. When coded instructions are present, the free text instructions may still be present for display to humans taking or administering the medication. It is expected that the text instructions will always be populated. If the dosage.timing attribute is also populated, then the dosage.text should reflect the same information as the timing. Additional information about administration or preparation of the medication should be included as text.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
172. MedicationRequest.dosageInstruction.additionalInstruction
Definition

Supplemental instructions to the patient on how to take the medication (e.g. "with meals" or"take half to one hour before food") or warnings for the patient about the medication (e.g. "may cause drowsiness" or "avoid exposure of skin to direct sunlight or sunlamps").

ShortSupplemental instruction or warnings to the patient - e.g. "with meals", "may cause drowsiness"
Comments

Information about administration or preparation of the medication (e.g. "infuse as rapidly as possibly via intraperitoneal port" or take "immediately following drug x") should be populated in dosage.text.

Control0..*
BindingFor example codes, see SNOMEDCTAdditionalDosageInstructions
(example to http://hl7.org/fhir/ValueSet/additional-instruction-codes|5.0.0)

A coded concept identifying additional instructions such as "take with water" or "avoid operating heavy machinery".

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Additional instruction is intended to be coded, but where no code exists, the element could include text. For example, "Swallow with plenty of water" which might or might not be coded.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
174. MedicationRequest.dosageInstruction.patientInstruction
Definition

Instructions in terms that are understood by the patient or consumer.

ShortPatient or consumer oriented instructions
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
176. MedicationRequest.dosageInstruction.timing
Definition

SHOULD BE USED:

  • frequency should be used with period and periodUntil
  • frequency should be used with timeOfDay SHOULD NOT BE USED:
  • 'when' should not be used with 'timeOfDay'
  • event should not be used with bounds[x]
  • bounds[x] should not be used with count
  • event should not be used with period and Frequency
  • event should not be used with timeOfDay and DayOfWeek
  • period should not be used if timeOfDay + Exact Times (Count)
  • period should not be used if when + countMax
  • period should not be used with boundsRange
  • 'dayOfWeek' and 'periodUnit' should not be used together
  • dayOfWeek and timeOfDay should not be used with count
  • dayOfWeek should not be used with boundsRange
  • frequency should not be used with count alone unless there is a cycle
ShortSchedule: frequency and duration
Comments

This attribute might not always be populated while the Dosage.text is expected to be populated. If both are populated, then the Dosage.text should reflect the content of the Dosage.timing.

Control1..1
TypeTiming
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

The timing schedule for giving the medication to the patient. This data type allows many different expressions. For example: "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013". Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
178. MedicationRequest.dosageInstruction.timing.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
180. MedicationRequest.dosageInstruction.timing.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationRequest.dosageInstruction.timing.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
182. MedicationRequest.dosageInstruction.timing.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
184. MedicationRequest.dosageInstruction.timing.event
Definition

Identifies specific times when the event occurs.

ShortWhen the event occurs
Control0..*
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

In a Medication Administration Record, for instance, you need to take a general specification, and turn it into a precise specification.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
186. MedicationRequest.dosageInstruction.timing.repeat
Definition

A set of rules that describe when the event is scheduled.

ShortWhen the event is to occur
Control0..1
TypeElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Many timing schedules are determined by regular repetitions.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
tim-1: if there's a duration, there needs to be duration units (duration.empty() or durationUnit.exists())
tim-2: if there's a period, there needs to be period units (period.empty() or periodUnit.exists())
tim-4: duration SHALL be a non-negative value (duration.exists() implies duration >= 0)
tim-5: period SHALL be a non-negative value (period.exists() implies period >= 0)
tim-6: If there's a periodMax, there must be a period (periodMax.empty() or period.exists())
tim-7: If there's a durationMax, there must be a duration (durationMax.empty() or duration.exists())
tim-8: If there's a countMax, there must be a count (countMax.empty() or count.exists())
tim-9: If there's an offset, there must be a when (and not C, CM, CD, CV) (offset.empty() or (when.exists() and when.select($this in ('C' | 'CM' | 'CD' | 'CV')).allFalse()))
tim-10: If there's a timeOfDay, there cannot be a when, or vice versa (timeOfDay.empty() or when.empty())
188. MedicationRequest.dosageInstruction.timing.repeat.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
190. MedicationRequest.dosageInstruction.timing.repeat.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationRequest.dosageInstruction.timing.repeat.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
192. MedicationRequest.dosageInstruction.timing.repeat.bounds[x]
Definition

Either a duration for the length of the timing schedule, a range of possible length, or outer bounds for start and/or end limits of the timing schedule.

