Uzbekistan State Health Insurance Fund Core
0.9.0 - ci-build Uzbekistan bayroqcha

Uzbekistan State Health Insurance Fund Core — FHIR (HL7® FHIR® Standard) Build Tools tomonidan yaratilgan mahalliy ishlab chiqish yig‘masi (v0.9.0). Nashr etilgan versiyalar katalogini ko‘ring

Resurss profili: SHIF Program Budget Report by Organization - Batafsil ta’riflar

Draft 2026-11-20 holatiga ko‘ra

shif-program-budget-by-organization-report resurss profili uchun ta’riflar

Ushbu jadval mazmunini qanday talqin qilish bo‘yicha ko‘rsatmalarni bu yerdan topish mumkin bu yerda on how to interpret the contents of this table

0. MeasureReport
Ta'rif

The MeasureReport resource contains the results of the calculation of a measure; and optionally a reference to the resources involved in that calculation.

Qisqa tavsifResults of a measure evaluation
Boshqaruv0..*
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlardom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
mrp-1: Measure Reports used for data collection SHALL NOT communicate group and score information ((type != 'data-exchange') or group.exists().not())
mrp-2: Stratifiers SHALL be either a single criteria or a set of criteria components (group.stratifier.stratum.all(value.exists() xor component.exists()))
shif-budget-by-organization-measure: The report is for the measure shif-program-budget-by-organization. (measure = 'https://ig.shif.uz/core/Measure/shif-program-budget-by-organization' or measure.startsWith('https://ig.shif.uz/core/Measure/shif-program-budget-by-organization|'))
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
mrp-1: Measure Reports used for data collection SHALL NOT communicate group and score information ((type != 'data-exchange') or group.exists().not())
mrp-2: Stratifiers SHALL be either a single criteria or a set of criteria components (group.stratifier.stratum.all(value.exists() xor component.exists()))
2. MeasureReport.implicitRules
Ta'rif

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Qisqa tavsifA set of rules under which this content was created
Izohlar

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Boshqaruv0..1
Turiuri
Modifikator hisoblanaditrue sababi This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. MeasureReport.contained
Ta'rif

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

Qisqa tavsifContained, inline Resources
Izohlar

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: dom-2, dom-4, dom-3, dom-5
TuriResource
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Muqobil nomlarinline resources, anonymous resources, contained resources
6. MeasureReport.extension
Ta'rif

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifExtensionAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv10..*
TuriExtension
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingUshbu element quyidagi slices to‘plamini belgilaydi MeasureReport.extension. Slices quyidagicha: Tartibsiz va Open, va quyidagi diskriminatorlar yordamida farqlanishi mumkin:
  • value @ url
8. MeasureReport.extension:program
Slice nomiprogram
Ta'rif

Program of the State Health Insurance Fund. On a report, the program the report is for: one report covers one program, and the program is data, so the profiles and measures are shared by all programs. On a referral or a prescription, the program the request is issued under: the medical data carry the program, the information system sets it before the request is submitted to the Fund, and the Fund checks at intake that it equals Claim.subType of the claim based on the request.

Qisqa tavsifSHIF Program
Boshqaruv1..1
TuriExtension(SHIF Program) (Kengaytma turi: CodeableConcept)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. MeasureReport.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. MeasureReport.status
Ta'rif

The MeasureReport status. No data will be available until the MeasureReport status is complete.

Qisqa tavsifA snapshot is complete when published and never changescomplete | pending | error
Izohlar

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Boshqaruv1..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART MeasureReportStatushttp://hl7.org/fhir/ValueSet/measure-report-status|5.0.0
(required to http://hl7.org/fhir/ValueSet/measure-report-status|5.0.0)

The status of the measure report (e.g. complete, pending, or error)

Turicode
Modifikator hisoblanaditrue sababi This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Andoza qiymat
{
  "status" : "complete"
}
<status value="complete"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. MeasureReport.type
Ta'rif

The type of measure report. This may be an individual report, which provides the score for the measure for an individual member of the population; a subject-listing, which returns the list of members that meet the various criteria in the measure; a summary report, which returns a population count for each of the criteria in the measure; or a data-collection, which enables the MeasureReport to be used to exchange the data-of-interest for a quality measure.

Qisqa tavsifindividual | subject-list | summary | data-exchange
Izohlar

Data-exchange reports are used only to communicate data-of-interest for a measure. They do not necessarily include all the data for a particular subject or population, but they may.

Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: mrp-1
BogʻlanishKodlar quyidagi manbadan olinishi SHART MeasureReportTypehttp://hl7.org/fhir/ValueSet/measure-report-type|5.0.0
(required to http://hl7.org/fhir/ValueSet/measure-report-type|5.0.0)

The type of the measure report: individual, patient listing, or summary

Turicode
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Andoza qiymat
{
  "type" : "summary"
}
<type value="summary"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. MeasureReport.dataUpdateType
Ta'rif

Indicates whether the data submitted in a data-exchange report represents a snapshot or incremental update. A snapshot update replaces all previously submitted data for the receiver, whereas an incremental update represents only updated and/or changed data and should be applied as a differential update to the existing submitted data for the receiver.

Qisqa tavsifincremental | snapshot
Izohlar

This element only applies to Data-collection reports used to communicate the data-of-interest for a measure

Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART SubmitDataUpdateTypehttp://hl7.org/fhir/ValueSet/submit-data-update-type|5.0.0
(required to http://hl7.org/fhir/ValueSet/submit-data-update-type|5.0.0)
Turicode
Modifikator hisoblanaditrue sababi This element determines whether the data in a data-exchange measure report is a snapshot or incremental update and is required in order to correctly apply the data update to a receiving system
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Talablar

Allows receiving systems to support incremental exchange of data, reducing overall bandwidth requirements.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. MeasureReport.measure
Ta'rif

A reference to the Measure that was calculated to produce this report.

Qisqa tavsifhttps://ig.shif.uz/core/Measure/shif-program-budget-by-organizationWhat measure was calculated
Boshqaruv10..1
Turicanonical(Measure)
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. MeasureReport.subject
Ta'rif

Optional subject identifying the individual or individuals the report is for.

Qisqa tavsifHealthcare organization, by its tax number (INN); no internal identifiersWhat individual(s) the report is for
Boshqaruv10..1
TuriReference(SHIF Organization, CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. MeasureReport.subject.reference
Ta'rif

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Qisqa tavsifLiteral reference, Relative, internal or absolute URL
Izohlar

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

Boshqaruv0..01
Ushbu element quyidagi invariantlar ta’sirida: ref-2, ref-1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. MeasureReport.subject.identifier
Ta'rif

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

Qisqa tavsifLogical reference, when literal reference is not known
Izohlar

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

This element only allows for a single identifier. In the case where additional identifers are required, use the http://hl7.org/fhir/StructureDefinition/additionalIdentifier extension.

IzohBu biznes identifikatori, resurs identifikatori emas (qarang muhokama)
Boshqaruv10..1
Ushbu element quyidagi invariantlar ta’sirida: ref-2
TuriIdentifier
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. MeasureReport.subject.identifier.use
Ta'rif

The purpose of this identifier.

Qisqa tavsifusual | official | temp | secondary | old (If known)
Izohlar

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|5.0.0
(required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0)

Identifies the purpose for this identifier, if known .

Turicode
Modifikator hisoblanaditrue sababi This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. MeasureReport.subject.identifier.system
Ta'rif

Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

Qisqa tavsifThe namespace for the identifier value
Izohlar

Identifier.system is always case sensitive.

Boshqaruv10..1
Turiuri
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Andoza qiymat
{
  "system" : "https://dhp.uz/fhir/core/sid/org/uz/soliq"
}
<system value="https://dhp.uz/fhir/core/sid/org/uz/soliq"/>
MisolGeneral: http://www.acme.com/identifiers/patient
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. MeasureReport.subject.identifier.value
Ta'rif

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

Qisqa tavsifThe value that is unique
Izohlar

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Boshqaruv10..1
Ushbu element quyidagi invariantlar ta’sirida: ident-1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
MisolGeneral: 123456
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. MeasureReport.date
Ta'rif

The date this measure was calculated.

Qisqa tavsifMoment of the snapshot: 00:20 Tashkent time (UTC+5) of the snapshot dateWhen the measure was calculated
Boshqaruv10..1
TuridateTime
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. MeasureReport.period
Ta'rif

The reporting period for which the report was calculated.

Qisqa tavsifFiscal year of the program budgetWhat period the report covers
Boshqaruv1..1
TuriPeriod
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. MeasureReport.scoring
Ta'rif

Indicates how the calculation is performed for the measure, including proportion, ratio, continuous-variable, and cohort. The value set is extensible, allowing additional measure scoring types to be represented. It is expected to be the same as the scoring element on the referenced Measure.

Qisqa tavsifWhat scoring method (e.g. proportion, ratio, continuous-variable)
Boshqaruv0..1
BogʻlanishMos kelmaydigan hollar bundan mustasno, ushbu kodlar majburiy ravishda quyidagidan olinadi MeasureScoring (2.0.0)http://terminology.hl7.org/ValueSet/measure-scoring
(extensible to http://terminology.hl7.org/ValueSet/measure-scoring|2.0.0)
TuriCodeableConcept
Modifikator hisoblanaditrue sababi Scoring determines what method was used to calculate the measure score and is required for correct interpretation of the score
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. MeasureReport.improvementNotation
Ta'rif

Whether improvement in the measure is noted by an increase or decrease in the measure score.

Qisqa tavsifincrease | decrease
Izohlar

This element is typically defined by the measure, but reproduced here to ensure the measure score can be interpreted. The element is labeled as a modifier because it changes the interpretation of the reported measure score. Note also that a MeasureReport instance includes the improvementNotation as defined by the Measure being reported. It is duplicated in the MeasureReport because it is a critical aspect of interpreting the measure score but it is not intended to reflect whether the measure report is an increase or decrease. It helps interpret if the measure score is an increase or decrease, I.e., moving in the direction of the desired outcome.

Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART MeasureImprovementNotationhttp://hl7.org/fhir/ValueSet/measure-improvement-notation|5.0.0
(required to http://hl7.org/fhir/ValueSet/measure-improvement-notation|5.0.0)

The improvement notation of the measure report (e.g. increase or decrease)

TuriCodeableConcept
Modifikator hisoblanaditrue sababi Improvement notation determines how to interpret the measure score (i.e. whether an increase is an improvement)
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. MeasureReport.group
Ta'rif

The results of the calculation, one for each population group in the measure.

Qisqa tavsifMeasure results for each group
Boshqaruv50..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2, mrp-1
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingUshbu element quyidagi slices to‘plamini belgilaydi MeasureReport.group. Slices quyidagicha: Tartibsiz va Closed, va quyidagi diskriminatorlar yordamida farqlanishi mumkin:
  • value @ code

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

42. MeasureReport.group.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
44. MeasureReport.group.code
Ta'rif

The meaning of the population group as defined in the measure definition.

Qisqa tavsifMeaning of the group
Boshqaruv10..1
BogʻlanishKodlar misoli uchun qarang MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. MeasureReport.group.subject
Ta'rif

Optional subject identifying the individual or individuals the report is for.

Qisqa tavsifWhat individual(s) the report is for
Boshqaruv0..01
TuriReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. MeasureReport.group.population
Ta'rif

The populations that make up the population group, one for each type of population appropriate for the measure.

Qisqa tavsifThe populations in the group
Boshqaruv0..0*
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
51. MeasureReport.group.stratifier
Ta'rif

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

Qisqa tavsifStratification results
Boshqaruv0..0*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. MeasureReport.group:availableOwnBudget
Slice nomiavailableOwnBudget
Ta'rif

The results of the calculation, one for each population group in the measure.

