Uzbekistan State Health Insurance Fund Core
0.9.0 - ci-build Uzbekistan flag

Uzbekistan State Health Insurance Fund Core - Local Development build (v0.9.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: SHIF Program Budget Report by Organization - Detailed Descriptions

Draft as of 2026-11-20

Definitions for the shif-program-budget-by-organization-report resource profile

See the documentation on how to interpret the contents of this table

0. MeasureReport
Definition

The MeasureReport resource contains the results of the calculation of a measure; and optionally a reference to the resources involved in that calculation.

ShortResults of a measure evaluation
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
mrp-1: Measure Reports used for data collection SHALL NOT communicate group and score information ((type != 'data-exchange') or group.exists().not())
mrp-2: Stratifiers SHALL be either a single criteria or a set of criteria components (group.stratifier.stratum.all(value.exists() xor component.exists()))
shif-budget-by-organization-measure: The report is for the measure shif-program-budget-by-organization. (measure = 'https://ig.shif.uz/core/Measure/shif-program-budget-by-organization' or measure.startsWith('https://ig.shif.uz/core/Measure/shif-program-budget-by-organization|'))
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
mrp-1: Measure Reports used for data collection SHALL NOT communicate group and score information ((type != 'data-exchange') or group.exists().not())
mrp-2: Stratifiers SHALL be either a single criteria or a set of criteria components (group.stratifier.stratum.all(value.exists() xor component.exists()))
2. MeasureReport.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. MeasureReport.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. MeasureReport.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control10..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
8. MeasureReport.extension:program
Slice Nameprogram
Definition

Program of the State Health Insurance Fund. On a report, the program the report is for: one report covers one program, and the program is data, so the profiles and measures are shared by all programs. On a referral or a prescription, the program the request is issued under: the medical data carry the program, the information system sets it before the request is submitted to the Fund, and the Fund checks at intake that it equals Claim.subType of the claim based on the request.

ShortSHIF Program
Control1..1
TypeExtension(SHIF Program) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. MeasureReport.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. MeasureReport.status
Definition

The MeasureReport status. No data will be available until the MeasureReport status is complete.

ShortA snapshot is complete when published and never changescomplete | pending | error
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from MeasureReportStatushttp://hl7.org/fhir/ValueSet/measure-report-status|5.0.0
(required to http://hl7.org/fhir/ValueSet/measure-report-status|5.0.0)

The status of the measure report (e.g. complete, pending, or error)

Typecode
Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Pattern Value
{
  "status" : "complete"
}
<status value="complete"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. MeasureReport.type
Definition

The type of measure report. This may be an individual report, which provides the score for the measure for an individual member of the population; a subject-listing, which returns the list of members that meet the various criteria in the measure; a summary report, which returns a population count for each of the criteria in the measure; or a data-collection, which enables the MeasureReport to be used to exchange the data-of-interest for a quality measure.

Shortindividual | subject-list | summary | data-exchange
Comments

Data-exchange reports are used only to communicate data-of-interest for a measure. They do not necessarily include all the data for a particular subject or population, but they may.

Control1..1
This element is affected by the following invariants: mrp-1
BindingThe codes SHALL be taken from MeasureReportTypehttp://hl7.org/fhir/ValueSet/measure-report-type|5.0.0
(required to http://hl7.org/fhir/ValueSet/measure-report-type|5.0.0)

The type of the measure report: individual, patient listing, or summary

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Pattern Value
{
  "type" : "summary"
}
<type value="summary"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. MeasureReport.dataUpdateType
Definition

Indicates whether the data submitted in a data-exchange report represents a snapshot or incremental update. A snapshot update replaces all previously submitted data for the receiver, whereas an incremental update represents only updated and/or changed data and should be applied as a differential update to the existing submitted data for the receiver.

Shortincremental | snapshot
Comments

This element only applies to Data-collection reports used to communicate the data-of-interest for a measure

Control0..1
BindingThe codes SHALL be taken from SubmitDataUpdateTypehttp://hl7.org/fhir/ValueSet/submit-data-update-type|5.0.0
(required to http://hl7.org/fhir/ValueSet/submit-data-update-type|5.0.0)
Typecode
Is Modifiertrue because This element determines whether the data in a data-exchange measure report is a snapshot or incremental update and is required in order to correctly apply the data update to a receiving system
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

Allows receiving systems to support incremental exchange of data, reducing overall bandwidth requirements.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. MeasureReport.measure
Definition

A reference to the Measure that was calculated to produce this report.

Shorthttps://ig.shif.uz/core/Measure/shif-program-budget-by-organizationWhat measure was calculated
Control10..1
Typecanonical(Measure)
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. MeasureReport.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortHealthcare organization, by its tax number (INN); no internal identifiersWhat individual(s) the report is for
Control10..1
TypeReference(SHIF Organization, CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. MeasureReport.subject.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

ShortLiteral reference, Relative, internal or absolute URL
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

Control0..01
This element is affected by the following invariants: ref-2, ref-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. MeasureReport.subject.identifier
Definition

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

ShortLogical reference, when literal reference is not known
Comments

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

This element only allows for a single identifier. In the case where additional identifers are required, use the http://hl7.org/fhir/StructureDefinition/additionalIdentifier extension.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..1
This element is affected by the following invariants: ref-2
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. MeasureReport.subject.identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|5.0.0
(required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0)

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. MeasureReport.subject.identifier.system
Definition

Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Pattern Value
{
  "system" : "https://dhp.uz/fhir/core/sid/org/uz/soliq"
}
<system value="https://dhp.uz/fhir/core/sid/org/uz/soliq"/>
ExampleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. MeasureReport.subject.identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
This element is affected by the following invariants: ident-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
ExampleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. MeasureReport.date
Definition

The date this measure was calculated.