ShortLength/Range of lengths, or (Start and/or end) limits
Control0..1
TypeChoice of: Duration, Range, Period
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
194. MedicationRequest.dosageInstruction.timing.repeat.count
Definition

A total count of the desired number of repetitions across the duration of the entire timing specification. If countMax is present, this element indicates the lower bound of the allowed range of count values.

ShortNumber of times to repeat
Comments

If you have both bounds and count, then this should be understood as within the bounds period, until count times happens.

Control0..1
This element is affected by the following invariants: tim-8
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Repetitions may be limited by end time or total occurrences.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
196. MedicationRequest.dosageInstruction.timing.repeat.countMax
Definition

If present, indicates that the count is a range - so to perform the action between [count] and [countMax] times.

ShortMaximum number of times to repeat
Control0..1
This element is affected by the following invariants: tim-8
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
198. MedicationRequest.dosageInstruction.timing.repeat.duration
Definition

How long this thing happens for when it happens. If durationMax is present, this element indicates the lower bound of the allowed range of the duration.

ShortHow long when it happens
Comments

For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise).

Control0..1
This element is affected by the following invariants: tim-7, tim-1, tim-4
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Some activities are not instantaneous and need to be maintained for a period of time.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
200. MedicationRequest.dosageInstruction.timing.repeat.durationMax
Definition

If present, indicates that the duration is a range - so to perform the action between [duration] and [durationMax] time length.

ShortHow long when it happens (Max)
Comments

For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise).

Control0..1
This element is affected by the following invariants: tim-7
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Some activities are not instantaneous and need to be maintained for a period of time.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
202. MedicationRequest.dosageInstruction.timing.repeat.durationUnit
Definition

The units of time for the duration, in UCUM units Normal practice is to use the 'mo' code as a calendar month when calculating the next occurrence.

Shorts | min | h | d | wk | mo | a - unit of time (UCUM)
Control0..1
This element is affected by the following invariants: tim-1
BindingThe codes SHALL be taken from UnitsOfTime
(required to http://hl7.org/fhir/ValueSet/units-of-time|5.0.0)

A unit of time (units from UCUM).

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
204. MedicationRequest.dosageInstruction.timing.repeat.frequency
Definition

The number of times to repeat the action within the specified period. If frequencyMax is present, this element indicates the lower bound of the allowed range of the frequency.

ShortIndicates the number of repetitions that should occur within a period. I.e. Event occurs frequency times per period
Control0..1
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Meaning if MissingIf no frequency is stated, the assumption is that the event occurs once per period, but systems SHOULD always be specific about this
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
206. MedicationRequest.dosageInstruction.timing.repeat.frequencyMax
Definition

If present, indicates that the frequency is a range - so to repeat between [frequency] and [frequencyMax] times within the period or period range.

ShortEvent occurs up to frequencyMax times per period
Control0..1
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
208. MedicationRequest.dosageInstruction.timing.repeat.period
Definition

Indicates the duration of time over which repetitions are to occur; e.g. to express "3 times per day", 3 would be the frequency and "1 day" would be the period. If periodMax is present, this element indicates the lower bound of the allowed range of the period length.

ShortThe duration to which the frequency applies. I.e. Event occurs frequency times per period
Control0..1
This element is affected by the following invariants: tim-6, tim-5, tim-2
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
210. MedicationRequest.dosageInstruction.timing.repeat.periodMax
Definition

If present, indicates that the period is a range from [period] to [periodMax], allowing expressing concepts such as "do this once every 3-5 days.

ShortUpper limit of period (3-4 hours)
Control0..1
This element is affected by the following invariants: tim-6
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
212. MedicationRequest.dosageInstruction.timing.repeat.periodUnit
Definition

The units of time for the period in UCUM units Normal practice is to use the 'mo' code as a calendar month when calculating the next occurrence.

Shorts | min | h | d | wk | mo | a - unit of time (UCUM)
Control0..1
This element is affected by the following invariants: tim-2
BindingThe codes SHALL be taken from UnitsOfTime
(required to http://hl7.org/fhir/ValueSet/units-of-time|5.0.0)

A unit of time (units from UCUM).