Qisqa tavsifHas an amount only for an organization with an own budget it is currently admitted to reserve from; without an amount otherwise, not zeroMeasure results for each group
Boshqaruv10..1*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2, mrp-1
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. MeasureReport.group:availableOwnBudget.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
58. MeasureReport.group:availableOwnBudget.code
Ta'rif

The meaning of the population group as defined in the measure definition.

Qisqa tavsifMeaning of the group
Boshqaruv0..1
BogʻlanishKodlar misoli uchun qarang MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Andoza qiymat
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "available-own-budget"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="available-own-budget"/>
  </coding>
</code>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. MeasureReport.group:availableOwnBudget.measureScore[x]
Ta'rif

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

Qisqa tavsifAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Boshqaruv0..1
TuriQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. MeasureReport.group:availableOwnBudget.measureScore[x].value
Ta'rif

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

Qisqa tavsifNumerical value (with implicit precision)
Izohlar

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Boshqaruv10..1
Turidecimal
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Precision is handled implicitly in almost all cases of measurement.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. MeasureReport.group:availableOwnBudget.measureScore[x].comparator
Ta'rif

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Qisqa tavsif< | <= | >= | > | ad - how to understand the value
Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Turicode
Modifikator hisoblanaditrue sababi This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Mavjud bo‘lmaganda ma’nosiIf there is no comparator, then there is no modification of the value
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. MeasureReport.group:availableOwnBudget.measureScore[x].system
Ta'rif

The identification of the system that provides the coded form of the unit.

Qisqa tavsifSystem that defines coded unit form
Boshqaruv10..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turiuri
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need to know the system that defines the coded form of the unit.

Andoza qiymat
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. MeasureReport.group:availableOwnBudget.measureScore[x].code
Ta'rif

A computer processable form of the unit in some unit representation system.

Qisqa tavsifCoded form of the unit
Izohlar

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Boshqaruv10..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turicode
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Andoza qiymat
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. MeasureReport.group:reserved
Slice nomireserved
Ta'rif

The results of the calculation, one for each population group in the measure.

Qisqa tavsifMeasure results for each group
Boshqaruv10..1*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2, mrp-1
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. MeasureReport.group:reserved.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
74. MeasureReport.group:reserved.code
Ta'rif

The meaning of the population group as defined in the measure definition.

Qisqa tavsifMeaning of the group
Boshqaruv0..1
BogʻlanishKodlar misoli uchun qarang MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Andoza qiymat
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved"/>
  </coding>
</code>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. MeasureReport.group:reserved.measureScore[x]
Ta'rif

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

Qisqa tavsifAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Boshqaruv0..1
TuriQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. MeasureReport.group:reserved.measureScore[x].value
Ta'rif

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

Qisqa tavsifNumerical value (with implicit precision)
Izohlar

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Boshqaruv10..1
Turidecimal
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Precision is handled implicitly in almost all cases of measurement.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
80. MeasureReport.group:reserved.measureScore[x].comparator
Ta'rif

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Qisqa tavsif< | <= | >= | > | ad - how to understand the value
Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Turicode
Modifikator hisoblanaditrue sababi This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Mavjud bo‘lmaganda ma’nosiIf there is no comparator, then there is no modification of the value
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. MeasureReport.group:reserved.measureScore[x].system
Ta'rif

The identification of the system that provides the coded form of the unit.

Qisqa tavsifSystem that defines coded unit form
Boshqaruv10..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turiuri
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need to know the system that defines the coded form of the unit.

Andoza qiymat
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. MeasureReport.group:reserved.measureScore[x].code
Ta'rif

A computer processable form of the unit in some unit representation system.

Qisqa tavsifCoded form of the unit
Izohlar

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Boshqaruv10..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turicode
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Andoza qiymat
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. MeasureReport.group:reservedBudgetOverride
Slice nomireservedBudgetOverride
Ta'rif

The results of the calculation, one for each population group in the measure.

Qisqa tavsifMeasure results for each group
Boshqaruv10..1*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2, mrp-1
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. MeasureReport.group:reservedBudgetOverride.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
90. MeasureReport.group:reservedBudgetOverride.code
Ta'rif

The meaning of the population group as defined in the measure definition.

Qisqa tavsifMeaning of the group
Boshqaruv0..1
BogʻlanishKodlar misoli uchun qarang MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Andoza qiymat
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved-budget-override"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved-budget-override"/>
  </coding>
</code>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. MeasureReport.group:reservedBudgetOverride.measureScore[x]
Ta'rif

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

Qisqa tavsifAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Boshqaruv0..1
TuriQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. MeasureReport.group:reservedBudgetOverride.measureScore[x].value
Ta'rif

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

Qisqa tavsifNumerical value (with implicit precision)
Izohlar

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Boshqaruv10..1
Turidecimal
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Precision is handled implicitly in almost all cases of measurement.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. MeasureReport.group:reservedBudgetOverride.measureScore[x].comparator
Ta'rif

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Qisqa tavsif< | <= | >= | > | ad - how to understand the value
Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Turicode
Modifikator hisoblanaditrue sababi This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Mavjud bo‘lmaganda ma’nosiIf there is no comparator, then there is no modification of the value
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
98. MeasureReport.group:reservedBudgetOverride.measureScore[x].system
Ta'rif

The identification of the system that provides the coded form of the unit.

Qisqa tavsifSystem that defines coded unit form
Boshqaruv10..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turiuri
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need to know the system that defines the coded form of the unit.

Andoza qiymat
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. MeasureReport.group:reservedBudgetOverride.measureScore[x].code
Ta'rif

A computer processable form of the unit in some unit representation system.

Qisqa tavsifCoded form of the unit
Izohlar

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Boshqaruv10..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turicode
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Andoza qiymat
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. MeasureReport.group:claimed
Slice nomiclaimed
Ta'rif

The results of the calculation, one for each population group in the measure.

Qisqa tavsifMeasure results for each group
Boshqaruv10..1*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2, mrp-1
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. MeasureReport.group:claimed.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
106. MeasureReport.group:claimed.code
Ta'rif

The meaning of the population group as defined in the measure definition.

Qisqa tavsifMeaning of the group
Boshqaruv0..1
BogʻlanishKodlar misoli uchun qarang MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Andoza qiymat
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "claimed"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="claimed"/>
  </coding>
</code>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
108. MeasureReport.group:claimed.measureScore[x]
Ta'rif

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

Qisqa tavsifAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Boshqaruv0..1
TuriQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
110. MeasureReport.group:claimed.measureScore[x].value
Ta'rif

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

Qisqa tavsifNumerical value (with implicit precision)
Izohlar

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Boshqaruv10..1
Turidecimal
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Precision is handled implicitly in almost all cases of measurement.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
112. MeasureReport.group:claimed.measureScore[x].comparator
Ta'rif

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Qisqa tavsif< | <= | >= | > | ad - how to understand the value
Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Turicode
Modifikator hisoblanaditrue sababi This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Mavjud bo‘lmaganda ma’nosiIf there is no comparator, then there is no modification of the value
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
114. MeasureReport.group:claimed.measureScore[x].system
Ta'rif

The identification of the system that provides the coded form of the unit.

Qisqa tavsifSystem that defines coded unit form
Boshqaruv10..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turiuri
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need to know the system that defines the coded form of the unit.

Andoza qiymat
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
116. MeasureReport.group:claimed.measureScore[x].code
Ta'rif

A computer processable form of the unit in some unit representation system.

Qisqa tavsifCoded form of the unit
Izohlar

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Boshqaruv10..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turicode
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Andoza qiymat
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
118. MeasureReport.group:payable
Slice nomipayable
Ta'rif

The results of the calculation, one for each population group in the measure.

Qisqa tavsifMeasure results for each group
Boshqaruv10..1*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2, mrp-1
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
120. MeasureReport.group:payable.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
122. MeasureReport.group:payable.code
Ta'rif

The meaning of the population group as defined in the measure definition.

Qisqa tavsifMeaning of the group
Boshqaruv0..1
BogʻlanishKodlar misoli uchun qarang MeasureGroupExamplehttp://hl7.org/fhir/ValueSet/measure-group-example|5.0.0
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Andoza qiymat
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "payable"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="payable"/>
  </coding>
</code>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
124. MeasureReport.group:payable.measureScore[x]
Ta'rif

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

Qisqa tavsifAmount in UZS; absent when the program or the organization does not have this stateWhat score this group achieved
Boshqaruv0..1
TuriQuantity, dateTime, Period, Duration, Range, CodeableConcept
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
126. MeasureReport.group:payable.measureScore[x].value
Ta'rif

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

Qisqa tavsifNumerical value (with implicit precision)
Izohlar

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Boshqaruv10..1
Turidecimal
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Precision is handled implicitly in almost all cases of measurement.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
128. MeasureReport.group:payable.measureScore[x].comparator
Ta'rif

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Qisqa tavsif< | <= | >= | > | ad - how to understand the value
Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Turicode
Modifikator hisoblanaditrue sababi This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Mavjud bo‘lmaganda ma’nosiIf there is no comparator, then there is no modification of the value
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
130. MeasureReport.group:payable.measureScore[x].system
Ta'rif

The identification of the system that provides the coded form of the unit.

Qisqa tavsifSystem that defines coded unit form
Boshqaruv10..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turiuri
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need to know the system that defines the coded form of the unit.

Andoza qiymat
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
132. MeasureReport.group:payable.measureScore[x].code
Ta'rif

A computer processable form of the unit in some unit representation system.

Qisqa tavsifCoded form of the unit
Izohlar

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Boshqaruv10..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turicode
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Andoza qiymat
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Ushbu jadval mazmunini qanday talqin qilish bo‘yicha ko‘rsatmalarni bu yerdan topish mumkin bu yerda on how to interpret the contents of this table

0. MeasureReport
Invariantlarshif-budget-by-organization-measure: The report is for the measure shif-program-budget-by-organization. (measure = 'https://ig.shif.uz/core/Measure/shif-program-budget-by-organization' or measure.startsWith('https://ig.shif.uz/core/Measure/shif-program-budget-by-organization|'))
2. MeasureReport.extension
Boshqaruv1..?
SlicingUshbu element quyidagi slices to‘plamini belgilaydi MeasureReport.extension. Slices quyidagicha: Tartibsiz va Open, va quyidagi diskriminatorlar yordamida farqlanishi mumkin:
  • value @ url
4. MeasureReport.extension:program
Slice nomiprogram
Boshqaruv1..1
TuriExtension(SHIF Program) (Kengaytma turi: CodeableConcept)
Majburiy qo‘llab-quvvatlashtrue
6. MeasureReport.status
Qisqa tavsifA snapshot is complete when published and never changes
Andoza qiymat
{
  "status" : "complete"
}
<status value="complete"/>
8. MeasureReport.type
Andoza qiymat
{
  "type" : "summary"
}
<type value="summary"/>
10. MeasureReport.measure
Qisqa tavsifhttps://ig.shif.uz/core/Measure/shif-program-budget-by-organization
Boshqaruv1..?
Majburiy qo‘llab-quvvatlashtrue
12. MeasureReport.subject
Qisqa tavsifHealthcare organization, by its tax number (INN); no internal identifiers
Boshqaruv1..?
TuriReference(SHIF Organization)
Majburiy qo‘llab-quvvatlashtrue
14. MeasureReport.subject.reference
Boshqaruv0..0
16. MeasureReport.subject.identifier
IzohBu biznes identifikatori, resurs identifikatori emas (qarang muhokama)
Boshqaruv1..?
Majburiy qo‘llab-quvvatlashtrue
18. MeasureReport.subject.identifier.system
Boshqaruv1..?
Andoza qiymat
{
  "system" : "https://dhp.uz/fhir/core/sid/org/uz/soliq"
}
<system value="https://dhp.uz/fhir/core/sid/org/uz/soliq"/>
20. MeasureReport.subject.identifier.value
Boshqaruv1..?
22. MeasureReport.date
Qisqa tavsifMoment of the snapshot: 00:20 Tashkent time (UTC+5) of the snapshot date
Boshqaruv1..?
Majburiy qo‘llab-quvvatlashtrue
24. MeasureReport.period
Qisqa tavsifFiscal year of the program budget
Majburiy qo‘llab-quvvatlashtrue
26. MeasureReport.group
Boshqaruv5..?
Majburiy qo‘llab-quvvatlashtrue
SlicingUshbu element quyidagi slices to‘plamini belgilaydi MeasureReport.group. Slices quyidagicha: Tartibsiz va Closed, va quyidagi diskriminatorlar yordamida farqlanishi mumkin:
  • value @ code