ShortMoment of the snapshot: 00:20 Tashkent time (UTC+5) of the snapshot dateWhen the measure was calculated
Control10..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. MeasureReport.period
Definition

The reporting period for which the report was calculated.

ShortFiscal year of the program budgetWhat period the report covers
Control1..1
TypePeriod
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. MeasureReport.scoring
Definition

Indicates how the calculation is performed for the measure, including proportion, ratio, continuous-variable, and cohort. The value set is extensible, allowing additional measure scoring types to be represented. It is expected to be the same as the scoring element on the referenced Measure.

ShortWhat scoring method (e.g. proportion, ratio, continuous-variable)
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasureScoring (2.0.0)http://terminology.hl7.org/ValueSet/measure-scoring
(extensible to http://terminology.hl7.org/ValueSet/measure-scoring|2.0.0)
TypeCodeableConcept
Is Modifiertrue because Scoring determines what method was used to calculate the measure score and is required for correct interpretation of the score
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. MeasureReport.improvementNotation
Definition

Whether improvement in the measure is noted by an increase or decrease in the measure score.

Shortincrease | decrease
Comments

This element is typically defined by the measure, but reproduced here to ensure the measure score can be interpreted. The element is labeled as a modifier because it changes the interpretation of the reported measure score. Note also that a MeasureReport instance includes the improvementNotation as defined by the Measure being reported. It is duplicated in the MeasureReport because it is a critical aspect of interpreting the measure score but it is not intended to reflect whether the measure report is an increase or decrease. It helps interpret if the measure score is an increase or decrease, I.e., moving in the direction of the desired outcome.

Control0..1
BindingThe codes SHALL be taken from MeasureImprovementNotationhttp://hl7.org/fhir/ValueSet/measure-improvement-notation|5.0.0
(required to http://hl7.org/fhir/ValueSet/measure-improvement-notation|5.0.0)

The improvement notation of the measure report (e.g. increase or decrease)

TypeCodeableConcept
Is Modifiertrue because Improvement notation determines how to interpret the measure score (i.e. whether an increase is an improvement)
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. MeasureReport.group
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control50..*
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MeasureReport.group. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

42. MeasureReport.group.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
44. MeasureReport.group.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control10..1
BindingFor example codes, see MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. MeasureReport.group.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..01
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. MeasureReport.group.population
Definition

The populations that make up the population group, one for each type of population appropriate for the measure.

ShortThe populations in the group
Control0..0*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
51. MeasureReport.group.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control0..0*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. MeasureReport.group:availableOwnBudget
Slice NameavailableOwnBudget
Definition

The results of the calculation, one for each population group in the measure.

ShortHas an amount only for an organization with an own budget it is currently admitted to reserve from; without an amount otherwise, not zeroMeasure results for each group
Control10..1*
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. MeasureReport.group:availableOwnBudget.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
58. MeasureReport.group:availableOwnBudget.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "available-own-budget"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="available-own-budget"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. MeasureReport.group:availableOwnBudget.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Control0..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. MeasureReport.group:availableOwnBudget.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. MeasureReport.group:availableOwnBudget.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. MeasureReport.group:availableOwnBudget.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. MeasureReport.group:availableOwnBudget.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. MeasureReport.group:reserved
Slice Namereserved
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control10..1*
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. MeasureReport.group:reserved.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
74. MeasureReport.group:reserved.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. MeasureReport.group:reserved.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Control0..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. MeasureReport.group:reserved.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
80. MeasureReport.group:reserved.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. MeasureReport.group:reserved.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. MeasureReport.group:reserved.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. MeasureReport.group:reservedBudgetOverride
Slice NamereservedBudgetOverride
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control10..1*
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. MeasureReport.group:reservedBudgetOverride.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
90. MeasureReport.group:reservedBudgetOverride.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved-budget-override"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved-budget-override"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. MeasureReport.group:reservedBudgetOverride.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Control0..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. MeasureReport.group:reservedBudgetOverride.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. MeasureReport.group:reservedBudgetOverride.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
98. MeasureReport.group:reservedBudgetOverride.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. MeasureReport.group:reservedBudgetOverride.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. MeasureReport.group:claimed
Slice Nameclaimed
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control10..1*
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. MeasureReport.group:claimed.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
106. MeasureReport.group:claimed.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "claimed"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="claimed"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
108. MeasureReport.group:claimed.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Control0..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
110. MeasureReport.group:claimed.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
112. MeasureReport.group:claimed.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
114. MeasureReport.group:claimed.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
116. MeasureReport.group:claimed.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
118. MeasureReport.group:payable
Slice Namepayable
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control10..1*
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
120. MeasureReport.group:payable.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
122. MeasureReport.group:payable.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "payable"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="payable"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
124. MeasureReport.group:payable.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Control0..1
TypeQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
126. MeasureReport.group:payable.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
128. MeasureReport.group:payable.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
130. MeasureReport.group:payable.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control10..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
132. MeasureReport.group:payable.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