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
214. MedicationRequest.dosageInstruction.timing.repeat.dayOfWeek
Definition

If one or more days of week is provided, then the action happens only on the specified day(s).

Shortmon | tue | wed | thu | fri | sat | sun
Comments

If no days are specified, the action is assumed to happen every day as otherwise specified.

Control0..*
BindingThe codes SHALL be taken from DaysOfWeekVS (0.13.0)
(required to https://terminology.dhp.uz/fhir/core/ValueSet/days-of-week-vs|0.13.0)
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
216. MedicationRequest.dosageInstruction.timing.repeat.timeOfDay
Definition

Specified time of day for action to take place.

ShortTime of day for action
Comments

When time of day is specified, it is inferred that the action happens every day (as filtered by dayofWeek) on the specified times. If there's a timeOfDay, there cannot be a when, or vice versa.

Control0..*
This element is affected by the following invariants: tim-10
Typetime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
218. MedicationRequest.dosageInstruction.timing.repeat.when
Definition

An approximate time period during the day, potentially linked to an event of daily living that indicates when the action should occur.

ShortCode for time period of occurrence
Comments

When more than one event is listed, the event is tied to the union of the specified events.

Control0..*
This element is affected by the following invariants: tim-9, tim-10
BindingThe codes SHALL be taken from EventTimingVS (0.13.0)
(required to https://terminology.dhp.uz/fhir/core/ValueSet/event-timing-vs|0.13.0)
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Timings are frequently determined by occurrences such as waking, eating and sleep.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
220. MedicationRequest.dosageInstruction.timing.repeat.offset
Definition

The number of minutes from the event. If the event code does not indicate whether the minutes is before or after the event, then the offset is assumed to be after the event.

ShortMinutes from event (before or after)
Control0..1
This element is affected by the following invariants: tim-9
TypeunsignedInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
222. MedicationRequest.dosageInstruction.timing.code
Definition

A code for the timing schedule (or just text in code.text). Some codes such as BID are ubiquitous, but many institutions define their own additional codes. If a code is provided, the code is understood to be a complete statement of whatever is specified in the structured timing data, and either the code or the data may be used to interpret the Timing, with the exception that .repeat.bounds still applies over the code (and is not contained in the code).

ShortC | BID | TID | QID | AM | PM | QD | QOD | +
Comments

BID etc. are defined as 'at institutionally specified times'. For example, an institution may choose that BID is "always at 7am and 6pm". If it is inappropriate for this choice to be made, the code BID should not be used. Instead, a distinct organization-specific code should be used in place of the HL7-defined BID code and/or a structured representation should be used (in this case, specifying the two event times).

Control0..1
BindingThe codes SHOULD be taken from TimingAbbreviationVS (0.13.0)
(preferred to https://terminology.dhp.uz/fhir/core/ValueSet/timing-abbreviation-vs|0.13.0)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
224. MedicationRequest.dosageInstruction.asNeeded
Definition

Indicates whether the Medication is only taken when needed within a specific dosing schedule (Boolean option).

ShortTake "as needed"
Comments

Can express "as needed" without a reason by setting the Boolean = True. In this case the CodeableConcept is not populated.

Control0..1
This element is affected by the following invariants: dos-1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
226. MedicationRequest.dosageInstruction.asNeededFor
Definition

Indicates whether the Medication is only taken based on a precondition for taking the Medication (CodeableConcept).

ShortTake "as needed" (for x)
Comments

Can express "as needed" with a reason by including the CodeableConcept. In this case the Boolean is assumed to be False, then the dose is given according to the schedule and is not "prn" or "as needed".

Control0..*
This element is affected by the following invariants: dos-1
BindingFor example codes, see SNOMEDCTMedicationAsNeededReasonCodes
(example to http://hl7.org/fhir/ValueSet/medication-as-needed-reason|5.0.0)

A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
228. MedicationRequest.dosageInstruction.site
Definition

Body site to administer to.

ShortBody site to administer to
Comments

If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension http://hl7.org/fhir/StructureDefinition/bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

Control0..1
BindingFor example codes, see SNOMEDCTAnatomicalStructureAdministrationSites
(example to http://hl7.org/fhir/ValueSet/approach-site-codes|5.0.0)

A coded concept describing the site location the medicine enters into or onto the body.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

A coded specification of the anatomic site where the medication first enters the body.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
230. MedicationRequest.dosageInstruction.route
Definition

How drug should enter body.