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

28. MeasureReport.group.code
Boshqaruv1..?
30. MeasureReport.group.subject
Boshqaruv0..0
32. MeasureReport.group.population
Boshqaruv0..0
34. MeasureReport.group.stratifier
Boshqaruv0..0
36. MeasureReport.group:availableOwnBudget
Slice nomiavailableOwnBudget
Qisqa tavsifHas an amount only for an organization with an own budget it is currently admitted to reserve from; without an amount otherwise, not zero
Boshqaruv1..1
Majburiy qo‘llab-quvvatlashtrue
38. MeasureReport.group:availableOwnBudget.code
Andoza qiymat
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "available-own-budget"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="available-own-budget"/>
  </coding>
</code>
40. MeasureReport.group:availableOwnBudget.measureScore[x]
Qisqa tavsifAmount in UZS; absent when the program or the organization does not have this state
TuriQuantity
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Majburiy qo‘llab-quvvatlashtrue
42. MeasureReport.group:availableOwnBudget.measureScore[x].value
Boshqaruv1..?
44. MeasureReport.group:availableOwnBudget.measureScore[x].system
Boshqaruv1..?
Andoza qiymat
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
46. MeasureReport.group:availableOwnBudget.measureScore[x].code
Boshqaruv1..?
Andoza qiymat
{
  "code" : "UZS"
}
<code value="UZS"/>
48. MeasureReport.group:reserved
Slice nomireserved
Boshqaruv1..1
Majburiy qo‘llab-quvvatlashtrue
50. MeasureReport.group:reserved.code
Andoza qiymat
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved"/>
  </coding>
</code>
52. MeasureReport.group:reserved.measureScore[x]
Qisqa tavsifAmount in UZS; absent when the program or the organization does not have this state
TuriQuantity
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Majburiy qo‘llab-quvvatlashtrue
54. MeasureReport.group:reserved.measureScore[x].value
Boshqaruv1..?
56. MeasureReport.group:reserved.measureScore[x].system
Boshqaruv1..?
Andoza qiymat
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
58. MeasureReport.group:reserved.measureScore[x].code
Boshqaruv1..?
Andoza qiymat
{
  "code" : "UZS"
}
<code value="UZS"/>
60. MeasureReport.group:reservedBudgetOverride
Slice nomireservedBudgetOverride
Boshqaruv1..1
Majburiy qo‘llab-quvvatlashtrue
62. MeasureReport.group:reservedBudgetOverride.code
Andoza qiymat
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved-budget-override"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved-budget-override"/>
  </coding>
</code>
64. MeasureReport.group:reservedBudgetOverride.measureScore[x]
Qisqa tavsifAmount in UZS; absent when the program or the organization does not have this state
TuriQuantity
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Majburiy qo‘llab-quvvatlashtrue
66. MeasureReport.group:reservedBudgetOverride.measureScore[x].value
Boshqaruv1..?
68. MeasureReport.group:reservedBudgetOverride.measureScore[x].system
Boshqaruv1..?
Andoza qiymat
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
70. MeasureReport.group:reservedBudgetOverride.measureScore[x].code
Boshqaruv1..?
Andoza qiymat
{
  "code" : "UZS"
}
<code value="UZS"/>
72. MeasureReport.group:claimed
Slice nomiclaimed
Boshqaruv1..1
Majburiy qo‘llab-quvvatlashtrue
74. MeasureReport.group:claimed.code
Andoza qiymat
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "claimed"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="claimed"/>
  </coding>
</code>
76. MeasureReport.group:claimed.measureScore[x]
Qisqa tavsifAmount in UZS; absent when the program or the organization does not have this state
TuriQuantity
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Majburiy qo‘llab-quvvatlashtrue
78. MeasureReport.group:claimed.measureScore[x].value
Boshqaruv1..?
80. MeasureReport.group:claimed.measureScore[x].system
Boshqaruv1..?
Andoza qiymat
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
82. MeasureReport.group:claimed.measureScore[x].code
Boshqaruv1..?
Andoza qiymat
{
  "code" : "UZS"
}
<code value="UZS"/>
84. MeasureReport.group:payable
Slice nomipayable
Boshqaruv1..1
Majburiy qo‘llab-quvvatlashtrue
86. MeasureReport.group:payable.code
Andoza qiymat
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "payable"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="payable"/>
  </coding>
</code>
88. MeasureReport.group:payable.measureScore[x]
Qisqa tavsifAmount in UZS; absent when the program or the organization does not have this state
TuriQuantity
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Majburiy qo‘llab-quvvatlashtrue
90. MeasureReport.group:payable.measureScore[x].value
Boshqaruv1..?
92. MeasureReport.group:payable.measureScore[x].system
Boshqaruv1..?
Andoza qiymat
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
94. MeasureReport.group:payable.measureScore[x].code
Boshqaruv1..?
Andoza qiymat
{
  "code" : "UZS"
}
<code value="UZS"/>

Ushbu jadval mazmunini qanday talqin qilish bo‘yicha ko‘rsatmalarni bu yerdan topish mumkin bu yerda on how to interpret the contents of this table

0. MeasureReport
Ta'rif

The MeasureReport resource contains the results of the calculation of a measure; and optionally a reference to the resources involved in that calculation.

Qisqa tavsifResults of a measure evaluation
Boshqaruv0..*
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlardom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
mrp-1: Measure Reports used for data collection SHALL NOT communicate group and score information ((type != 'data-exchange') or group.exists().not())
mrp-2: Stratifiers SHALL be either a single criteria or a set of criteria components (group.stratifier.stratum.all(value.exists() xor component.exists()))
shif-budget-by-organization-measure: The report is for the measure shif-program-budget-by-organization. (measure = 'https://ig.shif.uz/core/Measure/shif-program-budget-by-organization' or measure.startsWith('https://ig.shif.uz/core/Measure/shif-program-budget-by-organization|'))
2. MeasureReport.id
Ta'rif

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Qisqa tavsifLogical id of this artifact
Izohlar

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

Boshqaruv0..1
Turiid
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
4. MeasureReport.meta
Ta'rif

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Qisqa tavsifMetadata about the resource
Boshqaruv0..1
TuriMeta
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. MeasureReport.implicitRules
Ta'rif

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Qisqa tavsifA set of rules under which this content was created
Izohlar

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Boshqaruv0..1
Turiuri
Modifikator hisoblanaditrue sababi This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. MeasureReport.language
Ta'rif

The base language in which the resource is written.

Qisqa tavsifLanguage of the resource content
Izohlar

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART AllLanguages
(required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

IETF language tag for a human language

Turicode
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. MeasureReport.text
Ta'rif

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Qisqa tavsifText summary of the resource, for human interpretation
Izohlar

Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: dom-6
TuriNarrative
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Muqobil nomlarnarrative, html, xhtml, display
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. MeasureReport.contained
Ta'rif

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

Qisqa tavsifContained, inline Resources
Izohlar

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: dom-2, dom-4, dom-3, dom-5
TuriResource
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Muqobil nomlarinline resources, anonymous resources, contained resources
14. MeasureReport.extension
Ta'rif

An Extension

Qisqa tavsifExtension
Boshqaruv1..*
TuriExtension
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingUshbu element quyidagi slices to‘plamini belgilaydi MeasureReport.extension. Slices quyidagicha: Tartibsiz va Open, va quyidagi diskriminatorlar yordamida farqlanishi mumkin:
  • value @ url
16. MeasureReport.extension:program
Slice nomiprogram
Ta'rif

Program of the State Health Insurance Fund. On a report, the program the report is for: one report covers one program, and the program is data, so the profiles and measures are shared by all programs. On a referral or a prescription, the program the request is issued under: the medical data carry the program, the information system sets it before the request is submitted to the Fund, and the Fund checks at intake that it equals Claim.subType of the claim based on the request.

Qisqa tavsifSHIF Program
Boshqaruv1..1
TuriExtension(SHIF Program) (Kengaytma turi: CodeableConcept)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. MeasureReport.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. MeasureReport.identifier
Ta'rif

A formal identifier that is used to identify this MeasureReport when it is represented in other formats or referenced in a specification, model, design or an instance.

Qisqa tavsifAdditional identifier for the MeasureReport
Izohlar

Typically, this is used for identifiers that can go in an HL7 V3 II data type - e.g. to identify this {{title}} outside of FHIR, where the logical URL is not possible to use.

IzohBu biznes identifikatori, resurs identifikatori emas (qarang muhokama)
Boshqaruv0..*
TuriIdentifier
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Talablar

Allows externally provided and/or usable business identifiers to be easily associated with the module.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. MeasureReport.status
Ta'rif

The MeasureReport status. No data will be available until the MeasureReport status is complete.

Qisqa tavsifA snapshot is complete when published and never changes
Izohlar

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Boshqaruv1..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART MeasureReportStatus
(required to http://hl7.org/fhir/ValueSet/measure-report-status|5.0.0)

The status of the measure report (e.g. complete, pending, or error)

Turicode
Modifikator hisoblanaditrue sababi This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Andoza qiymat
{
  "status" : "complete"
}
<status value="complete"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. MeasureReport.type
Ta'rif

The type of measure report. This may be an individual report, which provides the score for the measure for an individual member of the population; a subject-listing, which returns the list of members that meet the various criteria in the measure; a summary report, which returns a population count for each of the criteria in the measure; or a data-collection, which enables the MeasureReport to be used to exchange the data-of-interest for a quality measure.

Qisqa tavsifindividual | subject-list | summary | data-exchange
Izohlar

Data-exchange reports are used only to communicate data-of-interest for a measure. They do not necessarily include all the data for a particular subject or population, but they may.

Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: mrp-1
BogʻlanishKodlar quyidagi manbadan olinishi SHART MeasureReportType
(required to http://hl7.org/fhir/ValueSet/measure-report-type|5.0.0)

The type of the measure report: individual, patient listing, or summary

Turicode
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Andoza qiymat
{
  "type" : "summary"
}
<type value="summary"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. MeasureReport.dataUpdateType
Ta'rif

Indicates whether the data submitted in a data-exchange report represents a snapshot or incremental update. A snapshot update replaces all previously submitted data for the receiver, whereas an incremental update represents only updated and/or changed data and should be applied as a differential update to the existing submitted data for the receiver.

Qisqa tavsifincremental | snapshot
Izohlar

This element only applies to Data-collection reports used to communicate the data-of-interest for a measure

Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART SubmitDataUpdateType
(required to http://hl7.org/fhir/ValueSet/submit-data-update-type|5.0.0)
Turicode
Modifikator hisoblanaditrue sababi This element determines whether the data in a data-exchange measure report is a snapshot or incremental update and is required in order to correctly apply the data update to a receiving system
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Talablar

Allows receiving systems to support incremental exchange of data, reducing overall bandwidth requirements.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. MeasureReport.measure
Ta'rif

A reference to the Measure that was calculated to produce this report.

Qisqa tavsifhttps://ig.shif.uz/core/Measure/shif-program-budget-by-organization
Boshqaruv1..1
Turicanonical(Measure)
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. MeasureReport.subject
Ta'rif

Optional subject identifying the individual or individuals the report is for.