See the documentation on how to interpret the contents of this table

0. MeasureReport
Invariantsshif-budget-by-organization-measure: The report is for the measure shif-program-budget-by-organization. (measure = 'https://ig.shif.uz/core/Measure/shif-program-budget-by-organization' or measure.startsWith('https://ig.shif.uz/core/Measure/shif-program-budget-by-organization|'))
2. MeasureReport.extension
Control1..?
SlicingThis element introduces a set of slices on MeasureReport.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
4. MeasureReport.extension:program
Slice Nameprogram
Control1..1
TypeExtension(SHIF Program) (Extension Type: CodeableConcept)
Must Supporttrue
6. MeasureReport.status
ShortA snapshot is complete when published and never changes
Pattern Value
{
  "status" : "complete"
}
<status value="complete"/>
8. MeasureReport.type
Pattern Value
{
  "type" : "summary"
}
<type value="summary"/>
10. MeasureReport.measure
Shorthttps://ig.shif.uz/core/Measure/shif-program-budget-by-organization
Control1..?
Must Supporttrue
12. MeasureReport.subject
ShortHealthcare organization, by its tax number (INN); no internal identifiers
Control1..?
TypeReference(SHIF Organization)
Must Supporttrue
14. MeasureReport.subject.reference
Control0..0
16. MeasureReport.subject.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..?
Must Supporttrue
18. MeasureReport.subject.identifier.system
Control1..?
Pattern Value
{
  "system" : "https://dhp.uz/fhir/core/sid/org/uz/soliq"
}
<system value="https://dhp.uz/fhir/core/sid/org/uz/soliq"/>
20. MeasureReport.subject.identifier.value
Control1..?
22. MeasureReport.date
ShortMoment of the snapshot: 00:20 Tashkent time (UTC+5) of the snapshot date
Control1..?
Must Supporttrue
24. MeasureReport.period
ShortFiscal year of the program budget
Must Supporttrue
26. MeasureReport.group
Control5..?
Must Supporttrue
SlicingThis element introduces a set of slices on MeasureReport.group. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

28. MeasureReport.group.code
Control1..?
30. MeasureReport.group.subject
Control0..0
32. MeasureReport.group.population
Control0..0
34. MeasureReport.group.stratifier
Control0..0
36. MeasureReport.group:availableOwnBudget
Slice NameavailableOwnBudget
ShortHas an amount only for an organization with an own budget it is currently admitted to reserve from; without an amount otherwise, not zero
Control1..1
Must Supporttrue
38. MeasureReport.group:availableOwnBudget.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "available-own-budget"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="available-own-budget"/>
  </coding>
</code>
40. MeasureReport.group:availableOwnBudget.measureScore[x]
ShortAmount in UZS; absent when the program or the organization does not have this state
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
42. MeasureReport.group:availableOwnBudget.measureScore[x].value
Control1..?
44. MeasureReport.group:availableOwnBudget.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
46. MeasureReport.group:availableOwnBudget.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
48. MeasureReport.group:reserved
Slice Namereserved
Control1..1
Must Supporttrue
50. MeasureReport.group:reserved.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved"/>
  </coding>
</code>
52. MeasureReport.group:reserved.measureScore[x]
ShortAmount in UZS; absent when the program or the organization does not have this state
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
54. MeasureReport.group:reserved.measureScore[x].value
Control1..?
56. MeasureReport.group:reserved.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
58. MeasureReport.group:reserved.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
60. MeasureReport.group:reservedBudgetOverride
Slice NamereservedBudgetOverride
Control1..1
Must Supporttrue
62. MeasureReport.group:reservedBudgetOverride.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved-budget-override"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved-budget-override"/>
  </coding>
</code>
64. MeasureReport.group:reservedBudgetOverride.measureScore[x]
ShortAmount in UZS; absent when the program or the organization does not have this state
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
66. MeasureReport.group:reservedBudgetOverride.measureScore[x].value
Control1..?
68. MeasureReport.group:reservedBudgetOverride.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
70. MeasureReport.group:reservedBudgetOverride.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
72. MeasureReport.group:claimed
Slice Nameclaimed
Control1..1
Must Supporttrue
74. MeasureReport.group:claimed.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "claimed"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="claimed"/>
  </coding>
</code>
76. MeasureReport.group:claimed.measureScore[x]
ShortAmount in UZS; absent when the program or the organization does not have this state
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
78. MeasureReport.group:claimed.measureScore[x].value
Control1..?
80. MeasureReport.group:claimed.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
82. MeasureReport.group:claimed.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
84. MeasureReport.group:payable
Slice Namepayable
Control1..1
Must Supporttrue
86. MeasureReport.group:payable.code
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "payable"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="payable"/>
  </coding>
</code>
88. MeasureReport.group:payable.measureScore[x]
ShortAmount in UZS; absent when the program or the organization does not have this state
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
90. MeasureReport.group:payable.measureScore[x].value
Control1..?
92. MeasureReport.group:payable.measureScore[x].system
Control1..?
Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
94. MeasureReport.group:payable.measureScore[x].code
Control1..?
Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>

See the documentation on how to interpret the contents of this table

0. MeasureReport
Definition

The MeasureReport resource contains the results of the calculation of a measure; and optionally a reference to the resources involved in that calculation.

ShortResults of a measure evaluation
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
mrp-1: Measure Reports used for data collection SHALL NOT communicate group and score information ((type != 'data-exchange') or group.exists().not())
mrp-2: Stratifiers SHALL be either a single criteria or a set of criteria components (group.stratifier.stratum.all(value.exists() xor component.exists()))
shif-budget-by-organization-measure: The report is for the measure shif-program-budget-by-organization. (measure = 'https://ig.shif.uz/core/Measure/shif-program-budget-by-organization' or measure.startsWith('https://ig.shif.uz/core/Measure/shif-program-budget-by-organization|'))
2. MeasureReport.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

Control0..1
Typeid
Is Modifierfalse
Must Supportfalse
Summarytrue
4. MeasureReport.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. MeasureReport.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. MeasureReport.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHALL be taken from AllLanguages
(required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

IETF language tag for a human language

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. MeasureReport.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
This element is affected by the following invariants: dom-6
TypeNarrative
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. MeasureReport.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. MeasureReport.extension
Definition

An Extension

ShortExtension
Control1..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
16. MeasureReport.extension:program
Slice Nameprogram
Definition

Program of the State Health Insurance Fund. On a report, the program the report is for: one report covers one program, and the program is data, so the profiles and measures are shared by all programs. On a referral or a prescription, the program the request is issued under: the medical data carry the program, the information system sets it before the request is submitted to the Fund, and the Fund checks at intake that it equals Claim.subType of the claim based on the request.

