Uzbekistan State Health Insurance Fund Core
0.9.0 - ci-build Uzbekistan flag

Uzbekistan State Health Insurance Fund Core - Local Development build (v0.9.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: SHIF Program Budget Summary Report - Detailed Descriptions

Draft as of 2026-11-20

Definitions for the shif-program-budget-summary-report resource profile

See the documentation on how to interpret the contents of this table

0. MeasureReport
Definition

The MeasureReport resource contains the results of the calculation of a measure; and optionally a reference to the resources involved in that calculation.

ShortResults of a measure evaluation
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
mrp-1: Measure Reports used for data collection SHALL NOT communicate group and score information ((type != 'data-exchange') or group.exists().not())
mrp-2: Stratifiers SHALL be either a single criteria or a set of criteria components (group.stratifier.stratum.all(value.exists() xor component.exists()))
shif-budget-summary-measure: The report is for the measure shif-program-budget-summary. (measure = 'https://ig.shif.uz/core/Measure/shif-program-budget-summary' or measure.startsWith('https://ig.shif.uz/core/Measure/shif-program-budget-summary|'))
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
mrp-1: Measure Reports used for data collection SHALL NOT communicate group and score information ((type != 'data-exchange') or group.exists().not())
mrp-2: Stratifiers SHALL be either a single criteria or a set of criteria components (group.stratifier.stratum.all(value.exists() xor component.exists()))
2. MeasureReport.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. MeasureReport.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. MeasureReport.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control10..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
8. MeasureReport.extension:program
Slice Nameprogram
Definition

Program of the State Health Insurance Fund. On a report, the program the report is for: one report covers one program, and the program is data, so the profiles and measures are shared by all programs. On a referral or a prescription, the program the request is issued under: the medical data carry the program, the information system sets it before the request is submitted to the Fund, and the Fund checks at intake that it equals Claim.subType of the claim based on the request.

ShortSHIF Program
Control1..1
TypeExtension(SHIF Program) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. MeasureReport.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. MeasureReport.status
Definition

The MeasureReport status. No data will be available until the MeasureReport status is complete.

ShortA snapshot is complete when published and never changescomplete | pending | error
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from MeasureReportStatushttp://hl7.org/fhir/ValueSet/measure-report-status|5.0.0
(required to http://hl7.org/fhir/ValueSet/measure-report-status|5.0.0)

The status of the measure report (e.g. complete, pending, or error)

Typecode
Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Pattern Value
{
  "status" : "complete"
}
<status value="complete"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. MeasureReport.type
Definition

The type of measure report. This may be an individual report, which provides the score for the measure for an individual member of the population; a subject-listing, which returns the list of members that meet the various criteria in the measure; a summary report, which returns a population count for each of the criteria in the measure; or a data-collection, which enables the MeasureReport to be used to exchange the data-of-interest for a quality measure.

Shortindividual | subject-list | summary | data-exchange
Comments

Data-exchange reports are used only to communicate data-of-interest for a measure. They do not necessarily include all the data for a particular subject or population, but they may.

Control1..1
This element is affected by the following invariants: mrp-1
BindingThe codes SHALL be taken from MeasureReportTypehttp://hl7.org/fhir/ValueSet/measure-report-type|5.0.0
(required to http://hl7.org/fhir/ValueSet/measure-report-type|5.0.0)

The type of the measure report: individual, patient listing, or summary

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Pattern Value
{
  "type" : "summary"
}
<type value="summary"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. MeasureReport.dataUpdateType
Definition

Indicates whether the data submitted in a data-exchange report represents a snapshot or incremental update. A snapshot update replaces all previously submitted data for the receiver, whereas an incremental update represents only updated and/or changed data and should be applied as a differential update to the existing submitted data for the receiver.

Shortincremental | snapshot
Comments

This element only applies to Data-collection reports used to communicate the data-of-interest for a measure

Control0..1
BindingThe codes SHALL be taken from SubmitDataUpdateTypehttp://hl7.org/fhir/ValueSet/submit-data-update-type|5.0.0
(required to http://hl7.org/fhir/ValueSet/submit-data-update-type|5.0.0)
Typecode
Is Modifiertrue because This element determines whether the data in a data-exchange measure report is a snapshot or incremental update and is required in order to correctly apply the data update to a receiving system
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

Allows receiving systems to support incremental exchange of data, reducing overall bandwidth requirements.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. MeasureReport.measure
Definition

A reference to the Measure that was calculated to produce this report.

Shorthttps://ig.shif.uz/core/Measure/shif-program-budget-summaryWhat measure was calculated
Control10..1
Typecanonical(Measure)
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. MeasureReport.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..01
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. MeasureReport.date
Definition

The date this measure was calculated.

ShortMoment of the snapshot: 00:20 Tashkent time (UTC+5) of the snapshot dateWhen the measure was calculated
Control10..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. MeasureReport.period
Definition

The reporting period for which the report was calculated.

ShortFiscal year of the program budgetWhat period the report covers
Control1..1
TypePeriod
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. MeasureReport.scoring
Definition

Indicates how the calculation is performed for the measure, including proportion, ratio, continuous-variable, and cohort. The value set is extensible, allowing additional measure scoring types to be represented. It is expected to be the same as the scoring element on the referenced Measure.

ShortWhat scoring method (e.g. proportion, ratio, continuous-variable)
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasureScoring (2.0.0)http://terminology.hl7.org/ValueSet/measure-scoring
(extensible to http://terminology.hl7.org/ValueSet/measure-scoring|2.0.0)
TypeCodeableConcept
Is Modifiertrue because Scoring determines what method was used to calculate the measure score and is required for correct interpretation of the score
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. MeasureReport.improvementNotation
Definition

Whether improvement in the measure is noted by an increase or decrease in the measure score.

Shortincrease | decrease
Comments

This element is typically defined by the measure, but reproduced here to ensure the measure score can be interpreted. The element is labeled as a modifier because it changes the interpretation of the reported measure score. Note also that a MeasureReport instance includes the improvementNotation as defined by the Measure being reported. It is duplicated in the MeasureReport because it is a critical aspect of interpreting the measure score but it is not intended to reflect whether the measure report is an increase or decrease. It helps interpret if the measure score is an increase or decrease, I.e., moving in the direction of the desired outcome.

Control0..1
BindingThe codes SHALL be taken from MeasureImprovementNotationhttp://hl7.org/fhir/ValueSet/measure-improvement-notation|5.0.0
(required to http://hl7.org/fhir/ValueSet/measure-improvement-notation|5.0.0)

The improvement notation of the measure report (e.g. increase or decrease)

TypeCodeableConcept
Is Modifiertrue because Improvement notation determines how to interpret the measure score (i.e. whether an increase is an improvement)
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. MeasureReport.group
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control60..*
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MeasureReport.group. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

32. MeasureReport.group.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
34. MeasureReport.group.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control10..1
BindingFor example codes, see MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. MeasureReport.group.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..01
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. MeasureReport.group.population
Definition

The populations that make up the population group, one for each type of population appropriate for the measure.

ShortThe populations in the group
Control0..0*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
41. MeasureReport.group:availableShared
Slice NameavailableShared
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control10..1*
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
shif-budget-strata-with-amount: A group without an amount has no strata. (measureScore.exists() or stratifier.stratum.empty())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
43. MeasureReport.group:availableShared.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
45. MeasureReport.group:availableShared.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "available-shared"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="available-shared"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
47. MeasureReport.group:availableShared.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Control0..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
49. MeasureReport.group:availableShared.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
51. MeasureReport.group:availableShared.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
53. MeasureReport.group:availableShared.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
55. MeasureReport.group:availableShared.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
57. MeasureReport.group:availableShared.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control10..1*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
59. MeasureReport.group:availableShared.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
61. MeasureReport.group:availableShared.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Pattern Value
{
  "linkId" : "icd10-chapter-age-group"
}
<linkId value="icd10-chapter-age-group"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
63. MeasureReport.group:availableShared.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..01
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
65. MeasureReport.group:availableShared.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortThe amounts of the strata add up to the amount of the group; no strata when the group has no amountStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
67. MeasureReport.group:availableShared.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
69. MeasureReport.group:availableShared.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..01
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExamplehttp://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
71. MeasureReport.group:availableShared.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control20..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.component. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code
73. MeasureReport.group:availableShared.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
75. MeasureReport.group:availableShared.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
77. MeasureReport.group:availableShared.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExamplehttp://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
79. MeasureReport.group:availableShared.stratifier.stratum.component:icd10Chapter
Slice Nameicd10Chapter
Definition

A stratifier component value.

ShortStratifier component values
Control10..1*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
81. MeasureReport.group:availableShared.stratifier.stratum.component:icd10Chapter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
83. MeasureReport.group:availableShared.stratifier.stratum.component:icd10Chapter.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "icd10-chapter"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="icd10-chapter"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
85. MeasureReport.group:availableShared.stratifier.stratum.component:icd10Chapter.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from For example codes, see ICD10ChapterVS (0.9.0)http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(required to https://ig.shif.uz/core/ValueSet/icd10-chapter-vs|0.9.0)
TypeCodeableConcept, boolean, Reference, Quantity, Range
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
87. MeasureReport.group:availableShared.stratifier.stratum.component:ageGroup
Slice NameageGroup
Definition

A stratifier component value.