Qisqa tavsifHealthcare organization, by its tax number (INN); no internal identifiers
Boshqaruv1..1
TuriReference(SHIF Organization)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. MeasureReport.subject.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turiid
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
34. MeasureReport.subject.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingUshbu element quyidagi slices to‘plamini belgilaydi MeasureReport.subject.extension. Slices quyidagicha: Tartibsiz va Open, va quyidagi diskriminatorlar yordamida farqlanishi mumkin:
  • value @ url
36. MeasureReport.subject.reference
Ta'rif

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Qisqa tavsifLiteral reference, Relative, internal or absolute URL
Izohlar

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

Boshqaruv0..0
Ushbu element quyidagi invariantlar ta’sirida: ref-2, ref-1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. MeasureReport.subject.type
Ta'rif

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

Qisqa tavsifType the reference refers to (e.g. "Patient") - must be a resource in resources
Izohlar

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a known RESTful URL) or by resolving the target of the reference.

Boshqaruv0..1
BogʻlanishMos kelmaydigan hollar bundan mustasno, ushbu kodlar majburiy ravishda quyidagidan olinadi ResourceType
(extensible to http://hl7.org/fhir/ValueSet/resource-types|5.0.0)

Aa resource (or, for logical models, the URI of the logical model).

Turiuri
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. MeasureReport.subject.identifier
Ta'rif

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

Qisqa tavsifLogical reference, when literal reference is not known
Izohlar

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

This element only allows for a single identifier. In the case where additional identifers are required, use the http://hl7.org/fhir/StructureDefinition/additionalIdentifier extension.

IzohBu biznes identifikatori, resurs identifikatori emas (qarang muhokama)
Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: ref-2
TuriIdentifier
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. MeasureReport.subject.identifier.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turiid
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
44. MeasureReport.subject.identifier.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingUshbu element quyidagi slices to‘plamini belgilaydi MeasureReport.subject.identifier.extension. Slices quyidagicha: Tartibsiz va Open, va quyidagi diskriminatorlar yordamida farqlanishi mumkin:
  • value @ url
46. MeasureReport.subject.identifier.use
Ta'rif

The purpose of this identifier.

Qisqa tavsifusual | official | temp | secondary | old (If known)
Izohlar

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART IdentifierUse
(required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0)

Identifies the purpose for this identifier, if known .

Turicode
Modifikator hisoblanaditrue sababi This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. MeasureReport.subject.identifier.type
Ta'rif

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

Qisqa tavsifDescription of identifier
Izohlar

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Boshqaruv0..1
BogʻlanishMos kelmaydigan hollar bundan mustasno, ushbu kodlar majburiy ravishda quyidagidan olinadi IdentifierTypeCodes
(extensible to http://hl7.org/fhir/ValueSet/identifier-type|5.0.0)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TuriCodeableConcept
Modifikator hisoblanadifalse
Xulosatrue
Talablar

Allows users to make use of identifiers when the identifier system is not known.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. MeasureReport.subject.identifier.system
Ta'rif

Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

Qisqa tavsifThe namespace for the identifier value
Izohlar

Identifier.system is always case sensitive.

Boshqaruv1..1
Turiuri
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Andoza qiymat
{
  "system" : "https://dhp.uz/fhir/core/sid/org/uz/soliq"
}
<system value="https://dhp.uz/fhir/core/sid/org/uz/soliq"/>
MisolGeneral: http://www.acme.com/identifiers/patient
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. MeasureReport.subject.identifier.value
Ta'rif

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

Qisqa tavsifThe value that is unique
Izohlar

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: ident-1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
MisolGeneral: 123456
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. MeasureReport.subject.identifier.period
Ta'rif

Time period during which identifier is/was valid for use.

Qisqa tavsifTime period when id is/was valid for use
Boshqaruv0..1
TuriPeriod
Modifikator hisoblanadifalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. MeasureReport.subject.identifier.assigner
Ta'rif

Organization that issued/manages the identifier.

Qisqa tavsifOrganization that issued id (may be just text)
Izohlar

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Boshqaruv0..1
TuriReference(Organization)
Modifikator hisoblanadifalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. MeasureReport.subject.display
Ta'rif

Plain text narrative that identifies the resource in addition to the resource reference.

Qisqa tavsifText alternative for the resource
Izohlar

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ref-2
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. MeasureReport.date
Ta'rif

The date this measure was calculated.

Qisqa tavsifMoment of the snapshot: 00:20 Tashkent time (UTC+5) of the snapshot date
Boshqaruv1..1
TuridateTime
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. MeasureReport.reporter
Ta'rif

The individual or organization that is reporting the data.

Qisqa tavsifWho is reporting the data
Boshqaruv0..1
TuriReference(Practitioner, PractitionerRole, Organization, Group)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. MeasureReport.reportingVendor
Ta'rif

A reference to the vendor who queried the data, calculated results and/or generated the report. The ‘reporting vendor’ is intended to represent the submitting entity when it is not the same as the reporting entity. This extension is used when the Receiver is interested in getting vendor information in the report.

Qisqa tavsifWhat vendor prepared the data
Boshqaruv0..1
TuriReference(Organization)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. MeasureReport.location
Ta'rif

A reference to the location for which the data is being reported.

Qisqa tavsifWhere the reported data is from
Boshqaruv0..1
TuriReference(Location)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. MeasureReport.period
Ta'rif

The reporting period for which the report was calculated.

Qisqa tavsifFiscal year of the program budget
Boshqaruv1..1
TuriPeriod
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. MeasureReport.inputParameters
Ta'rif

A reference to a Parameters resource (typically represented using a contained resource) that represents any input parameters that were provided to the operation that generated the report.

Qisqa tavsifWhat parameters were provided to the report
Izohlar

Whenever an operation returns a MeasureReport, the IN parameters from that operation can be returned to the caller of the operation using MeasureReport.inputParameters. Operations include but are not limited to $evaluate-measure, $care-gaps, $data-requirements, and $collect-data. The inputParameters can also be used in a MeasureReport used to define a test case (i.e., not as a result of an operation).

Boshqaruv0..1
TuriReference(Parameters)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. MeasureReport.scoring
Ta'rif

Indicates how the calculation is performed for the measure, including proportion, ratio, continuous-variable, and cohort. The value set is extensible, allowing additional measure scoring types to be represented. It is expected to be the same as the scoring element on the referenced Measure.

Qisqa tavsifWhat scoring method (e.g. proportion, ratio, continuous-variable)
Boshqaruv0..1
BogʻlanishMos kelmaydigan hollar bundan mustasno, ushbu kodlar majburiy ravishda quyidagidan olinadi MeasureScoring (2.0.0)
(extensible to http://terminology.hl7.org/ValueSet/measure-scoring|2.0.0)
TuriCodeableConcept
Modifikator hisoblanaditrue sababi Scoring determines what method was used to calculate the measure score and is required for correct interpretation of the score
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. MeasureReport.improvementNotation
Ta'rif

Whether improvement in the measure is noted by an increase or decrease in the measure score.

Qisqa tavsifincrease | decrease
Izohlar

This element is typically defined by the measure, but reproduced here to ensure the measure score can be interpreted. The element is labeled as a modifier because it changes the interpretation of the reported measure score. Note also that a MeasureReport instance includes the improvementNotation as defined by the Measure being reported. It is duplicated in the MeasureReport because it is a critical aspect of interpreting the measure score but it is not intended to reflect whether the measure report is an increase or decrease. It helps interpret if the measure score is an increase or decrease, I.e., moving in the direction of the desired outcome.

Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART MeasureImprovementNotation
(required to http://hl7.org/fhir/ValueSet/measure-improvement-notation|5.0.0)

The improvement notation of the measure report (e.g. increase or decrease)

TuriCodeableConcept
Modifikator hisoblanaditrue sababi Improvement notation determines how to interpret the measure score (i.e. whether an increase is an improvement)
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. MeasureReport.group
Ta'rif

The results of the calculation, one for each population group in the measure.

Qisqa tavsifMeasure results for each group
Boshqaruv5..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2, mrp-1
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingUshbu element quyidagi slices to‘plamini belgilaydi MeasureReport.group. Slices quyidagicha: Tartibsiz va Closed, va quyidagi diskriminatorlar yordamida farqlanishi mumkin:
  • value @ code

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

78. MeasureReport.group.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
80. MeasureReport.group.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
82. MeasureReport.group.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
84. MeasureReport.group.linkId
Ta'rif

The group from the Measure that corresponds to this group in the MeasureReport resource.

Qisqa tavsifPointer to specific group from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. MeasureReport.group.code
Ta'rif

The meaning of the population group as defined in the measure definition.

Qisqa tavsifMeaning of the group
Boshqaruv1..1
BogʻlanishKodlar misoli uchun qarang MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. MeasureReport.group.subject
Ta'rif

Optional subject identifying the individual or individuals the report is for.

Qisqa tavsifWhat individual(s) the report is for
Boshqaruv0..0
TuriReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. MeasureReport.group.population
Ta'rif

The populations that make up the population group, one for each type of population appropriate for the measure.

Qisqa tavsifThe populations in the group
Boshqaruv0..0
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
101. MeasureReport.group.measureScore[x]
Ta'rif

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

Qisqa tavsifWhat score this group achieved
Boshqaruv0..1
TuriTanlov: Quantity, dateTime, CodeableConcept, Period, Range, Duration
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
103. MeasureReport.group.stratifier
Ta'rif

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

Qisqa tavsifStratification results
Boshqaruv0..0
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
133. MeasureReport.group:availableOwnBudget
Slice nomiavailableOwnBudget
Ta'rif

The results of the calculation, one for each population group in the measure.

Qisqa tavsifHas an amount only for an organization with an own budget it is currently admitted to reserve from; without an amount otherwise, not zero
Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: mrp-2, mrp-1
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
135. MeasureReport.group:availableOwnBudget.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
137. MeasureReport.group:availableOwnBudget.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
139. MeasureReport.group:availableOwnBudget.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
141. MeasureReport.group:availableOwnBudget.linkId
Ta'rif

The group from the Measure that corresponds to this group in the MeasureReport resource.

Qisqa tavsifPointer to specific group from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
143. MeasureReport.group:availableOwnBudget.code
Ta'rif

The meaning of the population group as defined in the measure definition.

Qisqa tavsifMeaning of the group
Boshqaruv0..1
BogʻlanishKodlar misoli uchun qarang MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Andoza qiymat
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "available-own-budget"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="available-own-budget"/>
  </coding>
</code>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
145. MeasureReport.group:availableOwnBudget.subject
Ta'rif

Optional subject identifying the individual or individuals the report is for.

Qisqa tavsifWhat individual(s) the report is for
Boshqaruv0..1
TuriReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
147. MeasureReport.group:availableOwnBudget.population
Ta'rif

The populations that make up the population group, one for each type of population appropriate for the measure.

Qisqa tavsifThe populations in the group
Boshqaruv0..*
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
149. MeasureReport.group:availableOwnBudget.population.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
151. MeasureReport.group:availableOwnBudget.population.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
153. MeasureReport.group:availableOwnBudget.population.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
155. MeasureReport.group:availableOwnBudget.population.linkId
Ta'rif

The population from the Measure that corresponds to this population in the MeasureReport resource.

Qisqa tavsifPointer to specific population from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
157. MeasureReport.group:availableOwnBudget.population.code
Ta'rif

The type of the population.

Qisqa tavsifinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Boshqaruv0..1
BogʻlanishMos kelmaydigan hollar bundan mustasno, ushbu kodlar majburiy ravishda quyidagidan olinadi MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
159. MeasureReport.group:availableOwnBudget.population.count
Ta'rif

The number of members of the population.