ShortSHIF Program
Control1..1
TypeExtension(SHIF Program) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. MeasureReport.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. MeasureReport.identifier
Definition

A formal identifier that is used to identify this MeasureReport when it is represented in other formats or referenced in a specification, model, design or an instance.

ShortAdditional identifier for the MeasureReport
Comments

Typically, this is used for identifiers that can go in an HL7 V3 II data type - e.g. to identify this {{title}} outside of FHIR, where the logical URL is not possible to use.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Allows externally provided and/or usable business identifiers to be easily associated with the module.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. MeasureReport.status
Definition

The MeasureReport status. No data will be available until the MeasureReport status is complete.

ShortA snapshot is complete when published and never changes
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from MeasureReportStatus
(required to http://hl7.org/fhir/ValueSet/measure-report-status|5.0.0)

The status of the measure report (e.g. complete, pending, or error)

Typecode
Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Pattern Value
{
  "status" : "complete"
}
<status value="complete"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. MeasureReport.type
Definition

The type of measure report. This may be an individual report, which provides the score for the measure for an individual member of the population; a subject-listing, which returns the list of members that meet the various criteria in the measure; a summary report, which returns a population count for each of the criteria in the measure; or a data-collection, which enables the MeasureReport to be used to exchange the data-of-interest for a quality measure.

Shortindividual | subject-list | summary | data-exchange
Comments

Data-exchange reports are used only to communicate data-of-interest for a measure. They do not necessarily include all the data for a particular subject or population, but they may.

Control1..1
This element is affected by the following invariants: mrp-1
BindingThe codes SHALL be taken from MeasureReportType
(required to http://hl7.org/fhir/ValueSet/measure-report-type|5.0.0)

The type of the measure report: individual, patient listing, or summary

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Pattern Value
{
  "type" : "summary"
}
<type value="summary"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. MeasureReport.dataUpdateType
Definition

Indicates whether the data submitted in a data-exchange report represents a snapshot or incremental update. A snapshot update replaces all previously submitted data for the receiver, whereas an incremental update represents only updated and/or changed data and should be applied as a differential update to the existing submitted data for the receiver.

Shortincremental | snapshot
Comments

This element only applies to Data-collection reports used to communicate the data-of-interest for a measure

Control0..1
BindingThe codes SHALL be taken from SubmitDataUpdateType
(required to http://hl7.org/fhir/ValueSet/submit-data-update-type|5.0.0)
Typecode
Is Modifiertrue because This element determines whether the data in a data-exchange measure report is a snapshot or incremental update and is required in order to correctly apply the data update to a receiving system
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

Allows receiving systems to support incremental exchange of data, reducing overall bandwidth requirements.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. MeasureReport.measure
Definition

A reference to the Measure that was calculated to produce this report.

Shorthttps://ig.shif.uz/core/Measure/shif-program-budget-by-organization
Control1..1
Typecanonical(Measure)
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. MeasureReport.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortHealthcare organization, by its tax number (INN); no internal identifiers
Control1..1
TypeReference(SHIF Organization)
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. MeasureReport.subject.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
34. MeasureReport.subject.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.subject.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
36. MeasureReport.subject.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

ShortLiteral reference, Relative, internal or absolute URL
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

Control0..0
This element is affected by the following invariants: ref-2, ref-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. MeasureReport.subject.type
Definition

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

ShortType the reference refers to (e.g. "Patient") - must be a resource in resources
Comments

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a known RESTful URL) or by resolving the target of the reference.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from ResourceType
(extensible to http://hl7.org/fhir/ValueSet/resource-types|5.0.0)

Aa resource (or, for logical models, the URI of the logical model).

Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. MeasureReport.subject.identifier
Definition

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

ShortLogical reference, when literal reference is not known
Comments

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

This element only allows for a single identifier. In the case where additional identifers are required, use the http://hl7.org/fhir/StructureDefinition/additionalIdentifier extension.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..1
This element is affected by the following invariants: ref-2
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. MeasureReport.subject.identifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
44. MeasureReport.subject.identifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.subject.identifier.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
46. MeasureReport.subject.identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUse
(required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0)

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. MeasureReport.subject.identifier.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortDescription of identifier
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from IdentifierTypeCodes
(extensible to http://hl7.org/fhir/ValueSet/identifier-type|5.0.0)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. MeasureReport.subject.identifier.system
Definition

Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control1..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Pattern Value
{
  "system" : "https://dhp.uz/fhir/core/sid/org/uz/soliq"
}
<system value="https://dhp.uz/fhir/core/sid/org/uz/soliq"/>
ExampleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. MeasureReport.subject.identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control1..1
This element is affected by the following invariants: ident-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
ExampleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. MeasureReport.subject.identifier.period
Definition

Time period during which identifier is/was valid for use.

ShortTime period when id is/was valid for use
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. MeasureReport.subject.identifier.assigner
Definition

Organization that issued/manages the identifier.

ShortOrganization that issued id (may be just text)
Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Control0..1
TypeReference(Organization)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. MeasureReport.subject.display
Definition

Plain text narrative that identifies the resource in addition to the resource reference.

ShortText alternative for the resource
Comments

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

Control0..1
This element is affected by the following invariants: ref-2
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. MeasureReport.date
Definition

The date this measure was calculated.

ShortMoment of the snapshot: 00:20 Tashkent time (UTC+5) of the snapshot date
Control1..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. MeasureReport.reporter
Definition

The individual or organization that is reporting the data.

ShortWho is reporting the data
Control0..1
TypeReference(Practitioner, PractitionerRole, Organization, Group)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. MeasureReport.reportingVendor
Definition

A reference to the vendor who queried the data, calculated results and/or generated the report. The ‘reporting vendor’ is intended to represent the submitting entity when it is not the same as the reporting entity. This extension is used when the Receiver is interested in getting vendor information in the report.