ShortRoute of medication administration
Control0..1
BindingUnless not suitable, these codes SHALL be taken from RouteCodeVS (0.13.0)
(extensible to https://terminology.dhp.uz/fhir/core/ValueSet/route-code-vs|0.13.0)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
232. MedicationRequest.dosageInstruction.method
Definition

Technique for administering medication.

ShortTechnique for administering medication
Comments

Terminologies used often pre-coordinate this term with the route and or form of administration.

Control0..1
BindingFor example codes, see SNOMEDCTAdministrationMethodCodes
(example to http://hl7.org/fhir/ValueSet/administration-method-codes|5.0.0)

A coded concept describing the technique by which the medicine is administered.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

A coded value indicating the method by which the medication is introduced into or onto the body. Most commonly used for injections. For examples, Slow Push; Deep IV.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
234. MedicationRequest.dosageInstruction.doseAndRate
Definition

Depending on the resource,this is the amount of medication administered, to be administered or typical amount to be administered.

ShortSingle dose
Control1..*
TypeElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
236. MedicationRequest.dosageInstruction.doseAndRate.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
238. MedicationRequest.dosageInstruction.doseAndRate.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationRequest.dosageInstruction.doseAndRate.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
240. MedicationRequest.dosageInstruction.doseAndRate.type
Definition

The kind of dose or rate specified, for example, ordered or calculated.

ShortThe kind of dose or rate specified
Control0..1
BindingFor example codes, see DoseAndRateType (2.0.0)
(example to http://terminology.hl7.org/ValueSet/dose-rate-type|2.0.0)

The kind of dose or rate specified.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

If the type is not populated, assume to be "ordered".

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
242. MedicationRequest.dosageInstruction.doseAndRate.dose[x]
Definition

Amount of medication per dose.

ShortAmount of medication per dose
Comments

Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours.

Control0..1
TypeChoice of: Range, Quantity(SimpleQuantity The snapshot does not say whether the constraints on the root of this type profile have been applied to this element, so assume they have not. Check the type profile directly as well)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summarytrue
Requirements

The amount of therapeutic or other substance given at one administration event.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MedicationRequest.dosageInstruction.doseAndRate.dose[x]. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
244. MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity
Slice NamedoseQuantity
Definition

Amount of medication per dose.

ShortAmount of medication per dose
Comments

Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours.

Control0..1
TypeQuantity(SimpleQuantity)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

The amount of therapeutic or other substance given at one administration event.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
246. MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
248. MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationRequest.dosageInstruction.doseAndRate.dose[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
250. MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity.value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control0..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
252. MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity.comparator
Definition

Not allowed to be used in this context

Short< | <= | >= | > | ad - how to understand the value
Control0..0
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
254. MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity.unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
256. MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity.system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control0..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
258. MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity.code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control0..1
This element is affected by the following invariants: qty-3
BindingUnless not suitable, these codes SHALL be taken from UCUMUnitsSupplementVS (0.13.0)
(extensible to https://terminology.dhp.uz/fhir/core/ValueSet/ucum-units-supp-vs|0.13.0)
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
260. MedicationRequest.dosageInstruction.doseAndRate.rate[x]
Definition

Amount of medication per unit of time.

ShortAmount of medication per unit of time
Comments

It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate.

It is possible to specify a rate over time (for example, 100 ml/hour) using either the rateRatio and rateQuantity. The rateQuantity approach requires systems to have the capability to parse UCUM grammar where ml/hour is included rather than a specific ratio where the time is specified as the denominator. Where a rate such as 500ml over 2 hours is specified, the use of rateRatio may be more semantically correct than specifying using a rateQuantity of 250 mg/hour.

Control0..1
TypeChoice of: Ratio, Range, Quantity(SimpleQuantity The snapshot does not say whether the constraints on the root of this type profile have been applied to this element, so assume they have not. Check the type profile directly as well)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summarytrue
Requirements

Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
262. MedicationRequest.dosageInstruction.maxDosePerPeriod
Definition

Upper limit on medication per unit of time.