Qisqa tavsifSize of the population
Boshqaruv0..1
Turiinteger
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
161. MeasureReport.group:availableOwnBudget.population.subjectResults
Ta'rif

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

Qisqa tavsifFor subject-list reports, the subject results in this population
Boshqaruv0..1
TuriReference(List)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
163. MeasureReport.group:availableOwnBudget.population.subjectReport
Ta'rif

A reference to an individual level MeasureReport resource for a member of the population.

Qisqa tavsifFor subject-list reports, a subject result in this population
Izohlar

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Boshqaruv0..*
TuriReference(MeasureReport)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
165. MeasureReport.group:availableOwnBudget.population.subjects
Ta'rif

Optional Group identifying the individuals that make up the population.

Qisqa tavsifWhat individual(s) in the population
Izohlar

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Boshqaruv0..1
TuriReference(Group)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
167. MeasureReport.group:availableOwnBudget.measureScore[x]
Ta'rif

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

Qisqa tavsifAmount in UZS; absent when the program or the organization does not have this state
Boshqaruv0..1
TuriQuantity
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
169. MeasureReport.group:availableOwnBudget.measureScore[x].id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turiid
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
171. MeasureReport.group:availableOwnBudget.measureScore[x].extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingUshbu element quyidagi slices to‘plamini belgilaydi MeasureReport.group.measureScore[x].extension. Slices quyidagicha: Tartibsiz va Open, va quyidagi diskriminatorlar yordamida farqlanishi mumkin:
  • value @ url
173. MeasureReport.group:availableOwnBudget.measureScore[x].value
Ta'rif

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

Qisqa tavsifNumerical value (with implicit precision)
Izohlar

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Boshqaruv1..1
Turidecimal
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Precision is handled implicitly in almost all cases of measurement.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
175. MeasureReport.group:availableOwnBudget.measureScore[x].comparator
Ta'rif

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Qisqa tavsif< | <= | >= | > | ad - how to understand the value
Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Turicode
Modifikator hisoblanaditrue sababi This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Mavjud bo‘lmaganda ma’nosiIf there is no comparator, then there is no modification of the value
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
177. MeasureReport.group:availableOwnBudget.measureScore[x].unit
Ta'rif

A human-readable form of the unit.

Qisqa tavsifUnit representation
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
179. MeasureReport.group:availableOwnBudget.measureScore[x].system
Ta'rif

The identification of the system that provides the coded form of the unit.

Qisqa tavsifSystem that defines coded unit form
Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turiuri
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need to know the system that defines the coded form of the unit.

Andoza qiymat
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
181. MeasureReport.group:availableOwnBudget.measureScore[x].code
Ta'rif

A computer processable form of the unit in some unit representation system.

Qisqa tavsifCoded form of the unit
Izohlar

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turicode
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Andoza qiymat
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
183. MeasureReport.group:availableOwnBudget.stratifier
Ta'rif

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

Qisqa tavsifStratification results
Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
185. MeasureReport.group:availableOwnBudget.stratifier.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
187. MeasureReport.group:availableOwnBudget.stratifier.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
189. MeasureReport.group:availableOwnBudget.stratifier.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
191. MeasureReport.group:availableOwnBudget.stratifier.linkId
Ta'rif

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

Qisqa tavsifPointer to specific stratifier from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
193. MeasureReport.group:availableOwnBudget.stratifier.code
Ta'rif

The meaning of this stratifier, as defined in the measure definition.

Qisqa tavsifWhat stratifier of the group
Boshqaruv0..1
BogʻlanishKodlar misoli uchun qarang MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
195. MeasureReport.group:availableOwnBudget.stratifier.stratum
Ta'rif

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

Qisqa tavsifStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
197. MeasureReport.group:availableOwnBudget.stratifier.stratum.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
199. MeasureReport.group:availableOwnBudget.stratifier.stratum.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
201. MeasureReport.group:availableOwnBudget.stratifier.stratum.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
203. MeasureReport.group:availableOwnBudget.stratifier.stratum.value[x]
Ta'rif

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

Qisqa tavsifThe stratum value, e.g. male
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
BogʻlanishKodlar misoli uchun qarang MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TuriTanlov: CodeableConcept, boolean, Quantity, Range, Reference
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
205. MeasureReport.group:availableOwnBudget.stratifier.stratum.component
Ta'rif

A stratifier component value.

Qisqa tavsifStratifier component values
Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
207. MeasureReport.group:availableOwnBudget.stratifier.stratum.component.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
209. MeasureReport.group:availableOwnBudget.stratifier.stratum.component.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
211. MeasureReport.group:availableOwnBudget.stratifier.stratum.component.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
213. MeasureReport.group:availableOwnBudget.stratifier.stratum.component.linkId
Ta'rif

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

Qisqa tavsifPointer to specific stratifier component from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
215. MeasureReport.group:availableOwnBudget.stratifier.stratum.component.code
Ta'rif

The code for the stratum component value.

Qisqa tavsifWhat stratifier component of the group
Boshqaruv1..1
BogʻlanishKodlar misoli uchun qarang MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
217. MeasureReport.group:availableOwnBudget.stratifier.stratum.component.value[x]
Ta'rif

The stratum component value.

Qisqa tavsifThe stratum component value, e.g. male
Boshqaruv1..1
BogʻlanishKodlar misoli uchun qarang MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TuriTanlov: CodeableConcept, boolean, Quantity, Range, Reference
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
219. MeasureReport.group:availableOwnBudget.stratifier.stratum.population
Ta'rif

The populations that make up the stratum, one for each type of population appropriate to the measure.

Qisqa tavsifPopulation results in this stratum
Boshqaruv0..*
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
221. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
223. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
225. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
227. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.linkId
Ta'rif

The population from the Measure that corresponds to this population in the MeasureReport resource.

Qisqa tavsifPointer to specific population from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
229. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.code
Ta'rif

The type of the population.

Qisqa tavsifinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Boshqaruv0..1
BogʻlanishMos kelmaydigan hollar bundan mustasno, ushbu kodlar majburiy ravishda quyidagidan olinadi MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
231. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.count
Ta'rif

The number of members of the population in this stratum.

Qisqa tavsifSize of the population
Boshqaruv0..1
Turiinteger
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
233. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.subjectResults
Ta'rif

This element refers to a List of individual level MeasureReport resources, one for each subject in this population in this stratum.

Qisqa tavsifFor subject-list reports, the subject results in this population
Boshqaruv0..1
TuriReference(List)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
235. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.subjectReport
Ta'rif

A reference to an individual level MeasureReport resource for a member of the population.

Qisqa tavsifFor subject-list reports, a subject result in this population
Izohlar

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Boshqaruv0..*
TuriReference(MeasureReport)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
237. MeasureReport.group:availableOwnBudget.stratifier.stratum.population.subjects
Ta'rif

Optional Group identifying the individuals that make up the population.

Qisqa tavsifWhat individual(s) in the population
Izohlar

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group SHALL be an actual (as opposed to a definitional) group.

Boshqaruv0..1
TuriReference(Group)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
239. MeasureReport.group:availableOwnBudget.stratifier.stratum.measureScore[x]
Ta'rif

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

Qisqa tavsifWhat score this stratum achieved
Boshqaruv0..1
TuriTanlov: Quantity, dateTime, CodeableConcept, Period, Range, Duration
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
241. MeasureReport.group:reserved
Slice nomireserved
Ta'rif

The results of the calculation, one for each population group in the measure.

Qisqa tavsifMeasure results for each group
Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: mrp-2, mrp-1
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
243. MeasureReport.group:reserved.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
245. MeasureReport.group:reserved.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
247. MeasureReport.group:reserved.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
249. MeasureReport.group:reserved.linkId
Ta'rif

The group from the Measure that corresponds to this group in the MeasureReport resource.

Qisqa tavsifPointer to specific group from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
251. MeasureReport.group:reserved.code
Ta'rif

The meaning of the population group as defined in the measure definition.

Qisqa tavsifMeaning of the group
Boshqaruv0..1
BogʻlanishKodlar misoli uchun qarang MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Andoza qiymat
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved"/>
  </coding>
</code>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
253. MeasureReport.group:reserved.subject
Ta'rif

Optional subject identifying the individual or individuals the report is for.

Qisqa tavsifWhat individual(s) the report is for
Boshqaruv0..1
TuriReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
255. MeasureReport.group:reserved.population
Ta'rif

The populations that make up the population group, one for each type of population appropriate for the measure.

Qisqa tavsifThe populations in the group
Boshqaruv0..*
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
257. MeasureReport.group:reserved.population.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
259. MeasureReport.group:reserved.population.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
261. MeasureReport.group:reserved.population.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
263. MeasureReport.group:reserved.population.linkId
Ta'rif

The population from the Measure that corresponds to this population in the MeasureReport resource.

Qisqa tavsifPointer to specific population from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
265. MeasureReport.group:reserved.population.code
Ta'rif

The type of the population.

Qisqa tavsifinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Boshqaruv0..1
BogʻlanishMos kelmaydigan hollar bundan mustasno, ushbu kodlar majburiy ravishda quyidagidan olinadi MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
267. MeasureReport.group:reserved.population.count
Ta'rif

The number of members of the population.

Qisqa tavsifSize of the population
Boshqaruv0..1
Turiinteger
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
269. MeasureReport.group:reserved.population.subjectResults
Ta'rif

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

Qisqa tavsifFor subject-list reports, the subject results in this population
Boshqaruv0..1
TuriReference(List)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
271. MeasureReport.group:reserved.population.subjectReport
Ta'rif

A reference to an individual level MeasureReport resource for a member of the population.

Qisqa tavsifFor subject-list reports, a subject result in this population
Izohlar

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Boshqaruv0..*
TuriReference(MeasureReport)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
273. MeasureReport.group:reserved.population.subjects
Ta'rif

Optional Group identifying the individuals that make up the population.

Qisqa tavsifWhat individual(s) in the population
Izohlar

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Boshqaruv0..1
TuriReference(Group)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
275. MeasureReport.group:reserved.measureScore[x]
Ta'rif

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

Qisqa tavsifAmount in UZS; absent when the program or the organization does not have this state
Boshqaruv0..1
TuriQuantity
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
277. MeasureReport.group:reserved.measureScore[x].id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turiid
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
279. MeasureReport.group:reserved.measureScore[x].extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingUshbu element quyidagi slices to‘plamini belgilaydi MeasureReport.group.measureScore[x].extension. Slices quyidagicha: Tartibsiz va Open, va quyidagi diskriminatorlar yordamida farqlanishi mumkin:
  • value @ url
281. MeasureReport.group:reserved.measureScore[x].value
Ta'rif

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

Qisqa tavsifNumerical value (with implicit precision)
Izohlar

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Boshqaruv1..1
Turidecimal
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Precision is handled implicitly in almost all cases of measurement.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
283. MeasureReport.group:reserved.measureScore[x].comparator
Ta'rif

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Qisqa tavsif< | <= | >= | > | ad - how to understand the value
Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Turicode
Modifikator hisoblanaditrue sababi This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Mavjud bo‘lmaganda ma’nosiIf there is no comparator, then there is no modification of the value
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
285. MeasureReport.group:reserved.measureScore[x].unit
Ta'rif

A human-readable form of the unit.

Qisqa tavsifUnit representation
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
287. MeasureReport.group:reserved.measureScore[x].system
Ta'rif

The identification of the system that provides the coded form of the unit.

Qisqa tavsifSystem that defines coded unit form
Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turiuri
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need to know the system that defines the coded form of the unit.

Andoza qiymat
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
289. MeasureReport.group:reserved.measureScore[x].code
Ta'rif

A computer processable form of the unit in some unit representation system.