ShortStratifier component values
Control10..1*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
89. MeasureReport.group:availableShared.stratifier.stratum.component:ageGroup.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
91. MeasureReport.group:availableShared.stratifier.stratum.component:ageGroup.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "age-group"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="age-group"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
93. MeasureReport.group:availableShared.stratifier.stratum.component:ageGroup.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from For example codes, see AgeGroupFinancingBinary (1.0.0)http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(required to https://terminology.shif.uz/fhir/core/ValueSet/age-group-financing-binary-vs|1.0.0)
TypeCodeableConcept, boolean, Reference, Quantity, Range
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
95. MeasureReport.group:availableShared.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..0*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
98. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control10..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
108. MeasureReport.group:availableOwnBudget
Slice NameavailableOwnBudget
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control10..1*
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
110. MeasureReport.group:availableOwnBudget.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
112. MeasureReport.group:availableOwnBudget.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "available-own-budget"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="available-own-budget"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
114. MeasureReport.group:availableOwnBudget.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Control0..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
116. MeasureReport.group:availableOwnBudget.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
118. MeasureReport.group:availableOwnBudget.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
120. MeasureReport.group:availableOwnBudget.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
122. MeasureReport.group:availableOwnBudget.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
124. MeasureReport.group:availableOwnBudget.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control0..0*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
127. MeasureReport.group:reserved
Slice Namereserved
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control10..1*
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
shif-budget-strata-with-amount: A group without an amount has no strata. (measureScore.exists() or stratifier.stratum.empty())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
129. MeasureReport.group:reserved.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
131. MeasureReport.group:reserved.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
133. MeasureReport.group:reserved.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Control0..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
135. MeasureReport.group:reserved.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
137. MeasureReport.group:reserved.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
139. MeasureReport.group:reserved.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
141. MeasureReport.group:reserved.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
143. MeasureReport.group:reserved.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control10..1*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
145. MeasureReport.group:reserved.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
147. MeasureReport.group:reserved.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Pattern Value
{
  "linkId" : "icd10-chapter-age-group"
}
<linkId value="icd10-chapter-age-group"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
149. MeasureReport.group:reserved.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..01
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
151. MeasureReport.group:reserved.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortThe amounts of the strata add up to the amount of the group; no strata when the group has no amountStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
153. MeasureReport.group:reserved.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
155. MeasureReport.group:reserved.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..01
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExamplehttp://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
157. MeasureReport.group:reserved.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control20..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.component. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code
159. MeasureReport.group:reserved.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
161. MeasureReport.group:reserved.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
163. MeasureReport.group:reserved.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExamplehttp://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
165. MeasureReport.group:reserved.stratifier.stratum.component:icd10Chapter
Slice Nameicd10Chapter
Definition

A stratifier component value.

ShortStratifier component values
Control10..1*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
167. MeasureReport.group:reserved.stratifier.stratum.component:icd10Chapter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
169. MeasureReport.group:reserved.stratifier.stratum.component:icd10Chapter.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "icd10-chapter"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="icd10-chapter"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
171. MeasureReport.group:reserved.stratifier.stratum.component:icd10Chapter.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from For example codes, see ICD10ChapterVS (0.9.0)http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(required to https://ig.shif.uz/core/ValueSet/icd10-chapter-vs|0.9.0)
TypeCodeableConcept, boolean, Reference, Quantity, Range
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
173. MeasureReport.group:reserved.stratifier.stratum.component:ageGroup
Slice NameageGroup
Definition

A stratifier component value.

ShortStratifier component values
Control10..1*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
175. MeasureReport.group:reserved.stratifier.stratum.component:ageGroup.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
177. MeasureReport.group:reserved.stratifier.stratum.component:ageGroup.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "age-group"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="age-group"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
179. MeasureReport.group:reserved.stratifier.stratum.component:ageGroup.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from For example codes, see AgeGroupFinancingBinary (1.0.0)http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(required to https://terminology.shif.uz/fhir/core/ValueSet/age-group-financing-binary-vs|1.0.0)
TypeCodeableConcept, boolean, Reference, Quantity, Range
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
181. MeasureReport.group:reserved.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..0*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
184. MeasureReport.group:reserved.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control10..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
186. MeasureReport.group:reserved.stratifier.stratum.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
188. MeasureReport.group:reserved.stratifier.stratum.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
190. MeasureReport.group:reserved.stratifier.stratum.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
192. MeasureReport.group:reserved.stratifier.stratum.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
194. MeasureReport.group:reservedBudgetOverride
Slice NamereservedBudgetOverride
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control10..1*
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
shif-budget-strata-with-amount: A group without an amount has no strata. (measureScore.exists() or stratifier.stratum.empty())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
196. MeasureReport.group:reservedBudgetOverride.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
198. MeasureReport.group:reservedBudgetOverride.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved-budget-override"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved-budget-override"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
200. MeasureReport.group:reservedBudgetOverride.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Control0..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
202. MeasureReport.group:reservedBudgetOverride.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
204. MeasureReport.group:reservedBudgetOverride.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
206. MeasureReport.group:reservedBudgetOverride.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
208. MeasureReport.group:reservedBudgetOverride.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
210. MeasureReport.group:reservedBudgetOverride.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control10..1*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
212. MeasureReport.group:reservedBudgetOverride.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
214. MeasureReport.group:reservedBudgetOverride.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Pattern Value
{
  "linkId" : "icd10-chapter-age-group"
}
<linkId value="icd10-chapter-age-group"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
216. MeasureReport.group:reservedBudgetOverride.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..01
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
218. MeasureReport.group:reservedBudgetOverride.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortThe amounts of the strata add up to the amount of the group; no strata when the group has no amountStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
220. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
222. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..01
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExamplehttp://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
224. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control20..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.component. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code
226. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
228. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
230. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExamplehttp://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
232. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:icd10Chapter
Slice Nameicd10Chapter
Definition

A stratifier component value.

ShortStratifier component values
Control10..1*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
234. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:icd10Chapter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
236. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:icd10Chapter.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "icd10-chapter"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="icd10-chapter"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
238. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:icd10Chapter.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from For example codes, see ICD10ChapterVS (0.9.0)http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(required to https://ig.shif.uz/core/ValueSet/icd10-chapter-vs|0.9.0)
TypeCodeableConcept, boolean, Reference, Quantity, Range
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
240. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:ageGroup
Slice NameageGroup
Definition

A stratifier component value.

ShortStratifier component values
Control10..1*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
242. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:ageGroup.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
244. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:ageGroup.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "age-group"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="age-group"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
246. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:ageGroup.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from For example codes, see AgeGroupFinancingBinary (1.0.0)http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(required to https://terminology.shif.uz/fhir/core/ValueSet/age-group-financing-binary-vs|1.0.0)
TypeCodeableConcept, boolean, Reference, Quantity, Range
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
248. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..0*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
251. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control10..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
253. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
255. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
257. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
259. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
261. MeasureReport.group:claimed
Slice Nameclaimed
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control10..1*
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
shif-budget-strata-with-amount: A group without an amount has no strata. (measureScore.exists() or stratifier.stratum.empty())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
263. MeasureReport.group:claimed.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
265. MeasureReport.group:claimed.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "claimed"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="claimed"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
267. MeasureReport.group:claimed.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Control0..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
269. MeasureReport.group:claimed.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
271. MeasureReport.group:claimed.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
273. MeasureReport.group:claimed.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
275. MeasureReport.group:claimed.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
277. MeasureReport.group:claimed.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control10..1*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
279. MeasureReport.group:claimed.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
281. MeasureReport.group:claimed.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Pattern Value
{
  "linkId" : "icd10-chapter-age-group"
}
<linkId value="icd10-chapter-age-group"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
283. MeasureReport.group:claimed.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..01
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
285. MeasureReport.group:claimed.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortThe amounts of the strata add up to the amount of the group; no strata when the group has no amountStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
287. MeasureReport.group:claimed.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
289. MeasureReport.group:claimed.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..01
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExamplehttp://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
291. MeasureReport.group:claimed.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control20..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.component. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code
293. MeasureReport.group:claimed.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
295. MeasureReport.group:claimed.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
297. MeasureReport.group:claimed.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExamplehttp://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
299. MeasureReport.group:claimed.stratifier.stratum.component:icd10Chapter
Slice Nameicd10Chapter
Definition

A stratifier component value.

ShortStratifier component values
Control10..1*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
301. MeasureReport.group:claimed.stratifier.stratum.component:icd10Chapter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
303. MeasureReport.group:claimed.stratifier.stratum.component:icd10Chapter.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "icd10-chapter"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="icd10-chapter"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
305. MeasureReport.group:claimed.stratifier.stratum.component:icd10Chapter.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from For example codes, see ICD10ChapterVS (0.9.0)http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(required to https://ig.shif.uz/core/ValueSet/icd10-chapter-vs|0.9.0)
TypeCodeableConcept, boolean, Reference, Quantity, Range
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
307. MeasureReport.group:claimed.stratifier.stratum.component:ageGroup
Slice NameageGroup
Definition

A stratifier component value.