ShortUpper limit on medication per unit of time
Comments

This is intended for use as an adjunct to the dosage when there is an upper cap. For example "2 tablets every 4 hours to a maximum of 8/day".

Control0..*
TypeRatio
Is Modifierfalse
Summarytrue
Requirements

The maximum total quantity of a therapeutic substance that may be administered to a subject over the period of time. For example, 1000mg in 24 hours.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
264. MedicationRequest.dosageInstruction.maxDosePerAdministration
Definition

Upper limit on medication per administration.

ShortUpper limit on medication per administration
Comments

This is intended for use as an adjunct to the dosage when there is an upper cap. For example, a body surface area related dose with a maximum amount, such as 1.5 mg/m2 (maximum 2 mg) IV over 5 – 10 minutes would have doseQuantity of 1.5 mg/m2 and maxDosePerAdministration of 2 mg.

Control0..1
TypeQuantity(SimpleQuantity)
Is Modifierfalse
Summarytrue
Requirements

The maximum total quantity of a therapeutic substance that may be administered to a subject per administration.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
266. MedicationRequest.dosageInstruction.maxDosePerLifetime
Definition

Upper limit on medication per lifetime of the patient.

ShortUpper limit on medication per lifetime of the patient
Control0..1
TypeQuantity(SimpleQuantity)
Is Modifierfalse
Summarytrue
Requirements

The maximum total quantity of a therapeutic substance that may be administered per lifetime of the subject.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
268. MedicationRequest.dispenseRequest
Definition

Indicates the specific details for the dispense or medication supply part of a medication request (also known as a Medication Prescription or Medication Order). Note that this information is not always sent with the order. There may be in some settings (e.g. hospitals) institutional or system support for completing the dispense details in the pharmacy department.

ShortMedication supply authorization
Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
270. MedicationRequest.dispenseRequest.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
272. MedicationRequest.dispenseRequest.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
274. MedicationRequest.dispenseRequest.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
276. MedicationRequest.dispenseRequest.initialFill
Definition

Indicates the quantity or duration for the first dispense of the medication.

ShortFirst fill details
Comments

If populating this element, either the quantity or the duration must be included.

Control0..1
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
278. MedicationRequest.dispenseRequest.initialFill.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
280. MedicationRequest.dispenseRequest.initialFill.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
282. MedicationRequest.dispenseRequest.initialFill.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
284. MedicationRequest.dispenseRequest.initialFill.quantity
Definition

The amount or quantity to provide as part of the first dispense.

ShortFirst fill quantity
Control0..1
TypeQuantity(SimpleQuantity)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
286. MedicationRequest.dispenseRequest.initialFill.duration
Definition

The length of time that the first dispense is expected to last.

ShortFirst fill duration
Control0..1
TypeDuration
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
288. MedicationRequest.dispenseRequest.dispenseInterval
Definition

The minimum period of time that must occur between dispenses of the medication.

ShortMinimum period of time between dispenses
Control0..1
TypeDuration
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
290. MedicationRequest.dispenseRequest.validityPeriod
Definition

This indicates the validity period of a prescription (stale dating the Prescription).

ShortTerm of the prescription: preliminary in draft, set equal to ClaimResponse.preAuthPeriod once the reservation is approved
Comments

It reflects the prescribers' perspective for the validity of the prescription. Dispenses must not be made against the prescription outside of this period. The lower-bound of the Dispensing Window signifies the earliest date that the prescription can be filled for the first time. If an upper-bound is not specified then the Prescription is open-ended or will default to a stale-date based on regulations.

Control1..1
TypePeriod
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Indicates when the Prescription becomes valid, and when it ceases to be a dispensable Prescription.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
292. MedicationRequest.dispenseRequest.validityPeriod.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
294. MedicationRequest.dispenseRequest.validityPeriod.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationRequest.dispenseRequest.validityPeriod.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
296. MedicationRequest.dispenseRequest.validityPeriod.start
Definition

The start of the period. The boundary is inclusive.

ShortPrescription issue date
Comments

If the low element is missing, the meaning is that the low boundary is not known.