ShortWhat vendor prepared the data
Control0..1
TypeReference(Organization)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. MeasureReport.location
Definition

A reference to the location for which the data is being reported.

ShortWhere the reported data is from
Control0..1
TypeReference(Location)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. MeasureReport.period
Definition

The reporting period for which the report was calculated.

ShortFiscal year of the program budget
Control1..1
TypePeriod
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. MeasureReport.inputParameters
Definition

A reference to a Parameters resource (typically represented using a contained resource) that represents any input parameters that were provided to the operation that generated the report.

ShortWhat parameters were provided to the report
Comments

Whenever an operation returns a MeasureReport, the IN parameters from that operation can be returned to the caller of the operation using MeasureReport.inputParameters. Operations include but are not limited to $evaluate-measure, $care-gaps, $data-requirements, and $collect-data. The inputParameters can also be used in a MeasureReport used to define a test case (i.e., not as a result of an operation).

Control0..1
TypeReference(Parameters)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. MeasureReport.scoring
Definition

Indicates how the calculation is performed for the measure, including proportion, ratio, continuous-variable, and cohort. The value set is extensible, allowing additional measure scoring types to be represented. It is expected to be the same as the scoring element on the referenced Measure.

ShortWhat scoring method (e.g. proportion, ratio, continuous-variable)
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasureScoring (2.0.0)
(extensible to http://terminology.hl7.org/ValueSet/measure-scoring|2.0.0)
TypeCodeableConcept
Is Modifiertrue because Scoring determines what method was used to calculate the measure score and is required for correct interpretation of the score
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. MeasureReport.improvementNotation
Definition

Whether improvement in the measure is noted by an increase or decrease in the measure score.

Shortincrease | decrease
Comments

This element is typically defined by the measure, but reproduced here to ensure the measure score can be interpreted. The element is labeled as a modifier because it changes the interpretation of the reported measure score. Note also that a MeasureReport instance includes the improvementNotation as defined by the Measure being reported. It is duplicated in the MeasureReport because it is a critical aspect of interpreting the measure score but it is not intended to reflect whether the measure report is an increase or decrease. It helps interpret if the measure score is an increase or decrease, I.e., moving in the direction of the desired outcome.

Control0..1
BindingThe codes SHALL be taken from MeasureImprovementNotation
(required to http://hl7.org/fhir/ValueSet/measure-improvement-notation|5.0.0)

The improvement notation of the measure report (e.g. increase or decrease)

TypeCodeableConcept
Is Modifiertrue because Improvement notation determines how to interpret the measure score (i.e. whether an increase is an improvement)
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. MeasureReport.group
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control5..*
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MeasureReport.group. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
  • value @ code

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

78. MeasureReport.group.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
80. MeasureReport.group.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
82. MeasureReport.group.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
84. MeasureReport.group.linkId
Definition

The group from the Measure that corresponds to this group in the MeasureReport resource.

ShortPointer to specific group from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. MeasureReport.group.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control1..1
BindingFor example codes, see MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. MeasureReport.group.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..0
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. MeasureReport.group.population
Definition

The populations that make up the population group, one for each type of population appropriate for the measure.

ShortThe populations in the group
Control0..0
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
101. MeasureReport.group.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortWhat score this group achieved
Control0..1
TypeChoice of: Quantity, dateTime, CodeableConcept, Period, Range, Duration
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
103. MeasureReport.group.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control0..0
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
133. MeasureReport.group:availableOwnBudget
Slice NameavailableOwnBudget
Definition

The results of the calculation, one for each population group in the measure.

ShortHas an amount only for an organization with an own budget it is currently admitted to reserve from; without an amount otherwise, not zero
Control1..1
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
135. MeasureReport.group:availableOwnBudget.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
137. MeasureReport.group:availableOwnBudget.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
139. MeasureReport.group:availableOwnBudget.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
141. MeasureReport.group:availableOwnBudget.linkId
Definition

The group from the Measure that corresponds to this group in the MeasureReport resource.

ShortPointer to specific group from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
143. MeasureReport.group:availableOwnBudget.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "available-own-budget"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="available-own-budget"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
145. MeasureReport.group:availableOwnBudget.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..1
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
147. MeasureReport.group:availableOwnBudget.population
Definition

The populations that make up the population group, one for each type of population appropriate for the measure.

ShortThe populations in the group
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
149. MeasureReport.group:availableOwnBudget.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
151. MeasureReport.group:availableOwnBudget.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
153. MeasureReport.group:availableOwnBudget.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
155. MeasureReport.group:availableOwnBudget.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
157. MeasureReport.group:availableOwnBudget.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
159. MeasureReport.group:availableOwnBudget.population.count
Definition

The number of members of the population.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
161. MeasureReport.group:availableOwnBudget.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
163. MeasureReport.group:availableOwnBudget.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
165. MeasureReport.group:availableOwnBudget.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
167. MeasureReport.group:availableOwnBudget.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this state
Control0..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
169. MeasureReport.group:availableOwnBudget.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
171. MeasureReport.group:availableOwnBudget.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
173. MeasureReport.group:availableOwnBudget.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
175. MeasureReport.group:availableOwnBudget.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
177. MeasureReport.group:availableOwnBudget.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
179. MeasureReport.group:availableOwnBudget.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
181. MeasureReport.group:availableOwnBudget.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
183. MeasureReport.group:availableOwnBudget.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
185. MeasureReport.group:availableOwnBudget.stratifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
187. MeasureReport.group:availableOwnBudget.stratifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
189. MeasureReport.group:availableOwnBudget.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
191. MeasureReport.group:availableOwnBudget.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
193. MeasureReport.group:availableOwnBudget.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
195. MeasureReport.group:availableOwnBudget.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
197. MeasureReport.group:availableOwnBudget.stratifier.stratum.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
199. MeasureReport.group:availableOwnBudget.stratifier.stratum.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
201. MeasureReport.group:availableOwnBudget.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
203. MeasureReport.group:availableOwnBudget.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..1
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
205. MeasureReport.group:availableOwnBudget.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
207. MeasureReport.group:availableOwnBudget.stratifier.stratum.component.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
209. MeasureReport.group:availableOwnBudget.stratifier.stratum.component.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
211. MeasureReport.group:availableOwnBudget.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
213. MeasureReport.group:availableOwnBudget.stratifier.stratum.component.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
215. MeasureReport.group:availableOwnBudget.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
217. MeasureReport.group:availableOwnBudget.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
219. MeasureReport.group:availableOwnBudget.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
221. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
223. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
225. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
227. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
229. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
231. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.count
Definition