ShortStratifier component values
Control10..1*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
309. MeasureReport.group:claimed.stratifier.stratum.component:ageGroup.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
311. MeasureReport.group:claimed.stratifier.stratum.component:ageGroup.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "age-group"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="age-group"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
313. MeasureReport.group:claimed.stratifier.stratum.component:ageGroup.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from For example codes, see AgeGroupFinancingBinary (1.0.0)http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(required to https://terminology.shif.uz/fhir/core/ValueSet/age-group-financing-binary-vs|1.0.0)
TypeCodeableConcept, boolean, Reference, Quantity, Range
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
315. MeasureReport.group:claimed.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..0*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
318. MeasureReport.group:claimed.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control10..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
320. MeasureReport.group:claimed.stratifier.stratum.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
322. MeasureReport.group:claimed.stratifier.stratum.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
324. MeasureReport.group:claimed.stratifier.stratum.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
326. MeasureReport.group:claimed.stratifier.stratum.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
328. MeasureReport.group:payable
Slice Namepayable
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control10..1*
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
shif-budget-strata-with-amount: A group without an amount has no strata. (measureScore.exists() or stratifier.stratum.empty())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
330. MeasureReport.group:payable.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
332. MeasureReport.group:payable.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "payable"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="payable"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
334. MeasureReport.group:payable.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Control0..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
336. MeasureReport.group:payable.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
338. MeasureReport.group:payable.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
340. MeasureReport.group:payable.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
342. MeasureReport.group:payable.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
344. MeasureReport.group:payable.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control10..1*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
346. MeasureReport.group:payable.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
348. MeasureReport.group:payable.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Pattern Value
{
  "linkId" : "icd10-chapter-age-group"
}
<linkId value="icd10-chapter-age-group"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
350. MeasureReport.group:payable.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..01
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
352. MeasureReport.group:payable.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortThe amounts of the strata add up to the amount of the group; no strata when the group has no amountStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
354. MeasureReport.group:payable.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
356. MeasureReport.group:payable.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..01
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExamplehttp://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
358. MeasureReport.group:payable.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control20..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.component. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code
360. MeasureReport.group:payable.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
362. MeasureReport.group:payable.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
364. MeasureReport.group:payable.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExamplehttp://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
366. MeasureReport.group:payable.stratifier.stratum.component:icd10Chapter
Slice Nameicd10Chapter
Definition

A stratifier component value.

ShortStratifier component values
Control10..1*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
368. MeasureReport.group:payable.stratifier.stratum.component:icd10Chapter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
370. MeasureReport.group:payable.stratifier.stratum.component:icd10Chapter.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "icd10-chapter"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="icd10-chapter"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
372. MeasureReport.group:payable.stratifier.stratum.component:icd10Chapter.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from For example codes, see ICD10ChapterVS (0.9.0)http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(required to https://ig.shif.uz/core/ValueSet/icd10-chapter-vs|0.9.0)
TypeCodeableConcept, boolean, Reference, Quantity, Range
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
374. MeasureReport.group:payable.stratifier.stratum.component:ageGroup
Slice NameageGroup
Definition

A stratifier component value.

ShortStratifier component values
Control10..1*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
376. MeasureReport.group:payable.stratifier.stratum.component:ageGroup.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
378. MeasureReport.group:payable.stratifier.stratum.component:ageGroup.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExamplehttp://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "age-group"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="age-group"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
380. MeasureReport.group:payable.stratifier.stratum.component:ageGroup.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from For example codes, see AgeGroupFinancingBinary (1.0.0)http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0
(required to https://terminology.shif.uz/fhir/core/ValueSet/age-group-financing-binary-vs|1.0.0)
TypeCodeableConcept, boolean, Reference, Quantity, Range
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
382. MeasureReport.group:payable.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..0*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
385. MeasureReport.group:payable.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control10..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
387. MeasureReport.group:payable.stratifier.stratum.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
389. MeasureReport.group:payable.stratifier.stratum.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
391. MeasureReport.group:payable.stratifier.stratum.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
393. MeasureReport.group:payable.stratifier.stratum.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

See the documentation on how to interpret the contents of this table

0. MeasureReport
Invariantsshif-budget-summary-measure: The report is for the measure shif-program-budget-summary. (measure = 'https://ig.shif.uz/core/Measure/shif-program-budget-summary' or measure.startsWith('https://ig.shif.uz/core/Measure/shif-program-budget-summary|'))
2. MeasureReport.extension
Control1..?
SlicingThis element introduces a set of slices on MeasureReport.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
4. MeasureReport.extension:program
Slice Nameprogram
Control1..1
TypeExtension(SHIF Program) (Extension Type: CodeableConcept)
Must Supporttrue
6. MeasureReport.status
ShortA snapshot is complete when published and never changes
Pattern Value
{
  "status" : "complete"
}
<status value="complete"/>
8. MeasureReport.type
Pattern Value
{
  "type" : "summary"
}
<type value="summary"/>
10. MeasureReport.measure
Shorthttps://ig.shif.uz/core/Measure/shif-program-budget-summary
Control1..?
Must Supporttrue
12. MeasureReport.subject
Control0..0
14. MeasureReport.date
ShortMoment of the snapshot: 00:20 Tashkent time (UTC+5) of the snapshot date
Control1..?
Must Supporttrue
16. MeasureReport.period
ShortFiscal year of the program budget
Must Supporttrue
18. MeasureReport.group
Control6..?
Must Supporttrue
SlicingThis element introduces a set of slices on MeasureReport.group. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