Control0..1
This element is affected by the following invariants: per-1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
298. MedicationRequest.dispenseRequest.validityPeriod.end
Definition

The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

ShortPrescription expiration date
Comments

The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

Control0..1
This element is affected by the following invariants: per-1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
300. MedicationRequest.dispenseRequest.numberOfRepeatsAllowed
Definition

An integer indicating the number of times, in addition to the original dispense, (aka refills or repeats) that the patient can receive the prescribed medication. Usage Notes: This integer does not include the original order dispense. This means that if an order indicates dispense 30 tablets plus "3 repeats", then the order can be dispensed a total of 4 times and the patient can receive a total of 120 tablets. A prescriber may explicitly say that zero refills are permitted after the initial dispense.

ShortNumber of refills authorized
Comments

If displaying "number of authorized fills", add 1 to this number.

Control0..1
TypeunsignedInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
302. MedicationRequest.dispenseRequest.quantity
Definition

The amount that is to be dispensed for one fill.

ShortAmount of medication to supply per dispense
Control1..1
TypeQuantity(SimpleQuantity)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
304. MedicationRequest.dispenseRequest.expectedSupplyDuration
Definition

Identifies the period time over which the supplied product is expected to be used, or the length of time the dispense is expected to last.

ShortNumber of days supply per dispense
Comments

In some situations, this attribute may be used instead of quantity to identify the amount supplied by how long it is expected to last, rather than the physical quantity issued, e.g. 90 days supply of medication (based on an ordered dosage). When possible, it is always better to specify quantity, as this tends to be more precise. expectedSupplyDuration will always be an estimate that can be influenced by external factors.

Control0..1
TypeDuration
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
306. MedicationRequest.dispenseRequest.dispenser
Definition

Indicates the intended performing Organization that will dispense the medication as specified by the prescriber.

ShortPharmacy where this prescription can be dispensed
Control0..1
TypeReference(UZ Core Organization)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
308. MedicationRequest.dispenseRequest.dispenserInstruction
Definition

Provides additional information to the dispenser, for example, counselling to be provided to the patient.

ShortAdditional information for the dispenser
Control0..*
TypeAnnotation
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
310. MedicationRequest.dispenseRequest.doseAdministrationAid
Definition

Provides information about the type of adherence packaging to be supplied for the medication dispense.

ShortType of adherence packaging to use for the dispense
Control0..1
BindingFor example codes, see MedicationDoseAids
(example to http://hl7.org/fhir/ValueSet/medication-dose-aid|5.0.0)
TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
312. MedicationRequest.substitution
Definition

Indicates whether or not substitution can or should be part of the dispense. In some cases, substitution must happen, in other cases substitution must not happen. This block explains the prescriber's intent. If nothing is specified substitution may be done.

ShortAny restrictions on medication substitution
Control0..1
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
314. MedicationRequest.substitution.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
316. MedicationRequest.substitution.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
318. MedicationRequest.substitution.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
320. MedicationRequest.substitution.allowed[x]
Definition

True if the prescriber allows a different drug to be dispensed from what was prescribed.

ShortWhether substitution is allowed or not
Comments

This element is labeled as a modifier because whether substitution is allow or not, it cannot be ignored.

Control1..1
BindingThe codes SHOULD be taken from ActSubstanceAdminSubstitutionCode (3.0.0)
(preferred to http://terminology.hl7.org/ValueSet/v3-ActSubstanceAdminSubstitutionCode|3.0.0)

Identifies the type of substitution allowed.

TypeChoice of: boolean, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
322. MedicationRequest.substitution.reason
Definition

Indicates the reason for the substitution, or why substitution must or must not be performed.

ShortWhy should (not) substitution be made
Control0..1
BindingFor example codes, see SubstanceAdminSubstitutionReason (3.0.0)
(example to http://terminology.hl7.org/ValueSet/v3-SubstanceAdminSubstitutionReason|3.0.0)

SubstanceAdminSubstitutionReason

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
324. MedicationRequest.eventHistory
Definition

Links to Provenance records for past versions of this resource or fulfilling request or event resources that identify key state transitions or updates that are likely to be relevant to a user looking at the current version of the resource.

ShortA list of events of interest in the lifecycle
Comments

This might not include provenances for all versions of the request – only those deemed "relevant" or important. This SHALL NOT include the provenance associated with this current version of the resource. (If that provenance is deemed to be a "relevant" change, it will need to be added as part of a later update. Until then, it can be queried directly as the provenance that points to this version using _revinclude All Provenances should have some historical version of this Request as their subject.).

Control0..*
TypeReference(Provenance)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))