The number of members of the population in this stratum.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
233. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population in this stratum.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
235. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
237. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
239. MeasureReport.group:availableOwnBudget.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control0..1
TypeChoice of: Quantity, dateTime, CodeableConcept, Period, Range, Duration
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
241. MeasureReport.group:reserved
Slice Namereserved
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control1..1
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
243. MeasureReport.group:reserved.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
245. MeasureReport.group:reserved.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
247. MeasureReport.group:reserved.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
249. MeasureReport.group:reserved.linkId
Definition

The group from the Measure that corresponds to this group in the MeasureReport resource.

ShortPointer to specific group from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
251. MeasureReport.group:reserved.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
253. MeasureReport.group:reserved.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..1
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
255. MeasureReport.group:reserved.population
Definition

The populations that make up the population group, one for each type of population appropriate for the measure.

ShortThe populations in the group
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
257. MeasureReport.group:reserved.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
259. MeasureReport.group:reserved.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
261. MeasureReport.group:reserved.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
263. MeasureReport.group:reserved.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
265. MeasureReport.group:reserved.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
267. MeasureReport.group:reserved.population.count
Definition

The number of members of the population.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
269. MeasureReport.group:reserved.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
271. MeasureReport.group:reserved.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
273. MeasureReport.group:reserved.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
275. MeasureReport.group:reserved.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this state
Control0..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
277. MeasureReport.group:reserved.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
279. MeasureReport.group:reserved.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
281. MeasureReport.group:reserved.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
283. MeasureReport.group:reserved.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
285. MeasureReport.group:reserved.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
287. MeasureReport.group:reserved.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
289. MeasureReport.group:reserved.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
291. MeasureReport.group:reserved.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
293. MeasureReport.group:reserved.stratifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
295. MeasureReport.group:reserved.stratifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
297. MeasureReport.group:reserved.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
299. MeasureReport.group:reserved.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
301. MeasureReport.group:reserved.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
303. MeasureReport.group:reserved.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
305. MeasureReport.group:reserved.stratifier.stratum.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
307. MeasureReport.group:reserved.stratifier.stratum.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
309. MeasureReport.group:reserved.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
311. MeasureReport.group:reserved.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..1
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
313. MeasureReport.group:reserved.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
315. MeasureReport.group:reserved.stratifier.stratum.component.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
317. MeasureReport.group:reserved.stratifier.stratum.component.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
319. MeasureReport.group:reserved.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
321. MeasureReport.group:reserved.stratifier.stratum.component.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
323. MeasureReport.group:reserved.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
325. MeasureReport.group:reserved.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
327. MeasureReport.group:reserved.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
329. MeasureReport.group:reserved.stratifier.stratum.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
331. MeasureReport.group:reserved.stratifier.stratum.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
333. MeasureReport.group:reserved.stratifier.stratum.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
335. MeasureReport.group:reserved.stratifier.stratum.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
337. MeasureReport.group:reserved.stratifier.stratum.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
339. MeasureReport.group:reserved.stratifier.stratum.population.count
Definition

The number of members of the population in this stratum.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
341. MeasureReport.group:reserved.stratifier.stratum.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population in this stratum.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
343. MeasureReport.group:reserved.stratifier.stratum.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
345. MeasureReport.group:reserved.stratifier.stratum.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
347. MeasureReport.group:reserved.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control0..1
TypeChoice of: Quantity, dateTime, CodeableConcept, Period, Range, Duration
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
349. MeasureReport.group:reservedBudgetOverride
Slice NamereservedBudgetOverride
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control1..1
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
351. MeasureReport.group:reservedBudgetOverride.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
353. MeasureReport.group:reservedBudgetOverride.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
355. MeasureReport.group:reservedBudgetOverride.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
357. MeasureReport.group:reservedBudgetOverride.linkId
Definition

The group from the Measure that corresponds to this group in the MeasureReport resource.

ShortPointer to specific group from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
359. MeasureReport.group:reservedBudgetOverride.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved-budget-override"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved-budget-override"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
361. MeasureReport.group:reservedBudgetOverride.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..1
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
363. MeasureReport.group:reservedBudgetOverride.population
Definition

The populations that make up the population group, one for each type of population appropriate for the measure.

ShortThe populations in the group
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
365. MeasureReport.group:reservedBudgetOverride.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
367. MeasureReport.group:reservedBudgetOverride.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
369. MeasureReport.group:reservedBudgetOverride.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
371. MeasureReport.group:reservedBudgetOverride.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
373. MeasureReport.group:reservedBudgetOverride.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
375. MeasureReport.group:reservedBudgetOverride.population.count
Definition