20. MeasureReport.group.code
Control1..?
22. MeasureReport.group.subject
Control0..0
24. MeasureReport.group.population
Control0..0
26. MeasureReport.group:availableShared
Slice NameavailableShared
Control1..1
Must Supporttrue
Invariantsshif-budget-strata-with-amount: A group without an amount has no strata. (measureScore.exists() or stratifier.stratum.empty())
28. MeasureReport.group:availableShared.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "available-shared"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="available-shared"/>
  </coding>
</code>
30. MeasureReport.group:availableShared.measureScore[x]
ShortAmount in UZS; absent when the program or the organization does not have this state
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
32. MeasureReport.group:availableShared.measureScore[x].value
Control1..?
34. MeasureReport.group:availableShared.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
36. MeasureReport.group:availableShared.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
38. MeasureReport.group:availableShared.stratifier
Control1..1
Must Supporttrue
40. MeasureReport.group:availableShared.stratifier.linkId
Control1..?
Pattern Value
{
  "linkId" : "icd10-chapter-age-group"
}
<linkId value="icd10-chapter-age-group"/>
42. MeasureReport.group:availableShared.stratifier.code
Control0..0
44. MeasureReport.group:availableShared.stratifier.stratum
ShortThe amounts of the strata add up to the amount of the group; no strata when the group has no amount
Must Supporttrue
46. MeasureReport.group:availableShared.stratifier.stratum.value[x]
Control0..0
48. MeasureReport.group:availableShared.stratifier.stratum.component
Control2..?
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.component. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code
50. MeasureReport.group:availableShared.stratifier.stratum.component:icd10Chapter
Slice Nameicd10Chapter
Control1..1
Must Supporttrue
52. MeasureReport.group:availableShared.stratifier.stratum.component:icd10Chapter.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "icd10-chapter"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="icd10-chapter"/>
  </coding>
</code>
54. MeasureReport.group:availableShared.stratifier.stratum.component:icd10Chapter.value[x]
BindingThe codes SHALL be taken from ICD10ChapterVS (0.9.0)
(required to https://ig.shif.uz/core/ValueSet/icd10-chapter-vs|0.9.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
56. MeasureReport.group:availableShared.stratifier.stratum.component:ageGroup
Slice NameageGroup
Control1..1
Must Supporttrue
58. MeasureReport.group:availableShared.stratifier.stratum.component:ageGroup.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "age-group"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="age-group"/>
  </coding>
</code>
60. MeasureReport.group:availableShared.stratifier.stratum.component:ageGroup.value[x]
BindingThe codes SHALL be taken from AgeGroupFinancingBinary (1.0.0)
(required to https://terminology.shif.uz/fhir/core/ValueSet/age-group-financing-binary-vs|1.0.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
62. MeasureReport.group:availableShared.stratifier.stratum.population
Control0..0
64. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x]
Control1..?
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
66. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x].value
Control1..?
68. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
70. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
72. MeasureReport.group:availableOwnBudget
Slice NameavailableOwnBudget
Control1..1
Must Supporttrue
74. MeasureReport.group:availableOwnBudget.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "available-own-budget"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="available-own-budget"/>
  </coding>
</code>
76. MeasureReport.group:availableOwnBudget.measureScore[x]
ShortAmount in UZS; absent when the program or the organization does not have this state
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
78. MeasureReport.group:availableOwnBudget.measureScore[x].value
Control1..?
80. MeasureReport.group:availableOwnBudget.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
82. MeasureReport.group:availableOwnBudget.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
84. MeasureReport.group:availableOwnBudget.stratifier
Control0..0
86. MeasureReport.group:reserved
Slice Namereserved
Control1..1
Must Supporttrue
Invariantsshif-budget-strata-with-amount: A group without an amount has no strata. (measureScore.exists() or stratifier.stratum.empty())
88. MeasureReport.group:reserved.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved"/>
  </coding>
</code>
90. MeasureReport.group:reserved.measureScore[x]
ShortAmount in UZS; absent when the program or the organization does not have this state
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
92. MeasureReport.group:reserved.measureScore[x].value
Control1..?
94. MeasureReport.group:reserved.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
96. MeasureReport.group:reserved.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
98. MeasureReport.group:reserved.stratifier
Control1..1
Must Supporttrue
100. MeasureReport.group:reserved.stratifier.linkId
Control1..?
Pattern Value
{
  "linkId" : "icd10-chapter-age-group"
}
<linkId value="icd10-chapter-age-group"/>
102. MeasureReport.group:reserved.stratifier.code
Control0..0
104. MeasureReport.group:reserved.stratifier.stratum
ShortThe amounts of the strata add up to the amount of the group; no strata when the group has no amount
Must Supporttrue
106. MeasureReport.group:reserved.stratifier.stratum.value[x]
Control0..0
108. MeasureReport.group:reserved.stratifier.stratum.component
Control2..?
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.component. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code
110. MeasureReport.group:reserved.stratifier.stratum.component:icd10Chapter
Slice Nameicd10Chapter
Control1..1
Must Supporttrue
112. MeasureReport.group:reserved.stratifier.stratum.component:icd10Chapter.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "icd10-chapter"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="icd10-chapter"/>
  </coding>
</code>
114. MeasureReport.group:reserved.stratifier.stratum.component:icd10Chapter.value[x]
BindingThe codes SHALL be taken from ICD10ChapterVS (0.9.0)
(required to https://ig.shif.uz/core/ValueSet/icd10-chapter-vs|0.9.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
116. MeasureReport.group:reserved.stratifier.stratum.component:ageGroup
Slice NameageGroup
Control1..1
Must Supporttrue
118. MeasureReport.group:reserved.stratifier.stratum.component:ageGroup.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "age-group"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="age-group"/>
  </coding>
</code>
120. MeasureReport.group:reserved.stratifier.stratum.component:ageGroup.value[x]
BindingThe codes SHALL be taken from AgeGroupFinancingBinary (1.0.0)
(required to https://terminology.shif.uz/fhir/core/ValueSet/age-group-financing-binary-vs|1.0.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
122. MeasureReport.group:reserved.stratifier.stratum.population
Control0..0
124. MeasureReport.group:reserved.stratifier.stratum.measureScore[x]
Control1..?
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
126. MeasureReport.group:reserved.stratifier.stratum.measureScore[x].value
Control1..?
128. MeasureReport.group:reserved.stratifier.stratum.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
130. MeasureReport.group:reserved.stratifier.stratum.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
132. MeasureReport.group:reservedBudgetOverride
Slice NamereservedBudgetOverride
Control1..1
Must Supporttrue
Invariantsshif-budget-strata-with-amount: A group without an amount has no strata. (measureScore.exists() or stratifier.stratum.empty())
134. MeasureReport.group:reservedBudgetOverride.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved-budget-override"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved-budget-override"/>
  </coding>
</code>
136. MeasureReport.group:reservedBudgetOverride.measureScore[x]
ShortAmount in UZS; absent when the program or the organization does not have this state
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
138. MeasureReport.group:reservedBudgetOverride.measureScore[x].value
Control1..?
140. MeasureReport.group:reservedBudgetOverride.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
142. MeasureReport.group:reservedBudgetOverride.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
144. MeasureReport.group:reservedBudgetOverride.stratifier
Control1..1
Must Supporttrue
146. MeasureReport.group:reservedBudgetOverride.stratifier.linkId
Control1..?
Pattern Value
{
  "linkId" : "icd10-chapter-age-group"
}
<linkId value="icd10-chapter-age-group"/>
148. MeasureReport.group:reservedBudgetOverride.stratifier.code
Control0..0
150. MeasureReport.group:reservedBudgetOverride.stratifier.stratum
ShortThe amounts of the strata add up to the amount of the group; no strata when the group has no amount
Must Supporttrue
152. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.value[x]
Control0..0
154. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component
Control2..?
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.component. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code
156. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:icd10Chapter
Slice Nameicd10Chapter
Control1..1
Must Supporttrue
158. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:icd10Chapter.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "icd10-chapter"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="icd10-chapter"/>
  </coding>
</code>
160. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:icd10Chapter.value[x]
BindingThe codes SHALL be taken from ICD10ChapterVS (0.9.0)
(required to https://ig.shif.uz/core/ValueSet/icd10-chapter-vs|0.9.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
162. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:ageGroup
Slice NameageGroup
Control1..1
Must Supporttrue
164. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:ageGroup.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "age-group"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="age-group"/>
  </coding>
</code>
166. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:ageGroup.value[x]
BindingThe codes SHALL be taken from AgeGroupFinancingBinary (1.0.0)
(required to https://terminology.shif.uz/fhir/core/ValueSet/age-group-financing-binary-vs|1.0.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
168. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population
Control0..0
170. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x]
Control1..?
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
172. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x].value
Control1..?
174. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
176. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
178. MeasureReport.group:claimed
Slice Nameclaimed
Control1..1
Must Supporttrue
Invariantsshif-budget-strata-with-amount: A group without an amount has no strata. (measureScore.exists() or stratifier.stratum.empty())
180. MeasureReport.group:claimed.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "claimed"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="claimed"/>
  </coding>
</code>
182. MeasureReport.group:claimed.measureScore[x]
ShortAmount in UZS; absent when the program or the organization does not have this state
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
184. MeasureReport.group:claimed.measureScore[x].value
Control1..?
186. MeasureReport.group:claimed.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
188. MeasureReport.group:claimed.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
190. MeasureReport.group:claimed.stratifier
Control1..1
Must Supporttrue
192. MeasureReport.group:claimed.stratifier.linkId
Control1..?
Pattern Value
{
  "linkId" : "icd10-chapter-age-group"
}
<linkId value="icd10-chapter-age-group"/>
194. MeasureReport.group:claimed.stratifier.code
Control0..0
196. MeasureReport.group:claimed.stratifier.stratum
ShortThe amounts of the strata add up to the amount of the group; no strata when the group has no amount
Must Supporttrue
198. MeasureReport.group:claimed.stratifier.stratum.value[x]
Control0..0
200. MeasureReport.group:claimed.stratifier.stratum.component
Control2..?
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.component. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code
202. MeasureReport.group:claimed.stratifier.stratum.component:icd10Chapter
Slice Nameicd10Chapter
Control1..1
Must Supporttrue
204. MeasureReport.group:claimed.stratifier.stratum.component:icd10Chapter.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "icd10-chapter"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="icd10-chapter"/>
  </coding>
</code>
206. MeasureReport.group:claimed.stratifier.stratum.component:icd10Chapter.value[x]
BindingThe codes SHALL be taken from ICD10ChapterVS (0.9.0)
(required to https://ig.shif.uz/core/ValueSet/icd10-chapter-vs|0.9.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
208. MeasureReport.group:claimed.stratifier.stratum.component:ageGroup
Slice NameageGroup
Control1..1
Must Supporttrue
210. MeasureReport.group:claimed.stratifier.stratum.component:ageGroup.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "age-group"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="age-group"/>
  </coding>
</code>
212. MeasureReport.group:claimed.stratifier.stratum.component:ageGroup.value[x]
BindingThe codes SHALL be taken from AgeGroupFinancingBinary (1.0.0)
(required to https://terminology.shif.uz/fhir/core/ValueSet/age-group-financing-binary-vs|1.0.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
214. MeasureReport.group:claimed.stratifier.stratum.population
Control0..0
216. MeasureReport.group:claimed.stratifier.stratum.measureScore[x]
Control1..?
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
218. MeasureReport.group:claimed.stratifier.stratum.measureScore[x].value
Control1..?
220. MeasureReport.group:claimed.stratifier.stratum.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
222. MeasureReport.group:claimed.stratifier.stratum.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
224. MeasureReport.group:payable
Slice Namepayable
Control1..1
Must Supporttrue
Invariantsshif-budget-strata-with-amount: A group without an amount has no strata. (measureScore.exists() or stratifier.stratum.empty())
226. MeasureReport.group:payable.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "payable"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="payable"/>
  </coding>
</code>
228. MeasureReport.group:payable.measureScore[x]
ShortAmount in UZS; absent when the program or the organization does not have this state
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
230. MeasureReport.group:payable.measureScore[x].value
Control1..?
232. MeasureReport.group:payable.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
234. MeasureReport.group:payable.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
236. MeasureReport.group:payable.stratifier
Control1..1
Must Supporttrue
238. MeasureReport.group:payable.stratifier.linkId
Control1..?
Pattern Value
{
  "linkId" : "icd10-chapter-age-group"
}
<linkId value="icd10-chapter-age-group"/>
240. MeasureReport.group:payable.stratifier.code
Control0..0
242. MeasureReport.group:payable.stratifier.stratum
ShortThe amounts of the strata add up to the amount of the group; no strata when the group has no amount
Must Supporttrue
244. MeasureReport.group:payable.stratifier.stratum.value[x]
Control0..0
246. MeasureReport.group:payable.stratifier.stratum.component
Control2..?
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.component. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code
248. MeasureReport.group:payable.stratifier.stratum.component:icd10Chapter
Slice Nameicd10Chapter
Control1..1
Must Supporttrue
250. MeasureReport.group:payable.stratifier.stratum.component:icd10Chapter.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "icd10-chapter"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="icd10-chapter"/>
  </coding>
</code>
252. MeasureReport.group:payable.stratifier.stratum.component:icd10Chapter.value[x]
BindingThe codes SHALL be taken from ICD10ChapterVS (0.9.0)
(required to https://ig.shif.uz/core/ValueSet/icd10-chapter-vs|0.9.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
254. MeasureReport.group:payable.stratifier.stratum.component:ageGroup
Slice NameageGroup
Control1..1
Must Supporttrue
256. MeasureReport.group:payable.stratifier.stratum.component:ageGroup.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "age-group"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="age-group"/>
  </coding>
</code>
258. MeasureReport.group:payable.stratifier.stratum.component:ageGroup.value[x]
BindingThe codes SHALL be taken from AgeGroupFinancingBinary (1.0.0)
(required to https://terminology.shif.uz/fhir/core/ValueSet/age-group-financing-binary-vs|1.0.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
260. MeasureReport.group:payable.stratifier.stratum.population
Control0..0
262. MeasureReport.group:payable.stratifier.stratum.measureScore[x]
Control1..?
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
264. MeasureReport.group:payable.stratifier.stratum.measureScore[x].value
Control1..?
266. MeasureReport.group:payable.stratifier.stratum.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
268. MeasureReport.group:payable.stratifier.stratum.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>

See the documentation on how to interpret the contents of this table

0. MeasureReport
Definition

The MeasureReport resource contains the results of the calculation of a measure; and optionally a reference to the resources involved in that calculation.