Qisqa tavsifCoded form of the unit
Izohlar

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turicode
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Andoza qiymat
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
291. MeasureReport.group:reserved.stratifier
Ta'rif

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

Qisqa tavsifStratification results
Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
293. MeasureReport.group:reserved.stratifier.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
295. MeasureReport.group:reserved.stratifier.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
297. MeasureReport.group:reserved.stratifier.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
299. MeasureReport.group:reserved.stratifier.linkId
Ta'rif

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

Qisqa tavsifPointer to specific stratifier from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
301. MeasureReport.group:reserved.stratifier.code
Ta'rif

The meaning of this stratifier, as defined in the measure definition.

Qisqa tavsifWhat stratifier of the group
Boshqaruv0..1
BogʻlanishKodlar misoli uchun qarang MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
303. MeasureReport.group:reserved.stratifier.stratum
Ta'rif

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

Qisqa tavsifStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
305. MeasureReport.group:reserved.stratifier.stratum.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
307. MeasureReport.group:reserved.stratifier.stratum.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
309. MeasureReport.group:reserved.stratifier.stratum.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
311. MeasureReport.group:reserved.stratifier.stratum.value[x]
Ta'rif

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

Qisqa tavsifThe stratum value, e.g. male
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
BogʻlanishKodlar misoli uchun qarang MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TuriTanlov: CodeableConcept, boolean, Quantity, Range, Reference
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
313. MeasureReport.group:reserved.stratifier.stratum.component
Ta'rif

A stratifier component value.

Qisqa tavsifStratifier component values
Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
315. MeasureReport.group:reserved.stratifier.stratum.component.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
317. MeasureReport.group:reserved.stratifier.stratum.component.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
319. MeasureReport.group:reserved.stratifier.stratum.component.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
321. MeasureReport.group:reserved.stratifier.stratum.component.linkId
Ta'rif

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

Qisqa tavsifPointer to specific stratifier component from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
323. MeasureReport.group:reserved.stratifier.stratum.component.code
Ta'rif

The code for the stratum component value.

Qisqa tavsifWhat stratifier component of the group
Boshqaruv1..1
BogʻlanishKodlar misoli uchun qarang MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
325. MeasureReport.group:reserved.stratifier.stratum.component.value[x]
Ta'rif

The stratum component value.

Qisqa tavsifThe stratum component value, e.g. male
Boshqaruv1..1
BogʻlanishKodlar misoli uchun qarang MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TuriTanlov: CodeableConcept, boolean, Quantity, Range, Reference
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
327. MeasureReport.group:reserved.stratifier.stratum.population
Ta'rif

The populations that make up the stratum, one for each type of population appropriate to the measure.

Qisqa tavsifPopulation results in this stratum
Boshqaruv0..*
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
329. MeasureReport.group:reserved.stratifier.stratum.population.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
331. MeasureReport.group:reserved.stratifier.stratum.population.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
333. MeasureReport.group:reserved.stratifier.stratum.population.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
335. MeasureReport.group:reserved.stratifier.stratum.population.linkId
Ta'rif

The population from the Measure that corresponds to this population in the MeasureReport resource.

Qisqa tavsifPointer to specific population from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
337. MeasureReport.group:reserved.stratifier.stratum.population.code
Ta'rif

The type of the population.

Qisqa tavsifinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Boshqaruv0..1
BogʻlanishMos kelmaydigan hollar bundan mustasno, ushbu kodlar majburiy ravishda quyidagidan olinadi MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
339. MeasureReport.group:reserved.stratifier.stratum.population.count
Ta'rif

The number of members of the population in this stratum.

Qisqa tavsifSize of the population
Boshqaruv0..1
Turiinteger
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
341. MeasureReport.group:reserved.stratifier.stratum.population.subjectResults
Ta'rif

This element refers to a List of individual level MeasureReport resources, one for each subject in this population in this stratum.

Qisqa tavsifFor subject-list reports, the subject results in this population
Boshqaruv0..1
TuriReference(List)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
343. MeasureReport.group:reserved.stratifier.stratum.population.subjectReport
Ta'rif

A reference to an individual level MeasureReport resource for a member of the population.

Qisqa tavsifFor subject-list reports, a subject result in this population
Izohlar

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Boshqaruv0..*
TuriReference(MeasureReport)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
345. MeasureReport.group:reserved.stratifier.stratum.population.subjects
Ta'rif

Optional Group identifying the individuals that make up the population.

Qisqa tavsifWhat individual(s) in the population
Izohlar

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group SHALL be an actual (as opposed to a definitional) group.

Boshqaruv0..1
TuriReference(Group)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
347. MeasureReport.group:reserved.stratifier.stratum.measureScore[x]
Ta'rif

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

Qisqa tavsifWhat score this stratum achieved
Boshqaruv0..1
TuriTanlov: Quantity, dateTime, CodeableConcept, Period, Range, Duration
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
349. MeasureReport.group:reservedBudgetOverride
Slice nomireservedBudgetOverride
Ta'rif

The results of the calculation, one for each population group in the measure.

Qisqa tavsifMeasure results for each group
Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: mrp-2, mrp-1
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
351. MeasureReport.group:reservedBudgetOverride.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
353. MeasureReport.group:reservedBudgetOverride.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
355. MeasureReport.group:reservedBudgetOverride.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
357. MeasureReport.group:reservedBudgetOverride.linkId
Ta'rif

The group from the Measure that corresponds to this group in the MeasureReport resource.

Qisqa tavsifPointer to specific group from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
359. MeasureReport.group:reservedBudgetOverride.code
Ta'rif

The meaning of the population group as defined in the measure definition.

Qisqa tavsifMeaning of the group
Boshqaruv0..1
BogʻlanishKodlar misoli uchun qarang MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Andoza qiymat
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "reserved-budget-override"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="reserved-budget-override"/>
  </coding>
</code>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
361. MeasureReport.group:reservedBudgetOverride.subject
Ta'rif

Optional subject identifying the individual or individuals the report is for.

Qisqa tavsifWhat individual(s) the report is for
Boshqaruv0..1
TuriReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
363. MeasureReport.group:reservedBudgetOverride.population
Ta'rif

The populations that make up the population group, one for each type of population appropriate for the measure.

Qisqa tavsifThe populations in the group
Boshqaruv0..*
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
365. MeasureReport.group:reservedBudgetOverride.population.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
367. MeasureReport.group:reservedBudgetOverride.population.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
369. MeasureReport.group:reservedBudgetOverride.population.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
371. MeasureReport.group:reservedBudgetOverride.population.linkId
Ta'rif

The population from the Measure that corresponds to this population in the MeasureReport resource.

Qisqa tavsifPointer to specific population from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
373. MeasureReport.group:reservedBudgetOverride.population.code
Ta'rif

The type of the population.

Qisqa tavsifinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Boshqaruv0..1
BogʻlanishMos kelmaydigan hollar bundan mustasno, ushbu kodlar majburiy ravishda quyidagidan olinadi MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
375. MeasureReport.group:reservedBudgetOverride.population.count
Ta'rif

The number of members of the population.

Qisqa tavsifSize of the population
Boshqaruv0..1
Turiinteger
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
377. MeasureReport.group:reservedBudgetOverride.population.subjectResults
Ta'rif

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

Qisqa tavsifFor subject-list reports, the subject results in this population
Boshqaruv0..1
TuriReference(List)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
379. MeasureReport.group:reservedBudgetOverride.population.subjectReport
Ta'rif

A reference to an individual level MeasureReport resource for a member of the population.

Qisqa tavsifFor subject-list reports, a subject result in this population
Izohlar

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Boshqaruv0..*
TuriReference(MeasureReport)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
381. MeasureReport.group:reservedBudgetOverride.population.subjects
Ta'rif

Optional Group identifying the individuals that make up the population.

Qisqa tavsifWhat individual(s) in the population
Izohlar

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Boshqaruv0..1
TuriReference(Group)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
383. MeasureReport.group:reservedBudgetOverride.measureScore[x]
Ta'rif

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

Qisqa tavsifAmount in UZS; absent when the program or the organization does not have this state
Boshqaruv0..1
TuriQuantity
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
385. MeasureReport.group:reservedBudgetOverride.measureScore[x].id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turiid
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
387. MeasureReport.group:reservedBudgetOverride.measureScore[x].extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingUshbu element quyidagi slices to‘plamini belgilaydi MeasureReport.group.measureScore[x].extension. Slices quyidagicha: Tartibsiz va Open, va quyidagi diskriminatorlar yordamida farqlanishi mumkin:
  • value @ url
389. MeasureReport.group:reservedBudgetOverride.measureScore[x].value
Ta'rif

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

Qisqa tavsifNumerical value (with implicit precision)
Izohlar

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Boshqaruv1..1
Turidecimal
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Precision is handled implicitly in almost all cases of measurement.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
391. MeasureReport.group:reservedBudgetOverride.measureScore[x].comparator
Ta'rif

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Qisqa tavsif< | <= | >= | > | ad - how to understand the value
Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Turicode
Modifikator hisoblanaditrue sababi This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Mavjud bo‘lmaganda ma’nosiIf there is no comparator, then there is no modification of the value
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
393. MeasureReport.group:reservedBudgetOverride.measureScore[x].unit
Ta'rif

A human-readable form of the unit.

Qisqa tavsifUnit representation
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
395. MeasureReport.group:reservedBudgetOverride.measureScore[x].system
Ta'rif

The identification of the system that provides the coded form of the unit.

Qisqa tavsifSystem that defines coded unit form
Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turiuri
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need to know the system that defines the coded form of the unit.

Andoza qiymat
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
397. MeasureReport.group:reservedBudgetOverride.measureScore[x].code
Ta'rif

A computer processable form of the unit in some unit representation system.

Qisqa tavsifCoded form of the unit
Izohlar

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turicode
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Andoza qiymat
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
399. MeasureReport.group:reservedBudgetOverride.stratifier
Ta'rif

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

Qisqa tavsifStratification results
Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
401. MeasureReport.group:reservedBudgetOverride.stratifier.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
403. MeasureReport.group:reservedBudgetOverride.stratifier.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
405. MeasureReport.group:reservedBudgetOverride.stratifier.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
407. MeasureReport.group:reservedBudgetOverride.stratifier.linkId
Ta'rif

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

Qisqa tavsifPointer to specific stratifier from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
409. MeasureReport.group:reservedBudgetOverride.stratifier.code
Ta'rif

The meaning of this stratifier, as defined in the measure definition.

Qisqa tavsifWhat stratifier of the group
Boshqaruv0..1
BogʻlanishKodlar misoli uchun qarang MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
411. MeasureReport.group:reservedBudgetOverride.stratifier.stratum
Ta'rif

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

Qisqa tavsifStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
413. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
415. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
417. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
419. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.value[x]
Ta'rif

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

Qisqa tavsifThe stratum value, e.g. male
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
BogʻlanishKodlar misoli uchun qarang MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TuriTanlov: CodeableConcept, boolean, Quantity, Range, Reference
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
421. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component
Ta'rif

A stratifier component value.

Qisqa tavsifStratifier component values
Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
423. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
425. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
427. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
429. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.linkId
Ta'rif

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

Qisqa tavsifPointer to specific stratifier component from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
431. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.code
Ta'rif

The code for the stratum component value.

Qisqa tavsifWhat stratifier component of the group
Boshqaruv1..1
BogʻlanishKodlar misoli uchun qarang MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
433. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.component.value[x]
Ta'rif

The stratum component value.

Qisqa tavsifThe stratum component value, e.g. male
Boshqaruv1..1
BogʻlanishKodlar misoli uchun qarang MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TuriTanlov: CodeableConcept, boolean, Quantity, Range, Reference
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
435. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population
Ta'rif

The populations that make up the stratum, one for each type of population appropriate to the measure.

Qisqa tavsifPopulation results in this stratum
Boshqaruv0..*
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
437. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
439. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
441. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
443. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.linkId
Ta'rif

The population from the Measure that corresponds to this population in the MeasureReport resource.