The number of members of the population.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
377. MeasureReport.group:reservedBudgetOverride.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
379. MeasureReport.group:reservedBudgetOverride.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
381. MeasureReport.group:reservedBudgetOverride.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
383. MeasureReport.group:reservedBudgetOverride.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this state
Control0..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
385. MeasureReport.group:reservedBudgetOverride.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
387. MeasureReport.group:reservedBudgetOverride.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
389. MeasureReport.group:reservedBudgetOverride.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
391. MeasureReport.group:reservedBudgetOverride.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
393. MeasureReport.group:reservedBudgetOverride.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
395. MeasureReport.group:reservedBudgetOverride.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
397. MeasureReport.group:reservedBudgetOverride.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
399. MeasureReport.group:reservedBudgetOverride.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
401. MeasureReport.group:reservedBudgetOverride.stratifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
403. MeasureReport.group:reservedBudgetOverride.stratifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
405. MeasureReport.group:reservedBudgetOverride.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
407. MeasureReport.group:reservedBudgetOverride.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
409. MeasureReport.group:reservedBudgetOverride.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
411. MeasureReport.group:reservedBudgetOverride.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
413. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
415. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
417. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
419. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..1
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
421. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
423. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
425. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
427. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
429. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
431. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
433. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
435. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
437. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
439. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
441. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
443. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
445. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
447. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.count
Definition

The number of members of the population in this stratum.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
449. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population in this stratum.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
451. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
453. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
455. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control0..1
TypeChoice of: Quantity, dateTime, CodeableConcept, Period, Range, Duration
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
457. MeasureReport.group:claimed
Slice Nameclaimed
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control1..1
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
459. MeasureReport.group:claimed.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
461. MeasureReport.group:claimed.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
463. MeasureReport.group:claimed.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
465. MeasureReport.group:claimed.linkId
Definition

The group from the Measure that corresponds to this group in the MeasureReport resource.

ShortPointer to specific group from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
467. MeasureReport.group:claimed.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "claimed"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="claimed"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
469. MeasureReport.group:claimed.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..1
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
471. MeasureReport.group:claimed.population
Definition

The populations that make up the population group, one for each type of population appropriate for the measure.

ShortThe populations in the group
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
473. MeasureReport.group:claimed.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
475. MeasureReport.group:claimed.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
477. MeasureReport.group:claimed.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
479. MeasureReport.group:claimed.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
481. MeasureReport.group:claimed.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
483. MeasureReport.group:claimed.population.count
Definition

The number of members of the population.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
485. MeasureReport.group:claimed.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
487. MeasureReport.group:claimed.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
489. MeasureReport.group:claimed.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
491. MeasureReport.group:claimed.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this state
Control0..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
493. MeasureReport.group:claimed.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
495. MeasureReport.group:claimed.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
497. MeasureReport.group:claimed.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
499. MeasureReport.group:claimed.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
501. MeasureReport.group:claimed.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
503. MeasureReport.group:claimed.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
505. MeasureReport.group:claimed.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
507. MeasureReport.group:claimed.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
509. MeasureReport.group:claimed.stratifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
511. MeasureReport.group:claimed.stratifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
513. MeasureReport.group:claimed.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
515. MeasureReport.group:claimed.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
517. MeasureReport.group:claimed.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
519. MeasureReport.group:claimed.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
521. MeasureReport.group:claimed.stratifier.stratum.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
523. MeasureReport.group:claimed.stratifier.stratum.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
525. MeasureReport.group:claimed.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
527. MeasureReport.group:claimed.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..1
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
529. MeasureReport.group:claimed.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
531. MeasureReport.group:claimed.stratifier.stratum.component.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
533. MeasureReport.group:claimed.stratifier.stratum.component.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
535. MeasureReport.group:claimed.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
537. MeasureReport.group:claimed.stratifier.stratum.component.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
539. MeasureReport.group:claimed.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
541. MeasureReport.group:claimed.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
543. MeasureReport.group:claimed.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
545. MeasureReport.group:claimed.stratifier.stratum.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
547. MeasureReport.group:claimed.stratifier.stratum.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
549. MeasureReport.group:claimed.stratifier.stratum.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
551. MeasureReport.group:claimed.stratifier.stratum.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
553. MeasureReport.group:claimed.stratifier.stratum.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
555. MeasureReport.group:claimed.stratifier.stratum.population.count
Definition

The number of members of the population in this stratum.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
557. MeasureReport.group:claimed.stratifier.stratum.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population in this stratum.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
559. MeasureReport.group:claimed.stratifier.stratum.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
561. MeasureReport.group:claimed.stratifier.stratum.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
563. MeasureReport.group:claimed.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control0..1
TypeChoice of: Quantity, dateTime, CodeableConcept, Period, Range, Duration
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
565. MeasureReport.group:payable
Slice Namepayable
Definition

The results of the calculation, one for each population group in the measure.

ShortMeasure results for each group
Control1..1
This element is affected by the following invariants: mrp-2, mrp-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
567. MeasureReport.group:payable.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
569. MeasureReport.group:payable.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
571. MeasureReport.group:payable.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
573. MeasureReport.group:payable.linkId
Definition

The group from the Measure that corresponds to this group in the MeasureReport resource.

ShortPointer to specific group from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
575. MeasureReport.group:payable.code
Definition

The meaning of the population group as defined in the measure definition.

ShortMeaning of the group
Control0..1
BindingFor example codes, see MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Pattern Value
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "payable"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="payable"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
577. MeasureReport.group:payable.subject
Definition

Optional subject identifying the individual or individuals the report is for.

ShortWhat individual(s) the report is for
Control0..1
TypeReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
579. MeasureReport.group:payable.population
Definition

The populations that make up the population group, one for each type of population appropriate for the measure.

ShortThe populations in the group
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
581. MeasureReport.group:payable.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
583. MeasureReport.group:payable.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
585. MeasureReport.group:payable.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
587. MeasureReport.group:payable.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
589. MeasureReport.group:payable.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
591. MeasureReport.group:payable.population.count
Definition

The number of members of the population.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
593. MeasureReport.group:payable.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
595. MeasureReport.group:payable.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
597. MeasureReport.group:payable.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
599. MeasureReport.group:payable.measureScore[x]
Definition

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

ShortAmount in UZS; absent when the program or the organization does not have this state
Control0..1
TypeQuantity
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
601. MeasureReport.group:payable.measureScore[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
603. MeasureReport.group:payable.measureScore[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MeasureReport.group.measureScore[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
605. MeasureReport.group:payable.measureScore[x].value
Definition

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

ShortNumerical value (with implicit precision)
Comments

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
607. MeasureReport.group:payable.measureScore[x].comparator
Definition

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > | ad - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if MissingIf there is no comparator, then there is no modification of the value
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
609. MeasureReport.group:payable.measureScore[x].unit
Definition

A human-readable form of the unit.