ShortResults of a measure evaluation
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
mrp-1: Measure Reports used for data collection SHALL NOT communicate group and score information ((type != 'data-exchange') or group.exists().not())
mrp-2: Stratifiers SHALL be either a single criteria or a set of criteria components (group.stratifier.stratum.all(value.exists() xor component.exists()))
shif-budget-summary-measure: The report is for the measure shif-program-budget-summary. (measure = 'https://ig.shif.uz/core/Measure/shif-program-budget-summary' or measure.startsWith('https://ig.shif.uz/core/Measure/shif-program-budget-summary|'))
2. MeasureReport.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

Control0..1
Typeid
Is Modifierfalse
Must Supportfalse
Summarytrue
4. MeasureReport.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. MeasureReport.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. MeasureReport.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHALL be taken from AllLanguages
(required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

IETF language tag for a human language

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. MeasureReport.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
This element is affected by the following invariants: dom-6
TypeNarrative
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. MeasureReport.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. MeasureReport.extension
Definition

An Extension

ShortExtension
Control1..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
16. MeasureReport.extension:program
Slice Nameprogram
Definition

Program of the State Health Insurance Fund. On a report, the program the report is for: one report covers one program, and the program is data, so the profiles and measures are shared by all programs. On a referral or a prescription, the program the request is issued under: the medical data carry the program, the information system sets it before the request is submitted to the Fund, and the Fund checks at intake that it equals Claim.subType of the claim based on the request.

ShortSHIF Program
Control1..1
TypeExtension(SHIF Program) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. MeasureReport.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. MeasureReport.identifier
Definition

A formal identifier that is used to identify this MeasureReport when it is represented in other formats or referenced in a specification, model, design or an instance.

ShortAdditional identifier for the MeasureReport
Comments

Typically, this is used for identifiers that can go in an HL7 V3 II data type - e.g. to identify this {{title}} outside of FHIR, where the logical URL is not possible to use.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Allows externally provided and/or usable business identifiers to be easily associated with the module.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. MeasureReport.status
Definition

The MeasureReport status. No data will be available until the MeasureReport status is complete.

ShortA snapshot is complete when published and never changes
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from MeasureReportStatus
(required to http://hl7.org/fhir/ValueSet/measure-report-status|5.0.0)

The status of the measure report (e.g. complete, pending, or error)

Typecode
Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Pattern Value
{
  "status" : "complete"
}
<status value="complete"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. MeasureReport.type
Definition

The type of measure report. This may be an individual report, which provides the score for the measure for an individual member of the population; a subject-listing, which returns the list of members that meet the various criteria in the measure; a summary report, which returns a population count for each of the criteria in the measure; or a data-collection, which enables the MeasureReport to be used to exchange the data-of-interest for a quality measure.

Shortindividual | subject-list | summary | data-exchange
Comments

Data-exchange reports are used only to communicate data-of-interest for a measure. They do not necessarily include all the data for a particular subject or population, but they may.

Control1..1
This element is affected by the following invariants: mrp-1
BindingThe codes SHALL be taken from MeasureReportType
(required to http://hl7.org/fhir/ValueSet/measure-report-type|5.0.0)

The type of the measure report: individual, patient listing, or summary

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Pattern Value
{
  "type" : "summary"
}
<type value="summary"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. MeasureReport.dataUpdateType
Definition

Indicates whether the data submitted in a data-exchange report represents a snapshot or incremental update. A snapshot update replaces all previously submitted data for the receiver, whereas an incremental update represents only updated and/or changed data and should be applied as a differential update to the existing submitted data for the receiver.

Shortincremental | snapshot
Comments

This element only applies to Data-collection reports used to communicate the data-of-interest for a measure

Control0..1
BindingThe codes SHALL be taken from SubmitDataUpdateType
(required to http://hl7.org/fhir/ValueSet/submit-data-update-type|5.0.0)
Typecode
Is Modifiertrue because This element determines whether the data in a data-exchange measure report is a snapshot or incremental update and is required in order to correctly apply the data update to a receiving system
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

Allows receiving systems to support incremental exchange of data, reducing overall bandwidth requirements.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. MeasureReport.measure
Definition

A reference to the Measure that was calculated to produce this report.

Shorthttps://ig.shif.uz/core/Measure/shif-program-budget-summary
Control1..1
Typecanonical(Measure)
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. MeasureReport.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..0
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. MeasureReport.date
Definition

The date this measure was calculated.

ShortMoment of the snapshot: 00:20 Tashkent time (UTC+5) of the snapshot date
Control1..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. MeasureReport.reporter
Definition

The individual or organization that is reporting the data.

ShortWho is reporting the data
Control0..1
TypeReference(Practitioner, PractitionerRole, Organization, Group)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. MeasureReport.reportingVendor
Definition

A reference to the vendor who queried the data, calculated results and/or generated the report. The ‘reporting vendor’ is intended to represent the submitting entity when it is not the same as the reporting entity. This extension is used when the Receiver is interested in getting vendor information in the report.

ShortWhat vendor prepared the data
Control0..1
TypeReference(Organization)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. MeasureReport.location
Definition

A reference to the location for which the data is being reported.

ShortWhere the reported data is from
Control0..1
TypeReference(Location)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. MeasureReport.period
Definition

The reporting period for which the report was calculated.

ShortFiscal year of the program budget
Control1..1
TypePeriod
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. MeasureReport.inputParameters
Definition

A reference to a Parameters resource (typically represented using a contained resource) that represents any input parameters that were provided to the operation that generated the report.

ShortWhat parameters were provided to the report
Comments

Whenever an operation returns a MeasureReport, the IN parameters from that operation can be returned to the caller of the operation using MeasureReport.inputParameters. Operations include but are not limited to $evaluate-measure, $care-gaps, $data-requirements, and $collect-data. The inputParameters can also be used in a MeasureReport used to define a test case (i.e., not as a result of an operation).

Control0..1
TypeReference(Parameters)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. MeasureReport.scoring
Definition

Indicates how the calculation is performed for the measure, including proportion, ratio, continuous-variable, and cohort. The value set is extensible, allowing additional measure scoring types to be represented. It is expected to be the same as the scoring element on the referenced Measure.

ShortWhat scoring method (e.g. proportion, ratio, continuous-variable)
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasureScoring (2.0.0)
(extensible to http://terminology.hl7.org/ValueSet/measure-scoring|2.0.0)
TypeCodeableConcept
Is Modifiertrue because Scoring determines what method was used to calculate the measure score and is required for correct interpretation of the score
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. MeasureReport.improvementNotation
Definition

Whether improvement in the measure is noted by an increase or decrease in the measure score.

Shortincrease | decrease
Comments

This element is typically defined by the measure, but reproduced here to ensure the measure score can be interpreted. The element is labeled as a modifier because it changes the interpretation of the reported measure score. Note also that a MeasureReport instance includes the improvementNotation as defined by the Measure being reported. It is duplicated in the MeasureReport because it is a critical aspect of interpreting the measure score but it is not intended to reflect whether the measure report is an increase or decrease. It helps interpret if the measure score is an increase or decrease, I.e., moving in the direction of the desired outcome.

Control0..1
BindingThe codes SHALL be taken from MeasureImprovementNotation
(required to http://hl7.org/fhir/ValueSet/measure-improvement-notation|5.0.0)

The improvement notation of the measure report (e.g. increase or decrease)

TypeCodeableConcept
Is Modifiertrue because Improvement notation determines how to interpret the measure score (i.e. whether an increase is an improvement)
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. MeasureReport.group
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control6..*
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MeasureReport.group. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

50. MeasureReport.group.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
52. MeasureReport.group.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
54. MeasureReport.group.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
56. MeasureReport.group.linkId
Definition

The group from the Measure that corresponds to this group in the MeasureReport resource.

ShortPointer to specific group from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. MeasureReport.group.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control1..1
BindingFor example codes, see MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. MeasureReport.group.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..0
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. MeasureReport.group.population
Definition

The populations that make up the population group, one for each type of population appropriate for the measure.