Qisqa tavsifPointer to specific population from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
445. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.code
Ta'rif

The type of the population.

Qisqa tavsifinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Boshqaruv0..1
BogʻlanishMos kelmaydigan hollar bundan mustasno, ushbu kodlar majburiy ravishda quyidagidan olinadi MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
447. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.count
Ta'rif

The number of members of the population in this stratum.

Qisqa tavsifSize of the population
Boshqaruv0..1
Turiinteger
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
449. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.subjectResults
Ta'rif

This element refers to a List of individual level MeasureReport resources, one for each subject in this population in this stratum.

Qisqa tavsifFor subject-list reports, the subject results in this population
Boshqaruv0..1
TuriReference(List)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
451. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.subjectReport
Ta'rif

A reference to an individual level MeasureReport resource for a member of the population.

Qisqa tavsifFor subject-list reports, a subject result in this population
Izohlar

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Boshqaruv0..*
TuriReference(MeasureReport)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
453. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.population.subjects
Ta'rif

Optional Group identifying the individuals that make up the population.

Qisqa tavsifWhat individual(s) in the population
Izohlar

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group SHALL be an actual (as opposed to a definitional) group.

Boshqaruv0..1
TuriReference(Group)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
455. MeasureReport.group:reservedBudgetOverride.stratifier.stratum.measureScore[x]
Ta'rif

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

Qisqa tavsifWhat score this stratum achieved
Boshqaruv0..1
TuriTanlov: Quantity, dateTime, CodeableConcept, Period, Range, Duration
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
457. MeasureReport.group:claimed
Slice nomiclaimed
Ta'rif

The results of the calculation, one for each population group in the measure.

Qisqa tavsifMeasure results for each group
Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: mrp-2, mrp-1
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
459. MeasureReport.group:claimed.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
461. MeasureReport.group:claimed.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
463. MeasureReport.group:claimed.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
465. MeasureReport.group:claimed.linkId
Ta'rif

The group from the Measure that corresponds to this group in the MeasureReport resource.

Qisqa tavsifPointer to specific group from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
467. MeasureReport.group:claimed.code
Ta'rif

The meaning of the population group as defined in the measure definition.

Qisqa tavsifMeaning of the group
Boshqaruv0..1
BogʻlanishKodlar misoli uchun qarang MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Andoza qiymat
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "claimed"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="claimed"/>
  </coding>
</code>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
469. MeasureReport.group:claimed.subject
Ta'rif

Optional subject identifying the individual or individuals the report is for.

Qisqa tavsifWhat individual(s) the report is for
Boshqaruv0..1
TuriReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
471. MeasureReport.group:claimed.population
Ta'rif

The populations that make up the population group, one for each type of population appropriate for the measure.

Qisqa tavsifThe populations in the group
Boshqaruv0..*
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
473. MeasureReport.group:claimed.population.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
475. MeasureReport.group:claimed.population.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
477. MeasureReport.group:claimed.population.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
479. MeasureReport.group:claimed.population.linkId
Ta'rif

The population from the Measure that corresponds to this population in the MeasureReport resource.

Qisqa tavsifPointer to specific population from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
481. MeasureReport.group:claimed.population.code
Ta'rif

The type of the population.

Qisqa tavsifinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Boshqaruv0..1
BogʻlanishMos kelmaydigan hollar bundan mustasno, ushbu kodlar majburiy ravishda quyidagidan olinadi MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
483. MeasureReport.group:claimed.population.count
Ta'rif

The number of members of the population.

Qisqa tavsifSize of the population
Boshqaruv0..1
Turiinteger
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
485. MeasureReport.group:claimed.population.subjectResults
Ta'rif

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

Qisqa tavsifFor subject-list reports, the subject results in this population
Boshqaruv0..1
TuriReference(List)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
487. MeasureReport.group:claimed.population.subjectReport
Ta'rif

A reference to an individual level MeasureReport resource for a member of the population.

Qisqa tavsifFor subject-list reports, a subject result in this population
Izohlar

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Boshqaruv0..*
TuriReference(MeasureReport)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
489. MeasureReport.group:claimed.population.subjects
Ta'rif

Optional Group identifying the individuals that make up the population.

Qisqa tavsifWhat individual(s) in the population
Izohlar

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Boshqaruv0..1
TuriReference(Group)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
491. MeasureReport.group:claimed.measureScore[x]
Ta'rif

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

Qisqa tavsifAmount in UZS; absent when the program or the organization does not have this state
Boshqaruv0..1
TuriQuantity
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
493. MeasureReport.group:claimed.measureScore[x].id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turiid
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
495. MeasureReport.group:claimed.measureScore[x].extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingUshbu element quyidagi slices to‘plamini belgilaydi MeasureReport.group.measureScore[x].extension. Slices quyidagicha: Tartibsiz va Open, va quyidagi diskriminatorlar yordamida farqlanishi mumkin:
  • value @ url
497. MeasureReport.group:claimed.measureScore[x].value
Ta'rif

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

Qisqa tavsifNumerical value (with implicit precision)
Izohlar

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Boshqaruv1..1
Turidecimal
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Precision is handled implicitly in almost all cases of measurement.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
499. MeasureReport.group:claimed.measureScore[x].comparator
Ta'rif

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Qisqa tavsif< | <= | >= | > | ad - how to understand the value
Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Turicode
Modifikator hisoblanaditrue sababi This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Mavjud bo‘lmaganda ma’nosiIf there is no comparator, then there is no modification of the value
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
501. MeasureReport.group:claimed.measureScore[x].unit
Ta'rif

A human-readable form of the unit.

Qisqa tavsifUnit representation
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
503. MeasureReport.group:claimed.measureScore[x].system
Ta'rif

The identification of the system that provides the coded form of the unit.

Qisqa tavsifSystem that defines coded unit form
Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turiuri
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need to know the system that defines the coded form of the unit.

Andoza qiymat
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
505. MeasureReport.group:claimed.measureScore[x].code
Ta'rif

A computer processable form of the unit in some unit representation system.

Qisqa tavsifCoded form of the unit
Izohlar

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turicode
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Andoza qiymat
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
507. MeasureReport.group:claimed.stratifier
Ta'rif

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

Qisqa tavsifStratification results
Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
509. MeasureReport.group:claimed.stratifier.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
511. MeasureReport.group:claimed.stratifier.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
513. MeasureReport.group:claimed.stratifier.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
515. MeasureReport.group:claimed.stratifier.linkId
Ta'rif

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

Qisqa tavsifPointer to specific stratifier from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
517. MeasureReport.group:claimed.stratifier.code
Ta'rif

The meaning of this stratifier, as defined in the measure definition.

Qisqa tavsifWhat stratifier of the group
Boshqaruv0..1
BogʻlanishKodlar misoli uchun qarang MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
519. MeasureReport.group:claimed.stratifier.stratum
Ta'rif

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

Qisqa tavsifStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
521. MeasureReport.group:claimed.stratifier.stratum.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
523. MeasureReport.group:claimed.stratifier.stratum.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
525. MeasureReport.group:claimed.stratifier.stratum.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
527. MeasureReport.group:claimed.stratifier.stratum.value[x]
Ta'rif

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

Qisqa tavsifThe stratum value, e.g. male
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
BogʻlanishKodlar misoli uchun qarang MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TuriTanlov: CodeableConcept, boolean, Quantity, Range, Reference
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
529. MeasureReport.group:claimed.stratifier.stratum.component
Ta'rif

A stratifier component value.

Qisqa tavsifStratifier component values
Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
531. MeasureReport.group:claimed.stratifier.stratum.component.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
533. MeasureReport.group:claimed.stratifier.stratum.component.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
535. MeasureReport.group:claimed.stratifier.stratum.component.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
537. MeasureReport.group:claimed.stratifier.stratum.component.linkId
Ta'rif

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

Qisqa tavsifPointer to specific stratifier component from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
539. MeasureReport.group:claimed.stratifier.stratum.component.code
Ta'rif

The code for the stratum component value.

Qisqa tavsifWhat stratifier component of the group
Boshqaruv1..1
BogʻlanishKodlar misoli uchun qarang MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
541. MeasureReport.group:claimed.stratifier.stratum.component.value[x]
Ta'rif

The stratum component value.

Qisqa tavsifThe stratum component value, e.g. male
Boshqaruv1..1
BogʻlanishKodlar misoli uchun qarang MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TuriTanlov: CodeableConcept, boolean, Quantity, Range, Reference
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
543. MeasureReport.group:claimed.stratifier.stratum.population
Ta'rif

The populations that make up the stratum, one for each type of population appropriate to the measure.

Qisqa tavsifPopulation results in this stratum
Boshqaruv0..*
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
545. MeasureReport.group:claimed.stratifier.stratum.population.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
547. MeasureReport.group:claimed.stratifier.stratum.population.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
549. MeasureReport.group:claimed.stratifier.stratum.population.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
551. MeasureReport.group:claimed.stratifier.stratum.population.linkId
Ta'rif

The population from the Measure that corresponds to this population in the MeasureReport resource.

Qisqa tavsifPointer to specific population from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
553. MeasureReport.group:claimed.stratifier.stratum.population.code
Ta'rif

The type of the population.

Qisqa tavsifinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Boshqaruv0..1
BogʻlanishMos kelmaydigan hollar bundan mustasno, ushbu kodlar majburiy ravishda quyidagidan olinadi MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
555. MeasureReport.group:claimed.stratifier.stratum.population.count
Ta'rif

The number of members of the population in this stratum.

Qisqa tavsifSize of the population
Boshqaruv0..1
Turiinteger
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
557. MeasureReport.group:claimed.stratifier.stratum.population.subjectResults
Ta'rif

This element refers to a List of individual level MeasureReport resources, one for each subject in this population in this stratum.

Qisqa tavsifFor subject-list reports, the subject results in this population
Boshqaruv0..1
TuriReference(List)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
559. MeasureReport.group:claimed.stratifier.stratum.population.subjectReport
Ta'rif

A reference to an individual level MeasureReport resource for a member of the population.

Qisqa tavsifFor subject-list reports, a subject result in this population
Izohlar

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Boshqaruv0..*
TuriReference(MeasureReport)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
561. MeasureReport.group:claimed.stratifier.stratum.population.subjects
Ta'rif

Optional Group identifying the individuals that make up the population.

Qisqa tavsifWhat individual(s) in the population
Izohlar

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group SHALL be an actual (as opposed to a definitional) group.

Boshqaruv0..1
TuriReference(Group)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
563. MeasureReport.group:claimed.stratifier.stratum.measureScore[x]
Ta'rif

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

Qisqa tavsifWhat score this stratum achieved
Boshqaruv0..1
TuriTanlov: Quantity, dateTime, CodeableConcept, Period, Range, Duration
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
565. MeasureReport.group:payable
Slice nomipayable
Ta'rif

The results of the calculation, one for each population group in the measure.

Qisqa tavsifMeasure results for each group
Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: mrp-2, mrp-1
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
567. MeasureReport.group:payable.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
569. MeasureReport.group:payable.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
571. MeasureReport.group:payable.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
573. MeasureReport.group:payable.linkId
Ta'rif

The group from the Measure that corresponds to this group in the MeasureReport resource.

Qisqa tavsifPointer to specific group from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
575. MeasureReport.group:payable.code
Ta'rif

The meaning of the population group as defined in the measure definition.

Qisqa tavsifMeaning of the group
Boshqaruv0..1
BogʻlanishKodlar misoli uchun qarang MeasureGroupExample
(example to http://hl7.org/fhir/ValueSet/measure-group-example|5.0.0)

Example of measure groups.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Andoza qiymat
{
  "coding" : [
    {
      "system" : "https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs",
      "code" : "payable"
    }
  ]
}
<code>
  <coding>
    <system value="https://ig.shif.uz/core/CodeSystem/program-budget-indicator-cs"/>
    <code value="payable"/>
  </coding>
</code>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
577. MeasureReport.group:payable.subject
Ta'rif

Optional subject identifying the individual or individuals the report is for.