ShortUnit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
611. MeasureReport.group:payable.measureScore[x].system
Definition

The identification of the system that provides the coded form of the unit.

ShortSystem that defines coded unit form
Control1..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know the system that defines the coded form of the unit.

Pattern Value
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
613. MeasureReport.group:payable.measureScore[x].code
Definition

A computer processable form of the unit in some unit representation system.

ShortCoded form of the unit
Comments

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control1..1
This element is affected by the following invariants: qty-3
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Pattern Value
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
615. MeasureReport.group:payable.stratifier
Definition

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

ShortStratification results
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
617. MeasureReport.group:payable.stratifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
619. MeasureReport.group:payable.stratifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
621. MeasureReport.group:payable.stratifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
623. MeasureReport.group:payable.stratifier.linkId
Definition

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

ShortPointer to specific stratifier from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
625. MeasureReport.group:payable.stratifier.code
Definition

The meaning of this stratifier, as defined in the measure definition.

ShortWhat stratifier of the group
Control0..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
627. MeasureReport.group:payable.stratifier.stratum
Definition

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

ShortStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
629. MeasureReport.group:payable.stratifier.stratum.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
631. MeasureReport.group:payable.stratifier.stratum.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
633. MeasureReport.group:payable.stratifier.stratum.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
635. MeasureReport.group:payable.stratifier.stratum.value[x]
Definition

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

ShortThe stratum value, e.g. male
Control0..1
This element is affected by the following invariants: mrp-2
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
637. MeasureReport.group:payable.stratifier.stratum.component
Definition

A stratifier component value.

ShortStratifier component values
Control0..*
This element is affected by the following invariants: mrp-2
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
639. MeasureReport.group:payable.stratifier.stratum.component.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
641. MeasureReport.group:payable.stratifier.stratum.component.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
643. MeasureReport.group:payable.stratifier.stratum.component.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
645. MeasureReport.group:payable.stratifier.stratum.component.linkId
Definition

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

ShortPointer to specific stratifier component from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
647. MeasureReport.group:payable.stratifier.stratum.component.code
Definition

The code for the stratum component value.

ShortWhat stratifier component of the group
Control1..1
BindingFor example codes, see MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
649. MeasureReport.group:payable.stratifier.stratum.component.value[x]
Definition

The stratum component value.

ShortThe stratum component value, e.g. male
Control1..1
BindingFor example codes, see MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
651. MeasureReport.group:payable.stratifier.stratum.population
Definition

The populations that make up the stratum, one for each type of population appropriate to the measure.

ShortPopulation results in this stratum
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
653. MeasureReport.group:payable.stratifier.stratum.population.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
655. MeasureReport.group:payable.stratifier.stratum.population.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
657. MeasureReport.group:payable.stratifier.stratum.population.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
659. MeasureReport.group:payable.stratifier.stratum.population.linkId
Definition

The population from the Measure that corresponds to this population in the MeasureReport resource.

ShortPointer to specific population from Measure
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
661. MeasureReport.group:payable.stratifier.stratum.population.code
Definition

The type of the population.

Shortinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Control0..1
BindingUnless not suitable, these codes SHALL be taken from MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
663. MeasureReport.group:payable.stratifier.stratum.population.count
Definition

The number of members of the population in this stratum.

ShortSize of the population
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
665. MeasureReport.group:payable.stratifier.stratum.population.subjectResults
Definition

This element refers to a List of individual level MeasureReport resources, one for each subject in this population in this stratum.

ShortFor subject-list reports, the subject results in this population
Control0..1
TypeReference(List)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
667. MeasureReport.group:payable.stratifier.stratum.population.subjectReport
Definition

A reference to an individual level MeasureReport resource for a member of the population.

ShortFor subject-list reports, a subject result in this population
Comments

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Control0..*
TypeReference(MeasureReport)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
669. MeasureReport.group:payable.stratifier.stratum.population.subjects
Definition

Optional Group identifying the individuals that make up the population.

ShortWhat individual(s) in the population
Comments

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group SHALL be an actual (as opposed to a definitional) group.

Control0..1
TypeReference(Group)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
671. MeasureReport.group:payable.stratifier.stratum.measureScore[x]
Definition

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

ShortWhat score this stratum achieved
Control0..1
TypeChoice of: Quantity, dateTime, CodeableConcept, Period, Range, Duration
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
673. MeasureReport.supplementalData
Definition

A reference to a Resource that represents additional information collected for the report. If the value of the supplemental data is not a Resource (i.e. evaluating the supplementalData expression for this case in the measure results in a value that is not a FHIR Resource), it is reported as a reference to a contained Observation resource.

ShortAdditional information collected for the report
Comments

For individual measure reports, the supplementalData elements represent the direct result of evaluating the supplementalData expression for the subject of the report. For summary reports, supplementalData is reported as references to contained Observation resources that represent the number of times each value appeared as a supplementalData result for members of the population.

Control0..*
TypeReference(Resource)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
675. MeasureReport.evaluatedResource
Definition

Evaluated resources are used to capture what data was involved in the calculation of a measure. This usage is only allowed for individual reports to ensure that the size of the MeasureReport resource is bounded.

ShortWhat data was used to calculate the measure score
Comments

Evaluated resources are only reported for individual reports.

Control0..*
TypeReference(Resource)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))