ShortThe populations in the group
Control0..0
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
73. MeasureReport.group.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortWhat score this group achieved
Control0..1
TypeChoice of: Quantity, dateTime, CodeableConcept, Period, Range, Duration
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
75. MeasureReport.group.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
77. MeasureReport.group.stratifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
79. MeasureReport.group.stratifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
81. MeasureReport.group.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
83. MeasureReport.group.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
85. MeasureReport.group.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
87. MeasureReport.group.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
89. MeasureReport.group.stratifier.stratum.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
91. MeasureReport.group.stratifier.stratum.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
93. MeasureReport.group.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
95. MeasureReport.group.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..1
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
97. MeasureReport.group.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
99. MeasureReport.group.stratifier.stratum.component.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
101. MeasureReport.group.stratifier.stratum.component.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
103. MeasureReport.group.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
105. MeasureReport.group.stratifier.stratum.component.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
107. MeasureReport.group.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
109. MeasureReport.group.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
111. MeasureReport.group.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
113. MeasureReport.group.stratifier.stratum.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
115. MeasureReport.group.stratifier.stratum.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
117. MeasureReport.group.stratifier.stratum.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
119. MeasureReport.group.stratifier.stratum.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
121. MeasureReport.group.stratifier.stratum.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
123. MeasureReport.group.stratifier.stratum.population.count
Definition

The number of members of the population in this stratum.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
125. MeasureReport.group.stratifier.stratum.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population in this stratum.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
127. MeasureReport.group.stratifier.stratum.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
129. MeasureReport.group.stratifier.stratum.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
131. MeasureReport.group.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control0..1
TypeChoice of: Quantity, dateTime, CodeableConcept, Period, Range, Duration
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
133. MeasureReport.group:availableShared
Slice NameavailableShared
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control1..1
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
shif-budget-strata-with-amount: A group without an amount has no strata. (measureScore.exists() or stratifier.stratum.empty())
135. MeasureReport.group:availableShared.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
137. MeasureReport.group:availableShared.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
139. MeasureReport.group:availableShared.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
141. MeasureReport.group:availableShared.linkId
Definition

The group from the Measure that corresponds to this group in the MeasureReport resource.

ShortPointer to specific group from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
143. MeasureReport.group:availableShared.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "available-shared"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="available-shared"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
145. MeasureReport.group:availableShared.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..1
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
147. MeasureReport.group:availableShared.population
Definition

The populations that make up the population group, one for each type of population appropriate for the measure.

ShortThe populations in the group
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
149. MeasureReport.group:availableShared.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
151. MeasureReport.group:availableShared.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
153. MeasureReport.group:availableShared.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
155. MeasureReport.group:availableShared.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
157. MeasureReport.group:availableShared.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
159. MeasureReport.group:availableShared.population.count
Definition

The number of members of the population.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
161. MeasureReport.group:availableShared.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
163. MeasureReport.group:availableShared.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
165. MeasureReport.group:availableShared.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
167. MeasureReport.group:availableShared.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this state
Control0..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
169. MeasureReport.group:availableShared.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
171. MeasureReport.group:availableShared.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
173. MeasureReport.group:availableShared.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
175. MeasureReport.group:availableShared.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
177. MeasureReport.group:availableShared.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
179. MeasureReport.group:availableShared.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
181. MeasureReport.group:availableShared.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
183. MeasureReport.group:availableShared.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control1..1
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
185. MeasureReport.group:availableShared.stratifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
187. MeasureReport.group:availableShared.stratifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
189. MeasureReport.group:availableShared.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
191. MeasureReport.group:availableShared.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Pattern Value
{
  "linkId" : "icd10-chapter-age-group"
}
<linkId value="icd10-chapter-age-group"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
193. MeasureReport.group:availableShared.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..0
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
195. MeasureReport.group:availableShared.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortThe amounts of the strata add up to the amount of the group; no strata when the group has no amount
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
197. MeasureReport.group:availableShared.stratifier.stratum.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
199. MeasureReport.group:availableShared.stratifier.stratum.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
201. MeasureReport.group:availableShared.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
203. MeasureReport.group:availableShared.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..0
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
205. MeasureReport.group:availableShared.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control2..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.component. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code
207. MeasureReport.group:availableShared.stratifier.stratum.component.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
209. MeasureReport.group:availableShared.stratifier.stratum.component.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
211. MeasureReport.group:availableShared.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
213. MeasureReport.group:availableShared.stratifier.stratum.component.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
215. MeasureReport.group:availableShared.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
217. MeasureReport.group:availableShared.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
219. MeasureReport.group:availableShared.stratifier.stratum.component:icd10Chapter
Slice Nameicd10Chapter
Definition

A stratifier component value.

ShortStratifier component values
Control1..1
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
221. MeasureReport.group:availableShared.stratifier.stratum.component:icd10Chapter.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
223. MeasureReport.group:availableShared.stratifier.stratum.component:icd10Chapter.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
225. MeasureReport.group:availableShared.stratifier.stratum.component:icd10Chapter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
227. MeasureReport.group:availableShared.stratifier.stratum.component:icd10Chapter.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
229. MeasureReport.group:availableShared.stratifier.stratum.component:icd10Chapter.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "icd10-chapter"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="icd10-chapter"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
231. MeasureReport.group:availableShared.stratifier.stratum.component:icd10Chapter.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from ICD10ChapterVS (0.9.0)
(required to https://ig.shif.uz/core/ValueSet/icd10-chapter-vs|0.9.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
233. MeasureReport.group:availableShared.stratifier.stratum.component:ageGroup
Slice NameageGroup
Definition

A stratifier component value.

ShortStratifier component values
Control1..1
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
235. MeasureReport.group:availableShared.stratifier.stratum.component:ageGroup.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
237. MeasureReport.group:availableShared.stratifier.stratum.component:ageGroup.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
239. MeasureReport.group:availableShared.stratifier.stratum.component:ageGroup.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
241. MeasureReport.group:availableShared.stratifier.stratum.component:ageGroup.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
243. MeasureReport.group:availableShared.stratifier.stratum.component:ageGroup.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "age-group"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="age-group"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
245. MeasureReport.group:availableShared.stratifier.stratum.component:ageGroup.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from AgeGroupFinancingBinary (1.0.0)
(required to https://terminology.shif.uz/fhir/core/ValueSet/age-group-financing-binary-vs|1.0.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
247. MeasureReport.group:availableShared.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..0
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
258. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control1..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
260. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
262. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
264. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
266. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
268. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
270. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
272. MeasureReport.group:availableShared.stratifier.stratum.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
274. MeasureReport.group:availableOwnBudget
Slice NameavailableOwnBudget
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control1..1
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
276. MeasureReport.group:availableOwnBudget.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
278. MeasureReport.group:availableOwnBudget.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
280. MeasureReport.group:availableOwnBudget.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
282. MeasureReport.group:availableOwnBudget.linkId
Definition

The group from the Measure that corresponds to this group in the MeasureReport resource.

ShortPointer to specific group from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
284. MeasureReport.group:availableOwnBudget.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "available-own-budget"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="available-own-budget"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
286. MeasureReport.group:availableOwnBudget.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..1
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
288. MeasureReport.group:availableOwnBudget.population
Definition

The populations that make up the population group, one for each type of population appropriate for the measure.

ShortThe populations in the group
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
290. MeasureReport.group:availableOwnBudget.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
292. MeasureReport.group:availableOwnBudget.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
294. MeasureReport.group:availableOwnBudget.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
296. MeasureReport.group:availableOwnBudget.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
298. MeasureReport.group:availableOwnBudget.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
300. MeasureReport.group:availableOwnBudget.population.count
Definition

The number of members of the population.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
302. MeasureReport.group:availableOwnBudget.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
304. MeasureReport.group:availableOwnBudget.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
306. MeasureReport.group:availableOwnBudget.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
308. MeasureReport.group:availableOwnBudget.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this state
Control0..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
310. MeasureReport.group:availableOwnBudget.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
312. MeasureReport.group:availableOwnBudget.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
314. MeasureReport.group:availableOwnBudget.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
316. MeasureReport.group:availableOwnBudget.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
318. MeasureReport.group:availableOwnBudget.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
320. MeasureReport.group:availableOwnBudget.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
322. MeasureReport.group:availableOwnBudget.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
324. MeasureReport.group:availableOwnBudget.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control0..0
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
354. MeasureReport.group:reserved
Slice Namereserved
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control1..1
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
shif-budget-strata-with-amount: A group without an amount has no strata. (measureScore.exists() or stratifier.stratum.empty())
356. MeasureReport.group:reserved.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
358. MeasureReport.group:reserved.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
360. MeasureReport.group:reserved.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
362. MeasureReport.group:reserved.linkId
Definition

The group from the Measure that corresponds to this group in the MeasureReport resource.

ShortPointer to specific group from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
364. MeasureReport.group:reserved.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
366. MeasureReport.group:reserved.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..1
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
368. MeasureReport.group:reserved.population
Definition

The populations that make up the population group, one for each type of population appropriate for the measure.