Qisqa tavsifWhat individual(s) the report is for
Boshqaruv0..1
TuriReference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
579. MeasureReport.group:payable.population
Ta'rif

The populations that make up the population group, one for each type of population appropriate for the measure.

Qisqa tavsifThe populations in the group
Boshqaruv0..*
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
581. MeasureReport.group:payable.population.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
583. MeasureReport.group:payable.population.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
585. MeasureReport.group:payable.population.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
587. MeasureReport.group:payable.population.linkId
Ta'rif

The population from the Measure that corresponds to this population in the MeasureReport resource.

Qisqa tavsifPointer to specific population from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
589. MeasureReport.group:payable.population.code
Ta'rif

The type of the population.

Qisqa tavsifinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Boshqaruv0..1
BogʻlanishMos kelmaydigan hollar bundan mustasno, ushbu kodlar majburiy ravishda quyidagidan olinadi MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
591. MeasureReport.group:payable.population.count
Ta'rif

The number of members of the population.

Qisqa tavsifSize of the population
Boshqaruv0..1
Turiinteger
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
593. MeasureReport.group:payable.population.subjectResults
Ta'rif

This element refers to a List of individual level MeasureReport resources, one for each subject in this population.

Qisqa tavsifFor subject-list reports, the subject results in this population
Boshqaruv0..1
TuriReference(List)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
595. MeasureReport.group:payable.population.subjectReport
Ta'rif

A reference to an individual level MeasureReport resource for a member of the population.

Qisqa tavsifFor subject-list reports, a subject result in this population
Izohlar

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Boshqaruv0..*
TuriReference(MeasureReport)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
597. MeasureReport.group:payable.population.subjects
Ta'rif

Optional Group identifying the individuals that make up the population.

Qisqa tavsifWhat individual(s) in the population
Izohlar

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be an actual (as opposed to a definitional) group.

Boshqaruv0..1
TuriReference(Group)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
599. MeasureReport.group:payable.measureScore[x]
Ta'rif

The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group.

Qisqa tavsifAmount in UZS; absent when the program or the organization does not have this state
Boshqaruv0..1
TuriQuantity
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashtrue
Xulosatrue
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
601. MeasureReport.group:payable.measureScore[x].id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turiid
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
603. MeasureReport.group:payable.measureScore[x].extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingUshbu element quyidagi slices to‘plamini belgilaydi MeasureReport.group.measureScore[x].extension. Slices quyidagicha: Tartibsiz va Open, va quyidagi diskriminatorlar yordamida farqlanishi mumkin:
  • value @ url
605. MeasureReport.group:payable.measureScore[x].value
Ta'rif

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

Qisqa tavsifNumerical value (with implicit precision)
Izohlar

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Boshqaruv1..1
Turidecimal
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Precision is handled implicitly in almost all cases of measurement.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
607. MeasureReport.group:payable.measureScore[x].comparator
Ta'rif

How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Qisqa tavsif< | <= | >= | > | ad - how to understand the value
Boshqaruv0..1
BogʻlanishKodlar quyidagi manbadan olinishi SHART QuantityComparator
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|5.0.0)

How the Quantity should be understood and represented.

Turicode
Modifikator hisoblanaditrue sababi This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Mavjud bo‘lmaganda ma’nosiIf there is no comparator, then there is no modification of the value
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
609. MeasureReport.group:payable.measureScore[x].unit
Ta'rif

A human-readable form of the unit.

Qisqa tavsifUnit representation
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
611. MeasureReport.group:payable.measureScore[x].system
Ta'rif

The identification of the system that provides the coded form of the unit.

Qisqa tavsifSystem that defines coded unit form
Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turiuri
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need to know the system that defines the coded form of the unit.

Andoza qiymat
{
  "system" : "urn:iso:std:iso:4217"
}
<system value="urn:iso:std:iso:4217"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
613. MeasureReport.group:payable.measureScore[x].code
Ta'rif

A computer processable form of the unit in some unit representation system.

Qisqa tavsifCoded form of the unit
Izohlar

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: qty-3
Turicode
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Xulosatrue
Talablar

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Andoza qiymat
{
  "code" : "UZS"
}
<code value="UZS"/>
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
615. MeasureReport.group:payable.stratifier
Ta'rif

When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure.

Qisqa tavsifStratification results
Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
617. MeasureReport.group:payable.stratifier.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
619. MeasureReport.group:payable.stratifier.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
621. MeasureReport.group:payable.stratifier.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
623. MeasureReport.group:payable.stratifier.linkId
Ta'rif

The stratifier from the Measure that corresponds to this stratifier in the MeasureReport resource.

Qisqa tavsifPointer to specific stratifier from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
625. MeasureReport.group:payable.stratifier.code
Ta'rif

The meaning of this stratifier, as defined in the measure definition.

Qisqa tavsifWhat stratifier of the group
Boshqaruv0..1
BogʻlanishKodlar misoli uchun qarang MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
627. MeasureReport.group:payable.stratifier.stratum
Ta'rif

This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value.

Qisqa tavsifStratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
629. MeasureReport.group:payable.stratifier.stratum.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
631. MeasureReport.group:payable.stratifier.stratum.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
633. MeasureReport.group:payable.stratifier.stratum.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
635. MeasureReport.group:payable.stratifier.stratum.value[x]
Ta'rif

The value for this stratum, expressed as a CodeableConcept. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique.

Qisqa tavsifThe stratum value, e.g. male
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
BogʻlanishKodlar misoli uchun qarang MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TuriTanlov: CodeableConcept, boolean, Quantity, Range, Reference
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
637. MeasureReport.group:payable.stratifier.stratum.component
Ta'rif

A stratifier component value.

Qisqa tavsifStratifier component values
Boshqaruv0..*
Ushbu element quyidagi invariantlar ta’sirida: mrp-2
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
639. MeasureReport.group:payable.stratifier.stratum.component.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
641. MeasureReport.group:payable.stratifier.stratum.component.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
643. MeasureReport.group:payable.stratifier.stratum.component.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
645. MeasureReport.group:payable.stratifier.stratum.component.linkId
Ta'rif

The stratifier component from the Measure that corresponds to this stratifier component in the MeasureReport resource.

Qisqa tavsifPointer to specific stratifier component from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
647. MeasureReport.group:payable.stratifier.stratum.component.code
Ta'rif

The code for the stratum component value.

Qisqa tavsifWhat stratifier component of the group
Boshqaruv1..1
BogʻlanishKodlar misoli uchun qarang MeasureStratifierExample
(example to http://hl7.org/fhir/ValueSet/measure-stratifier-example|5.0.0)

Meaning of the stratifier.

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
649. MeasureReport.group:payable.stratifier.stratum.component.value[x]
Ta'rif

The stratum component value.

Qisqa tavsifThe stratum component value, e.g. male
Boshqaruv1..1
BogʻlanishKodlar misoli uchun qarang MeasureReportStratifierValueExample
(example to http://hl7.org/fhir/ValueSet/measurereport-stratifier-value-example|5.0.0)
TuriTanlov: CodeableConcept, boolean, Quantity, Range, Reference
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
651. MeasureReport.group:payable.stratifier.stratum.population
Ta'rif

The populations that make up the stratum, one for each type of population appropriate to the measure.

Qisqa tavsifPopulation results in this stratum
Boshqaruv0..*
TuriBackboneElement
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
653. MeasureReport.group:payable.stratifier.stratum.population.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turistring
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
655. MeasureReport.group:payable.stratifier.stratum.population.extension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
657. MeasureReport.group:payable.stratifier.stratum.population.modifierExtension
Ta'rif

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Qisqa tavsifExtensions that cannot be ignored even if unrecognized
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..*
TuriExtension
Modifikator hisoblanaditrue sababi Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Xulosatrue
Talablar

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Muqobil nomlarextensions, user content, modifiers
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
659. MeasureReport.group:payable.stratifier.stratum.population.linkId
Ta'rif

The population from the Measure that corresponds to this population in the MeasureReport resource.

Qisqa tavsifPointer to specific population from Measure
Boshqaruv0..1
Turistring
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
661. MeasureReport.group:payable.stratifier.stratum.population.code
Ta'rif

The type of the population.

Qisqa tavsifinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Boshqaruv0..1
BogʻlanishMos kelmaydigan hollar bundan mustasno, ushbu kodlar majburiy ravishda quyidagidan olinadi MeasurePopulationType
(extensible to http://hl7.org/fhir/ValueSet/measure-population|5.0.0)

The type of population (e.g. initial, numerator, denominator, etc.).

TuriCodeableConcept
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
663. MeasureReport.group:payable.stratifier.stratum.population.count
Ta'rif

The number of members of the population in this stratum.

Qisqa tavsifSize of the population
Boshqaruv0..1
Turiinteger
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
665. MeasureReport.group:payable.stratifier.stratum.population.subjectResults
Ta'rif

This element refers to a List of individual level MeasureReport resources, one for each subject in this population in this stratum.

Qisqa tavsifFor subject-list reports, the subject results in this population
Boshqaruv0..1
TuriReference(List)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
667. MeasureReport.group:payable.stratifier.stratum.population.subjectReport
Ta'rif

A reference to an individual level MeasureReport resource for a member of the population.

Qisqa tavsifFor subject-list reports, a subject result in this population
Izohlar

This element SHALL NOT be used in with subjectResults, either systems provide results as a List of MeasureReport, or as references to individual MeasureReports. Note that using this element introduces a constraint on the size of the subject-list MeasureReport; implementations would be free to return a TOO-COSTLY response if a request is made for a subject-list report with too many subjects.

Boshqaruv0..*
TuriReference(MeasureReport)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
669. MeasureReport.group:payable.stratifier.stratum.population.subjects
Ta'rif

Optional Group identifying the individuals that make up the population.

Qisqa tavsifWhat individual(s) in the population
Izohlar

Note that this element can only be used for summary and subject-list reports where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group SHALL be an actual (as opposed to a definitional) group.

Boshqaruv0..1
TuriReference(Group)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
671. MeasureReport.group:payable.stratifier.stratum.measureScore[x]
Ta'rif

The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum.

Qisqa tavsifWhat score this stratum achieved
Boshqaruv0..1
TuriTanlov: Quantity, dateTime, CodeableConcept, Period, Range, Duration
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Primitiv qiymatUshbu primitiv element mavjud bo‘lishi, mavjud bo‘lmasligi yoki kengaytma bilan almashtirilishi mumkin
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
673. MeasureReport.supplementalData
Ta'rif

A reference to a Resource that represents additional information collected for the report. If the value of the supplemental data is not a Resource (i.e. evaluating the supplementalData expression for this case in the measure results in a value that is not a FHIR Resource), it is reported as a reference to a contained Observation resource.

Qisqa tavsifAdditional information collected for the report
Izohlar

For individual measure reports, the supplementalData elements represent the direct result of evaluating the supplementalData expression for the subject of the report. For summary reports, supplementalData is reported as references to contained Observation resources that represent the number of times each value appeared as a supplementalData result for members of the population.

Boshqaruv0..*
TuriReference(Resource)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
675. MeasureReport.evaluatedResource
Ta'rif

Evaluated resources are used to capture what data was involved in the calculation of a measure. This usage is only allowed for individual reports to ensure that the size of the MeasureReport resource is bounded.

Qisqa tavsifWhat data was used to calculate the measure score
Izohlar

Evaluated resources are only reported for individual reports.

Boshqaruv0..*
TuriReference(Resource)
Modifikator hisoblanadifalse
Majburiy qo‘llab-quvvatlashfalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))