ShortThe populations in the group
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
370. MeasureReport.group:reserved.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
372. MeasureReport.group:reserved.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
374. MeasureReport.group:reserved.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
376. MeasureReport.group:reserved.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
378. MeasureReport.group:reserved.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
380. MeasureReport.group:reserved.population.count
Definition

The number of members of the population.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
382. MeasureReport.group:reserved.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
384. MeasureReport.group:reserved.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
386. MeasureReport.group:reserved.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
388. MeasureReport.group:reserved.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this state
Control0..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
390. MeasureReport.group:reserved.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
392. MeasureReport.group:reserved.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
394. MeasureReport.group:reserved.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
396. MeasureReport.group:reserved.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
398. MeasureReport.group:reserved.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
400. MeasureReport.group:reserved.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
402. MeasureReport.group:reserved.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
404. MeasureReport.group:reserved.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control1..1
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
406. MeasureReport.group:reserved.stratifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
408. MeasureReport.group:reserved.stratifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
410. MeasureReport.group:reserved.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
412. MeasureReport.group:reserved.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Pattern Value
{
  "linkId" : "icd10-chapter-age-group"
}
<linkId value="icd10-chapter-age-group"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
414. MeasureReport.group:reserved.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..0
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
416. MeasureReport.group:reserved.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortThe amounts of the strata add up to the amount of the group; no strata when the group has no amount
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
418. MeasureReport.group:reserved.stratifier.stratum.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
420. MeasureReport.group:reserved.stratifier.stratum.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
422. MeasureReport.group:reserved.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
424. MeasureReport.group:reserved.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..0
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
426. MeasureReport.group:reserved.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control2..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.component. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code
428. MeasureReport.group:reserved.stratifier.stratum.component.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
430. MeasureReport.group:reserved.stratifier.stratum.component.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
432. MeasureReport.group:reserved.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
434. MeasureReport.group:reserved.stratifier.stratum.component.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
436. MeasureReport.group:reserved.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
438. MeasureReport.group:reserved.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
440. MeasureReport.group:reserved.stratifier.stratum.component:icd10Chapter
Slice Nameicd10Chapter
Definition

A stratifier component value.

ShortStratifier component values
Control1..1
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
442. MeasureReport.group:reserved.stratifier.stratum.component:icd10Chapter.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
444. MeasureReport.group:reserved.stratifier.stratum.component:icd10Chapter.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
446. MeasureReport.group:reserved.stratifier.stratum.component:icd10Chapter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
448. MeasureReport.group:reserved.stratifier.stratum.component:icd10Chapter.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
450. MeasureReport.group:reserved.stratifier.stratum.component:icd10Chapter.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "icd10-chapter"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="icd10-chapter"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
452. MeasureReport.group:reserved.stratifier.stratum.component:icd10Chapter.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from ICD10ChapterVS (0.9.0)
(required to https://ig.shif.uz/core/ValueSet/icd10-chapter-vs|0.9.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
454. MeasureReport.group:reserved.stratifier.stratum.component:ageGroup
Slice NameageGroup
Definition

A stratifier component value.

ShortStratifier component values
Control1..1
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
456. MeasureReport.group:reserved.stratifier.stratum.component:ageGroup.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
458. MeasureReport.group:reserved.stratifier.stratum.component:ageGroup.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
460. MeasureReport.group:reserved.stratifier.stratum.component:ageGroup.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
462. MeasureReport.group:reserved.stratifier.stratum.component:ageGroup.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
464. MeasureReport.group:reserved.stratifier.stratum.component:ageGroup.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "age-group"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="age-group"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
466. MeasureReport.group:reserved.stratifier.stratum.component:ageGroup.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from AgeGroupFinancingBinary (1.0.0)
(required to https://terminology.shif.uz/fhir/core/ValueSet/age-group-financing-binary-vs|1.0.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
468. MeasureReport.group:reserved.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..0
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
479. MeasureReport.group:reserved.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control1..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
481. MeasureReport.group:reserved.stratifier.stratum.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
483. MeasureReport.group:reserved.stratifier.stratum.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
485. MeasureReport.group:reserved.stratifier.stratum.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
487. MeasureReport.group:reserved.stratifier.stratum.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
489. MeasureReport.group:reserved.stratifier.stratum.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
491. MeasureReport.group:reserved.stratifier.stratum.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
493. MeasureReport.group:reserved.stratifier.stratum.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
495. MeasureReport.group:reservedBudgetOverride
Slice NamereservedBudgetOverride
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control1..1
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
shif-budget-strata-with-amount: A group without an amount has no strata. (measureScore.exists() or stratifier.stratum.empty())
497. MeasureReport.group:reservedBudgetOverride.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
499. MeasureReport.group:reservedBudgetOverride.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
501. MeasureReport.group:reservedBudgetOverride.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
503. MeasureReport.group:reservedBudgetOverride.linkId
Definition

The group from the Measure that corresponds to this group in the MeasureReport resource.

ShortPointer to specific group from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
505. MeasureReport.group:reservedBudgetOverride.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved-budget-override"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved-budget-override"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
507. MeasureReport.group:reservedBudgetOverride.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..1
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
509. MeasureReport.group:reservedBudgetOverride.population
Definition

The populations that make up the population group, one for each type of population appropriate for the measure.

ShortThe populations in the group
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
511. MeasureReport.group:reservedBudgetOverride.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
513. MeasureReport.group:reservedBudgetOverride.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
515. MeasureReport.group:reservedBudgetOverride.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
517. MeasureReport.group:reservedBudgetOverride.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
519. MeasureReport.group:reservedBudgetOverride.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
521. MeasureReport.group:reservedBudgetOverride.population.count
Definition

The number of members of the population.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
523. MeasureReport.group:reservedBudgetOverride.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
525. MeasureReport.group:reservedBudgetOverride.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
527. MeasureReport.group:reservedBudgetOverride.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
529. MeasureReport.group:reservedBudgetOverride.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this state
Control0..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
531. MeasureReport.group:reservedBudgetOverride.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
533. MeasureReport.group:reservedBudgetOverride.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
535. MeasureReport.group:reservedBudgetOverride.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
537. MeasureReport.group:reservedBudgetOverride.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
539. MeasureReport.group:reservedBudgetOverride.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
541. MeasureReport.group:reservedBudgetOverride.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
543. MeasureReport.group:reservedBudgetOverride.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
545. MeasureReport.group:reservedBudgetOverride.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control1..1
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
547. MeasureReport.group:reservedBudgetOverride.stratifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
549. MeasureReport.group:reservedBudgetOverride.stratifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
551. MeasureReport.group:reservedBudgetOverride.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
553. MeasureReport.group:reservedBudgetOverride.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Pattern Value
{
  "linkId" : "icd10-chapter-age-group"
}
<linkId value="icd10-chapter-age-group"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
555. MeasureReport.group:reservedBudgetOverride.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..0
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
557. MeasureReport.group:reservedBudgetOverride.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortThe amounts of the strata add up to the amount of the group; no strata when the group has no amount
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
559. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
561. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
563. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
565. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..0
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
567. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control2..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.component. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code
569. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
571. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
573. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
575. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
577. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
579. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
581. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:icd10Chapter
Slice Nameicd10Chapter
Definition

A stratifier component value.

ShortStratifier component values
Control1..1
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
583. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:icd10Chapter.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
585. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:icd10Chapter.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
587. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:icd10Chapter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
589. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:icd10Chapter.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
591. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:icd10Chapter.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "icd10-chapter"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="icd10-chapter"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
593. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:icd10Chapter.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from ICD10ChapterVS (0.9.0)
(required to https://ig.shif.uz/core/ValueSet/icd10-chapter-vs|0.9.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
595. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:ageGroup
Slice NameageGroup
Definition

A stratifier component value.

ShortStratifier component values
Control1..1
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
597. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:ageGroup.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
599. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:ageGroup.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
601. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:ageGroup.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
603. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:ageGroup.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
605. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:ageGroup.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "age-group"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="age-group"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
607. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component:ageGroup.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from AgeGroupFinancingBinary (1.0.0)
(required to https://terminology.shif.uz/fhir/core/ValueSet/age-group-financing-binary-vs|1.0.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
609. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..0
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
620. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control1..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
622. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
624. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
626. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
628. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
630. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
632. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
634. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
636. MeasureReport.group:claimed
Slice Nameclaimed
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control1..1
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
shif-budget-strata-with-amount: A group without an amount has no strata. (measureScore.exists() or stratifier.stratum.empty())
638. MeasureReport.group:claimed.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
640. MeasureReport.group:claimed.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
642. MeasureReport.group:claimed.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
644. MeasureReport.group:claimed.linkId
Definition

The group from the Measure that corresponds to this group in the MeasureReport resource.

ShortPointer to specific group from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
646. MeasureReport.group:claimed.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "claimed"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="claimed"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
648. MeasureReport.group:claimed.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..1
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
650. MeasureReport.group:claimed.population
Definition

The populations that make up the population group, one for each type of population appropriate for the measure.

ShortThe populations in the group
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
652. MeasureReport.group:claimed.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
654. MeasureReport.group:claimed.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
656. MeasureReport.group:claimed.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
658. MeasureReport.group:claimed.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
660. MeasureReport.group:claimed.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
662. MeasureReport.group:claimed.population.count
Definition

The number of members of the population.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
664. MeasureReport.group:claimed.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
666. MeasureReport.group:claimed.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
668. MeasureReport.group:claimed.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
670. MeasureReport.group:claimed.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this state
Control0..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
672. MeasureReport.group:claimed.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
674. MeasureReport.group:claimed.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
676. MeasureReport.group:claimed.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
678. MeasureReport.group:claimed.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
680. MeasureReport.group:claimed.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
682. MeasureReport.group:claimed.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
684. MeasureReport.group:claimed.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
686. MeasureReport.group:claimed.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control1..1
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
688. MeasureReport.group:claimed.stratifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
690. MeasureReport.group:claimed.stratifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
692. MeasureReport.group:claimed.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
694. MeasureReport.group:claimed.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Pattern Value
{
  "linkId" : "icd10-chapter-age-group"
}
<linkId value="icd10-chapter-age-group"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
696. MeasureReport.group:claimed.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..0
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
698. MeasureReport.group:claimed.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortThe amounts of the strata add up to the amount of the group; no strata when the group has no amount
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
700. MeasureReport.group:claimed.stratifier.stratum.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
702. MeasureReport.group:claimed.stratifier.stratum.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
704. MeasureReport.group:claimed.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
706. MeasureReport.group:claimed.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..0
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
708. MeasureReport.group:claimed.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control2..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.component. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code
710. MeasureReport.group:claimed.stratifier.stratum.component.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
712. MeasureReport.group:claimed.stratifier.stratum.component.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
714. MeasureReport.group:claimed.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
716. MeasureReport.group:claimed.stratifier.stratum.component.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
718. MeasureReport.group:claimed.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
720. MeasureReport.group:claimed.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
722. MeasureReport.group:claimed.stratifier.stratum.component:icd10Chapter
Slice Nameicd10Chapter
Definition

A stratifier component value.

ShortStratifier component values
Control1..1
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
724. MeasureReport.group:claimed.stratifier.stratum.component:icd10Chapter.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
726. MeasureReport.group:claimed.stratifier.stratum.component:icd10Chapter.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
728. MeasureReport.group:claimed.stratifier.stratum.component:icd10Chapter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
730. MeasureReport.group:claimed.stratifier.stratum.component:icd10Chapter.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
732. MeasureReport.group:claimed.stratifier.stratum.component:icd10Chapter.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "icd10-chapter"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="icd10-chapter"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
734. MeasureReport.group:claimed.stratifier.stratum.component:icd10Chapter.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from ICD10ChapterVS (0.9.0)
(required to https://ig.shif.uz/core/ValueSet/icd10-chapter-vs|0.9.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
736. MeasureReport.group:claimed.stratifier.stratum.component:ageGroup
Slice NameageGroup
Definition

A stratifier component value.

ShortStratifier component values
Control1..1
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
738. MeasureReport.group:claimed.stratifier.stratum.component:ageGroup.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
740. MeasureReport.group:claimed.stratifier.stratum.component:ageGroup.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
742. MeasureReport.group:claimed.stratifier.stratum.component:ageGroup.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
744. MeasureReport.group:claimed.stratifier.stratum.component:ageGroup.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
746. MeasureReport.group:claimed.stratifier.stratum.component:ageGroup.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "age-group"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="age-group"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
748. MeasureReport.group:claimed.stratifier.stratum.component:ageGroup.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from AgeGroupFinancingBinary (1.0.0)
(required to https://terminology.shif.uz/fhir/core/ValueSet/age-group-financing-binary-vs|1.0.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
750. MeasureReport.group:claimed.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..0
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
761. MeasureReport.group:claimed.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control1..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
763. MeasureReport.group:claimed.stratifier.stratum.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
765. MeasureReport.group:claimed.stratifier.stratum.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
767. MeasureReport.group:claimed.stratifier.stratum.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
769. MeasureReport.group:claimed.stratifier.stratum.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
771. MeasureReport.group:claimed.stratifier.stratum.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
773. MeasureReport.group:claimed.stratifier.stratum.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
775. MeasureReport.group:claimed.stratifier.stratum.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
777. MeasureReport.group:payable
Slice Namepayable
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control1..1
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
shif-budget-strata-with-amount: A group without an amount has no strata. (measureScore.exists() or stratifier.stratum.empty())
779. MeasureReport.group:payable.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
781. MeasureReport.group:payable.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
783. MeasureReport.group:payable.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
785. MeasureReport.group:payable.linkId
Definition

The group from the Measure that corresponds to this group in the MeasureReport resource.

ShortPointer to specific group from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
787. MeasureReport.group:payable.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "payable"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="payable"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
789. MeasureReport.group:payable.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..1
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
791. MeasureReport.group:payable.population
Definition

The populations that make up the population group, one for each type of population appropriate for the measure.

ShortThe populations in the group
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
793. MeasureReport.group:payable.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
795. MeasureReport.group:payable.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
797. MeasureReport.group:payable.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
799. MeasureReport.group:payable.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
801. MeasureReport.group:payable.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
803. MeasureReport.group:payable.population.count
Definition

The number of members of the population.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
805. MeasureReport.group:payable.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
807. MeasureReport.group:payable.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
809. MeasureReport.group:payable.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
811. MeasureReport.group:payable.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this state
Control0..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
813. MeasureReport.group:payable.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
815. MeasureReport.group:payable.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
817. MeasureReport.group:payable.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
819. MeasureReport.group:payable.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
821. MeasureReport.group:payable.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
823. MeasureReport.group:payable.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
825. MeasureReport.group:payable.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
827. MeasureReport.group:payable.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control1..1
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
829. MeasureReport.group:payable.stratifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
831. MeasureReport.group:payable.stratifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
833. MeasureReport.group:payable.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
835. MeasureReport.group:payable.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Pattern Value
{
  "linkId" : "icd10-chapter-age-group"
}
<linkId value="icd10-chapter-age-group"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
837. MeasureReport.group:payable.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..0
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
839. MeasureReport.group:payable.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortThe amounts of the strata add up to the amount of the group; no strata when the group has no amount
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
841. MeasureReport.group:payable.stratifier.stratum.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
843. MeasureReport.group:payable.stratifier.stratum.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
845. MeasureReport.group:payable.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
847. MeasureReport.group:payable.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..0
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
849. MeasureReport.group:payable.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control2..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.component. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code
851. MeasureReport.group:payable.stratifier.stratum.component.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
853. MeasureReport.group:payable.stratifier.stratum.component.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
855. MeasureReport.group:payable.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
857. MeasureReport.group:payable.stratifier.stratum.component.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
859. MeasureReport.group:payable.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
861. MeasureReport.group:payable.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
863. MeasureReport.group:payable.stratifier.stratum.component:icd10Chapter
Slice Nameicd10Chapter
Definition

A stratifier component value.

ShortStratifier component values
Control1..1
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
865. MeasureReport.group:payable.stratifier.stratum.component:icd10Chapter.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
867. MeasureReport.group:payable.stratifier.stratum.component:icd10Chapter.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
869. MeasureReport.group:payable.stratifier.stratum.component:icd10Chapter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
871. MeasureReport.group:payable.stratifier.stratum.component:icd10Chapter.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
873. MeasureReport.group:payable.stratifier.stratum.component:icd10Chapter.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "icd10-chapter"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="icd10-chapter"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
875. MeasureReport.group:payable.stratifier.stratum.component:icd10Chapter.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from ICD10ChapterVS (0.9.0)
(required to https://ig.shif.uz/core/ValueSet/icd10-chapter-vs|0.9.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
877. MeasureReport.group:payable.stratifier.stratum.component:ageGroup
Slice NameageGroup
Definition

A stratifier component value.

ShortStratifier component values
Control1..1
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
879. MeasureReport.group:payable.stratifier.stratum.component:ageGroup.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
881. MeasureReport.group:payable.stratifier.stratum.component:ageGroup.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
883. MeasureReport.group:payable.stratifier.stratum.component:ageGroup.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
885. MeasureReport.group:payable.stratifier.stratum.component:ageGroup.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
887. MeasureReport.group:payable.stratifier.stratum.component:ageGroup.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs",
      "code" : "age-group"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-dimension-cs"/>
    <code value="age-group"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
889. MeasureReport.group:payable.stratifier.stratum.component:ageGroup.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingThe codes SHALL be taken from AgeGroupFinancingBinary (1.0.0)
(required to https://terminology.shif.uz/fhir/core/ValueSet/age-group-financing-binary-vs|1.0.0)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
891. MeasureReport.group:payable.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..0
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
902. MeasureReport.group:payable.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control1..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
904. MeasureReport.group:payable.stratifier.stratum.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
906. MeasureReport.group:payable.stratifier.stratum.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.stratifier.stratum.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
908. MeasureReport.group:payable.stratifier.stratum.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
910. MeasureReport.group:payable.stratifier.stratum.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
912. MeasureReport.group:payable.stratifier.stratum.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
914. MeasureReport.group:payable.stratifier.stratum.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
916. MeasureReport.group:payable.stratifier.stratum.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
918. MeasureReport.supplementalData
Definition

A reference to a Resource that represents additional information collected for the report. If the value of the supplemental data is not a Resource (i.e. evaluating the supplementalData expression for this case in the measure results in a value that is not a FHIR Resource), it is reported as a reference to a contained Observation resource.

ShortAdditional information collected for the report
Comments

For individual measure reports, the supplementalData elements represent the direct result of evaluating the supplementalData expression for the subject of the report. For summary reports, supplementalData is reported as references to contained Observation resources that represent the number of times each value appeared as a supplementalData result for members of the population.

Control0..*
TypeReference(Resource)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
920. MeasureReport.evaluatedResource
Definition

Evaluated resources are used to capture what data was involved in the calculation of a measure. This usage is only allowed for individual reports to ensure that the size of the MeasureReport resource is bounded.

ShortWhat data was used to calculate the measure score
Comments

Evaluated resources are only reported for individual reports.

Control0..*
TypeReference(Resource)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))